HP220PAR 011 - Vacuum Cleaner HOOVER - Free user manual and instructions

Product type	Canister vacuum cleaner
Brand	Hoover
Model	HP220PAR 011
Power supply	Mains (power cord)
Filtration type	Cyclonic (Airvolution separation system) + washable filters
Pre-motor filter	Washable, regular cleaning recommended
Exhaust filter	Washable, regular cleaning recommended
Main nozzle	Combined hard floor/carpet nozzle (GP) with floor type selector
Included accessories	Hose, telescopic tube, 2-in-1 crevice tool, mini turbo brush anti-hair (depending on model), parquet brush (depending on model)
Power control	Yes, on the body and on the handle
Cord rewinder	Yes, rewinding button
Parking and storage	Parking position and tube storage
Safety	Automatic shutdown in case of overheating, do not use on wet surfaces
Maintenance	Empty the dust container, clean filters and separation system regularly
Usage	Household use only
Spare parts	Available at Hoover dealers, specify model number
Warranty	According to local conditions, obtain from the dealer
Manufacturer	CANDY HOOVER GROUP S.r.l., Italy

Frequently Asked Questions - HP220PAR 011 HOOVER

How to empty the dust container of my Hoover HP220PAR 011 vacuum cleaner?

To empty the container, press the release button on the dust container and remove the entire container. Then press the flap release button to open the bottom of the container and empty the dust. Close the flap and reinstall the container.

How often should the vacuum cleaner filters be washed?

It is recommended to wash the filters after emptying the container 5 times, or more often if they are dirty. First tap the filters to remove dust, then wash them in warm water without detergent. Let them dry completely before reinserting.

What to do if my vacuum cleaner no longer sucks properly?

First check that the dust container is not full. Then check if the filters are dirty and clean them if necessary. Also check that there is no blockage in the tube, hose or nozzle. If the vacuum has overheated, let it cool down for 30 minutes.

Can I use the Hoover vacuum on wet surfaces?

No, do not use the appliance outdoors, on wet surfaces or to vacuum liquids. This could damage the appliance and pose an electrical risk.

How to adjust the suction power?

You can adjust the power in two ways: use the variable power control slider on the vacuum body, or the suction regulator on the handle that opens or closes an air valve.

How to assemble the vacuum for the first time?

Take all components out of the packaging. Connect the hose to the main body by turning and locking. Connect the handle to the telescopic tube, then the tube to the nozzle. Adjust the tube length using the adjustment button.

What accessories are supplied with the HP220PAR 011 model?

Depending on the model, accessories may include: a combined hard floor/carpet nozzle, a 2-in-1 crevice tool (flat and brush), a mini turbo brush for pet hair, and a parquet brush. Refer to the accessory list in the manual.

How to clean the separation system?

Remove the dust container, open the cover, then remove the pre-motor filter. Turn and lift the separation system to remove it. Rinse it in warm water without detergent. Dry completely before reassembling.

Where can I buy spare parts for my Hoover vacuum?

Hoover spare parts are available at authorized Hoover dealers. When ordering, specify the model number HP220PAR 011.

How to store the vacuum after use?

After use, turn off and unplug the appliance. Wind the cord using the cord rewinder button. Place the tube in storage position by hooking it on the back of the vacuum. Store it in a dry place.

USER MANUAL HP220PAR 011 HOOVER

This appliance should only be used for domestic cleaning, as described in this user guide. Please ensure that this guide is fully understood before operating the appliance.

Do not leave the appliance plugged in. Always switch off and remove the plug from the socket after use, or before cleaning the appliance or any maintenance task.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

If the power cord is damaged stop using the appliance immediately. To avoid a safety hazard, an authorised HOOVER service engineer must replace the power cord.

Keep hands, feet, loose clothing and hair away from rotating brushes.

Use only attachments, consumables or spares recommended or supplied by HOOVER.

Static electricity: Some carpets can cause a small build up of static electricity. Any static discharge is not hazardous to health.

Do not use your appliance out of doors or on any wet surface or for wet pick up.

Do not pick up hard or sharp objects, matches, hot ashes, cigarette ends or other similar items.

Do not spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours.

Do not run over the power cord when using your appliance or remove the plug by pulling on the power cord.

Do not continue to use your appliance if it appears faulty.

HOOVER service: To ensure the continued safe and efficient operation of this appliance we recommend that any servicing or repairs are only carried out by an authorised HOOVER service engineer.

Do not stand on or wrap the cord around arms or legs when using your appliance.

Do not use the appliance to clean animals or people.

Do not position the appliance above you when cleaning the stairs.

The Environment

The symbol on this appliance indicates that this appliance may not be treated as household waste. Instead it must be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this appliance, please contact your local city office, your household and waste disposal service or the shop where you purchased the appliance.

This appliance complies with the European Directives 2014/35/EU, 2014/30/EU and 2011/65/EU.

CANDY HOOVER GROUP S.r.l. Via Privata Eden Fumagalli, 20861 Brugherio (MB) Italy

GETTING TO KNOW YOUR CLEANER

A. Dust Bin Release Button
B. On/Off/Power Control Button
C. Power Control Silder
D. Exhaust Filter Cover Release Latch
E. Exhaust filter cover
F. Cord Reel Button
G. Dust Bin handle
H. Dust Bin Lid
I. Dust Bin
J. Cleaner Main Body
K. Hose end
L. Hose
M. Hose Handle
N. Suction Regulator
Q. Telescopic Tube
P. Telescopic Tube Adjuster
Q. Carpet and Floor Nozzle (GP)
R. Floor Type Selector Pedal
S. Exhaust Filter
T. Dust Bin flap Release Button
U. Separation System
V. Pre-motor filter
W. 2 in 1 Accessory
X. Pet Hair Remover Mini Turbo Nozzle
Y. Allergen Remover Mini Turbo Nozzle
Z. Parquet Nozzle

ASSEMBLING YOUR CLEANER

Remove all components from the packaging.

1. Connect the hose to the cleaner main body, ensuring it locks into position. To release: rotate the hose end and pull. [1]
2. Connect the hose handle to the end of the extension tube upper [2], or accessories if required.
3. Connect the extension tube lower to the carpet and floor nozzle** [3], or accessories if required.

USING YOUR CLEANER

1. Extract power cord and plug it into the power supply. Do not pull the cord beyond the red marker. [4]
2. Adjust the length of the telescopic tube by moving the telescopic tube adjuster up and raise or lower the hose handle to the most comfortable cleaning position. [5]
3. Carpet & Floor Nozzle*. Press the pedal on the nozzle [6] to select the ideal cleaning mode for the floor type.

Hard Floor: The brushes are lowered to protect the floor.

Carpet: With lifted brushes for the deepest clean.

1. Switch the cleaner on by pressing the On/Off button on the cleaner main body. [7]
2. Variable Power control: Adjust the power level by adjusting the power control slider*. [9]
3. Suction Regulator: Adjust the suction by opening or closing the air valve on the handle. [8]
4. Switch off the cleaner at the end of use by pressing the On/Off button. Unplug and press the cord reel button to wind the power cord back into the cleaner. [10]
5. Parking and Storage - The tube can be parked for temporary storage while in use, or in the storage position when not in use. [11]

ACCESSORIES

To obtain the best performance and efficiency it is recommended that the correct nozzles are used for the main cleaning operations. These nozzles are indicated in the diagrams by the letters GP, HF or CA.

A nozzle type GP can be used to clean both carpet and hard floor.

A nozzle type HF is suitable for use only on hard floor.

A nozzle of type CA is suitable for use only on carpet.

The other nozzles are accessories for specialist cleaning tasks and are recommended for occasional use only.

All accessories can be fitted to the end of the handle or the end of the telescopic tube.

2 In 1 Tool combines several functions into one tool:

Crevice Tool - For corners and hard to reach areas.

Dusting Brush - For bookshelves, frames, keyboards and other delicate areas.

Pet Hair Remover Mini Turbo Nozzle - Use the mini turbo nozzle on stairs or for deep cleaning on textile surfaces and other hard to clean areas. Particularly suitable for pet hairs removal.

Allergen Remover Mini Turbo Nozzle* - Use the mini turbo nozzle on stairs or for deep cleaning on textile surfaces and other hard to clean areas. Particularly suitable for allergen removal.

Parquet Nozzle* - For parquet floors and other delicate floors.

IMPORTANT: Do not use the Mini Turbo Nozzles on rugs with long fringes, animal hides and carpet pile deeper than 15mm . Do not keep the nozzle stationary while the brush is rotating.

CLEANER MAINTENANCE

Emptying the Dust Bin

When the dust reaches the max level indicator in the bin, empty the dust bin.

IMPORTANT: To maintain optimum performance do not allow the dust above the max level indicator.

1. Turn off the cleaner pressing the on/off button on the cleaner main body and unplug the power cable.
2. Press the dust bin release button and remove the dust bin assembly from the cleaner. [12]
3. Hold the dust bin with one hand and with the other hand press the dust bin flap release button. [13]
4. Close the dust bin flap and refit the dust bin assembly to the cleaner main body.

Cleaning the washable filters

The cleaner is fitted with a pre-motor filter and an exhaust filter. To maintain optimum cleaning performance regularly remove the filters and tap against the side of the bin to release dust. The filters should be washed every 5 bin empties or when the filter has excessive dust level.

IMPORTANT: All bagless cleaners require regular filter cleaning. Failure to clean your filters may result in air blockage, overheating and product failure. This may invalidate your guarantee.

IMPORTANT: Regularly check and maintain the filters.

IMPORTANT: Always ensure the filter pack is fully dry before use.

To access the pre-motor filter:

1. Press the dust bin release button and remove the dust bin assembly from the cleaner. [12]
2. Hold the dust bin with one hand and with the other hand rotate the dust bin lid to open the bin lid. [14]
3. Rotate and remove the pre-motor filter located in the dust bin. [15]
4. Gently tap and wash the pre-motor filter. Do not use hot water or detergents. Remove excess water from the filter and leave to dry fully before re-using. [19,20]
5. Reassemble the pre-motor filter to the dust bin once fully dry and refit to the cleaner.

*Certain Models Only

** Certain models only, nozzles may vary according to model

To access the exhaust filter:

1. Unlock the exhaust filter cover by pressing the latch and pulling outward from main cleaner. [17]
2. Remove the exhaust filter from recess by pulling the ribs of exhaust filter. [18]
3. Gently tap and wash the filter unit. Do not use hot water or detergents. Remove excess water from the filter and leave to dry fully before using. [19,20]
4. Reassemble the filter once it is fully dry and refit to the cleaner by inserting it back into the location and pushing it fully home.
5. Lock the exhaust filter cover by pressing the edge which has the clips, you will hear a click once the exhaust filter cover fits into place.

IMPORTANT: Do not use the product without the filters fitted.

Cleaning the dust bin /separation unit

This cleaner uses a separation system unique to Hoover. If necessary the separation unit can be disassembled from the dust bin and cleaned.

1. Press the dust bin release button and remove the dust bin assembly from the cleaner. [12]
2. Hold the dust bin with one hand and with the other hand rotate the dust bin lid to open the dust bin lid. [14]
3. Rotate and remove the pre-motor filter located in the dust bin. [15]
4. Rotate and remove the separation system from the dust bin. [16]
5. If necessary, use a cloth to remove excessive dust from the separation system.
6. Place the separation system under the tap water. [19] Rinse with lukewarm water. Wash internal surfaces of the dust bin with water only. DO NOT use soap detergents to wash the internals of the dust bin.
7. Reassemble the internal component to the dust bin, ensuring all components are dry.
8. Close over the dust bin lid and refit dust bin assembly to cleaner.

Removing a blockage

1. Check if the dust bin is full. If so refer to 'Emptying the dust bin'.
2. If the dust bin is empty but suction is still low:

A. Do the filters need cleaning? If so refer to 'Cleaning the washable filters'
B. Check if there is any other blockage in the system - Use a rod or pole to remove any blockage from the extension tube or flexible hose.
C. Check if pre-motor filter is fitted.
D. Check if the separation unit needs to be cleaned. Refer to 'Cleaning the separation unit'.

GBF

USER CHECKLIST

Should you have a problem with the product, complete this simple user checklist before calling your local Hoover service.

• Is there a working electricity supply to the cleaner? Please check with another electrical appliance.
• Is the dust bin over-filled? Please refer to 'Cleaner Maintenance'.
• Is the Filter blocked? Please refer to 'Cleaning the filter'.
• Is the hose or nozzle blocked? Please refer to 'Removing a blockage from the system'.
• Has the cleaner overheated? If so, it will take approximately 30 minutes to automatically reset.

IMPORTANT INFORMATION

Hoover spares and Consumables

Always replace parts with genuine Hoover spares. These are available from your local Hoover dealer or direct from Hoover. When ordering parts always quote your model number.

Hoover Service

Should you require service at any time, please contact your local Hoover Service Office.

Quality

Hoover's factories have been independently assessed for quality. Our products are made using a quality system which meets the requirements of ISO 9001.

Your Guarantee

The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold. Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

Subject to change without notice.

INSTRUCTIONS DE SECURITE D'UTILISATION

In caso di problemi, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, completeness, Completeness

NAVODILA ZA VARNO UPORABO