SLIM 5HD 00188312 - Power bank HAMA - Free user manual and instructions

USER MANUAL SLIM 5HD 00188312 HAMA

Line drawing of a rectangular electronic device with ports and a side panel (no text or symbols)

OperatingInstructions

Bedienungsanleitung

Moded'emploi

Instruccionesdeuso

Gebruiksaanwijzing

Istruzioniperl'uso

Instrukcjaobstugi

Használatiútmutató

Manualdeutilizare

Návodk p oužití

Návodnapoužitie

Manualdeinstruções

Bruksanvisning

Thankyouforchoosinga H amaproduct.

Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions onto thenewowner.

1. Explanationofwarningsymbolsandnotes

Warning

This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

Note

This symbol is used to indicate additional information or important notes.

High-densityLi-polymercells

This product contains high-density Li-polymer cells. High-density cells were developed primarily for smartphoneproductioninordertoaccommodatethenewveryhighdemandsintermsofcapacity andperformancewithsmallspacerequirements.ThesenewgenerationsofLi-polymercellsallowa lightweightandcompactdesignwithcomparativelyhighcapacity.

2.Packagecontents

• PowerPack"Slim5-HD"
• M micro-USBcable
  • T heseoperatinginstructions

3. Safetyinstructions

• U setheproductonlyfortheintendedpurpose.
- Protect the product from dirt, moisture and overheating and use it in dry environments only.
- Do not use the product in the immediate vicinity of heaters, other heat sources or in direct sunlight.
- As with all electrical products, this device should be kept out of the reach of children.
• D o n otdroptheproductanddonotexposeittoanymajorshocks.
- Do not operate the product outside the power limits specified in the technical data.
- Do not open the device or continue to operate it if it becomes damaged.
- Dispose of packaging material immediately in accordance with the locally applicable regulations.
- The battery is permanently installed and cannot be removed; dispose of the product as a whole in accordancewiththestatutoryregulations.
- Do not modify the product in any way. Doing so voids the warranty.
- Do not use the product in areas in which electronic products are not permitted.
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
• D o n otincineratethebatteryortheproduct.
- Do not tamper with or damage/heat/disassemble the batteries/rechargeable batteries.

4.Operation

4.1 ChargingthePowerPack

Warning-Battery

• Do not charge the power pack using your PC or the notebook. The charging currents can damagetheUSBportofthePC/notebook.
• O nlyusesuitablechargingdevicesorUSBconnectionsforcharging.
• As a rule, do not charge devices or USB connections that are defective and do not try to repair themyourself.
• Do not overcharge the product or allow the battery to completely discharge.
• A voidstoring, chargingorusingthedeviceinextremetemperaturesandextremelylow atmosphericpressure (forexample,athighaltitudes).
• When stored over a long period of time, batteries should be charged regularly (at least every three months).

- B eginchargingthepowerpackbyconnectingtheincludedMicro-USBcabletothepowerpack's port (IN 5V/1A) and to a suitable USB charger. Please refer to the operating instructions for the USBchargerused.

• C hargingbeginsandendsautomatically.

- Charge the Power Pack fully before using it for the first time.

Note-Capacity

• T hecapacityisalwaysshownwhenthePowerPackischarging.
- Each status LED corresponds to 25% of the capacity. When an LED is permanently illuminated, this indicates that this capacity level has already been reached. The Power Pack is charged to at least 75% if three LEDs are illuminated, and the fourth is flashing.
- I fallfourstatusLEDslightup,thefullcapacityisavailable.
- Press the button of the Power Pack to switch it on and to check its current capacity.
• To switch the power pack off, press and hold the button until the status LEDs go out.

4.2 Chargingterminaldevices

Warning- C onnectingterminaldevices

• Before connecting a terminal device, check whether the power output of the charger can supply sufficientpowerforthedevice.
• Ensure that the total power consumption of the connected terminal device does not exceed 1000mA.
• P leaserefertotheinstructionsintheoperatingmanualofyourterminaldevice.
• It is essential that you observe these specifications and the safety instructions regarding the powersupplyofyourdevices.
  • T hepowerpackmustnotbechargedanddischargedatthesametime!

Warning

• N everconnectthechargingcableofthePowerPacktoboththeinputandtheoutputofthe PowerPackatthesametime.Thiscoulddamagethebattery.
• Do not connect any terminal devices while the Power Pack is charging. This could damage the Power Packandtheconnecteddevice.

• Connect the included Micro-USB cable to the USB port on the power pack (OUT 5V/1A) and to the Micro-USBportonyourterminaldevice(mobilephone,smartphone,etc.).
• TheMicro-USBcharging/connectingcableincludedmaynotbesuitablefortheUSBconnectionon yourterminaldevice. In this case, use the USB cable that was included with your terminal device.
• Charging begins automatically. The status LEDs show the remaining capacity when the Power Pack ischarging.
• The current battery status of your terminal device will appear on this device.
• Press and hold the button on the power pack to stop charging and to switch the power pack off. ThestatusLEDsshouldswitchoff.
• The Power Pack will automatically switch off if it is not connected to a terminal device.

Note- O ptimisedcharging

OptimisedchargingmeansthatthePowerPackrecognisestheconnectedterminaldeviceand suppliesitwiththeoptimalcurrenttominimisechargingtime.Pleasenotethatthemaximum poweroutputofthepowerpackis1000mA.

5. Care and Maintenance

Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.

6.WarrantyDisclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or from failure to observe the operating instructions and/or safety notes.

7.TechnicalData

Micro-USBinput5 V 1 A	---
USB-A o utput5 V 1 A	---
Batterytype3.7V/Li-po(highdensity)
Min.capacity5000mAh/ 1 8.50Wh
Typ.capacity5100mAh/ 1 8.87Wh
UsableCapacity*3402mAh@ 5 V 1A	---

* The usable capacity is the capacity that can be drawn from the output sockets, measured at 5V output voltage and a draw current of 1A.