39001480 - Vacuum Cleaner HOOVER - Free user manual and instructions

Product type	Vacuum cleaner
Brand	Hoover
Model	39001480
Vacuum type	Canister
Dimensions (L x W x H)	45 x 30 x 25 cm
Weight	6.5 kg
Power supply	Mains (8 m cable)
Power	800 W
Tank capacity	1.5 L
Collection type	Bagless (dust container)
Filtration	HEPA
Noise level	76 dB(A)
Operating radius	10 m
Included accessories	Crevice tool, parquet brush, furniture nozzle
Main functions	Vacuuming hard floors and carpets, power adjustment
Maintenance and cleaning	Washable filter cleaning every 3 uses, wash dust container
Safety	Unplug before any intervention, do not vacuum liquids
Spare parts	Filters, brush, hose available from Hoover after-sales service
Repairability	Estimated repairability index 8/10
Warranty	2 years

Frequently Asked Questions - 39001480 HOOVER

How to clean the filter of my Hoover 39001480 vacuum cleaner?

To clean the filter, remove the dust container, take out the HEPA filter and tap it to remove dust. If it is very dirty, wash it with lukewarm water without detergent, dry it completely before putting it back. Never use the filter when wet.

How to empty the dust container?

Press the dust container ejection button, remove it and empty its contents into a trash can. You can wash the container with soapy water, dry it before putting it back.

My vacuum cleaner loses suction, what to do?

First check if the dust container is full or if the filter is clogged. Clean the filter (see previous question). Also check the hoses and hose for blockages, and remove any obstructing objects.

What is the power of this vacuum cleaner?

The Hoover 39001480 vacuum cleaner has a power of 800 W, providing efficient suction for all types of floors.

Can I vacuum liquids with this vacuum cleaner?

No, this vacuum cleaner is designed only for dry. Never vacuum liquids, this would damage the appliance and pose an electrical risk.

Where to find spare parts for the Hoover 39001480?

Spare parts (filters, bags if applicable, brushes, hoses) are available on the official Hoover website or from authorized after-sales service. Use the model number to order.

How to connect the hose and tubes?

Insert the hose into the suction opening of the appliance until it clicks. Then, fit the tubes together and connect the desired accessory. To disassemble, press the release buttons.

How to use the parquet brush?

The parquet brush is specially designed for hard floors. Attach it to the tube and adjust the power to a suitable mode (soft felt). Avoid using it on thick carpets.

How to adjust the suction power?

The power is adjusted via a dial located on the vacuum cleaner body or the hose. Turn the dial to increase or decrease suction according to the floor type (minimum for curtains, maximum for carpets).

What to do if the vacuum cleaner stops during use?

This may be due to overheating or a clogged filter. Turn off the appliance, unplug it and let it cool for 30 minutes. Clean the filter and the container. If the problem persists, contact after-sales service.

USER MANUAL 39001480 HOOVER

On-site detection, monitoring data, reporting results

INSTRUCTIONS FOR SAFE USE

This appliance should only be used for domestic cleaning, as described in this user guide. Please ensure that this guide is fully understood before operating the appliance.

Do not leave the appliance plugged in. Always switch off and remove the plug from the socket after use, or before cleaning the appliance or any maintenance task.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

If the power cord is damaged stop using the appliance immediately. To avoid a safety hazard, an authorised HOOVER service engineer must replace the power cord.

Keep hands, feet, loose clothing and hair away from rotating brushes.

Use only attachments, consumables or spares recommended or supplied by HOOVER.

Static electricity: Some carpets can cause a small build up of static electricity. Any static discharge is not hazardous to health.

Do not use your appliance out of doors or on any wet surface or for wet pick up.

Do not pick up hard or sharp objects, matches, hot ashes, cigarette ends or other similar items.

Do not spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours.

Do not run over the power cord when using your appliance or remove the plug by pulling on the power cord.

Do not continue to use your appliance if it appears faulty.

HOOVER service: To ensure the continued safe and efficient operation of this appliance we recommend that any servicing or repairs are only carried out by an authorised HOOVER service engineer.

Do not stand on or wrap the cord around arms or legs when using your appliance.

Do not use the appliance to clean animals or people.

Do not position the appliance above you when cleaning the stairs.

The Environment

The symbol on this appliance indicates that this appliance may not be treated as household waste. Instead it must be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this appliance, please contact your local city office, your household and waste disposal service or the shop where you purchased the appliance.

This appliance complies with the European Directives 2014/35/EU, 2014/30/EU and 2011/65/EU.

CANDY HOOVER GROUP S.r.l. Via Privata Eden Fumagalli, 20861 Brugherio (MB) Italy

GETTING TO KNOW YOUR CLEANER

A. Suction Regulator B. Hose Handle C. Telescopic Tube D. On/Off Pedal E. Exhaust filter cover F. Carpet & Floor nozzle (GP)** F1. Carpet Nozzle (CA)** F2. Hard Floor Nozzle (HF)** G. Floor type selector pedal H. Park Slot I. Cord reel Pedal J. Cleaner Main Body

K. Hose L. Dust Container lid M. Dust Container N. Vortex Finder O. Pre-motor Filter P. Dust Container Release Button Q. Exhaust Filter R. 2 in 1 accessory S. Pet Hair Remover Mini Turbo Nozzle# T. Allergen Remover Mini Turbo Nozzle* U. Grand Turbo nozzle* V. Parquet Nozzle*

ASSEMBLING YOUR CLEANER

Remove all components from the packaging.

1. Connect the hose to the cleaner main body, ensuring it clips and locks into position. [1]
2. To release: simply press the button on the hose end and pull.
3. Connect the hose handle to the upper extension tube end [2], or accessories if required.
4. Connect the extension tube lower end to the carpet and floor nozzle [3] or accessories if required.

USING YOUR CLEANER

1. Extract power cord and plug it into the power supply. Do not pull the cord beyond the red marker. [4]
2. Adjust the telescopic tube to the desired height by moving the telescopic tube adjuster up and raise or lower the handle to the most comfortable cleaning position. [5]
3. Carpet & Floor Nozzle**. Press the floor type selector on the nozzle [6] to select the ideal cleaning mode for the floor type.

Hard Floor – Brushes are lowered to protect the floor.

Carpet – Brushes are raised for the deepest clean.

1. Switch the cleaner on by pressing the on/off Pedal on the cleaner main body. [7]
2. Adjust the suction regulator on the handle to the desired level.
3. Switch off at the end of use by pressing the on/off Pedal. Unplug and press the cord reel pedal to wind the power cord back into the cleaner.

PARKING AND STORAGE SECTION

The tube and nozzle can be parked on back of the cleaner for storage or temporary storage while in use.

ACCESSORIES

To obtain the best performance and efficiency it is recommended that the correct nozzles are used for the main cleaning operations. These nozzles are indicated in the diagrams by the letters GP, HF or CA.

A nozzle type GP can be used to clean both carpet and hard floor.

A nozzle type HF is suitable for use only on hard floor.

A nozzle of type CA is suitable for use only on carpet.

The other nozzles are accessories for specialist cleaning tasks and are recommended for occasional use only.

All accessories can be fitted to the hose handle or the end of the tubes.

2 in 1 Tool combines several functions into one tool:

Crevice Tool – For corners and hard to reach areas.

Dusting Brush – For bookshelves, frames, keyboards and other delicate areas.

Pet Hair Remover Mini Turbo Nozzle* - Use the mini turbo nozzle on stairs or for deep cleaning on textile surfaces and other hard to clean areas. Particularly suitable for pet hairs removal.

Allergen Remover Mini Turbo Nozzle* - Use the mini turbo nozzle on stairs or for deep cleaning on textile surfaces and other hard to clean areas. Particularly suitable for allergen removal.

Parquet Nozzle* – For parquet floors and other delicate floors.

IMPORTANT: Do not use the Mini Turbo Nozzles on rugs with long fringes, animal hides and carpet pile deeper than 15mm. Do not keep the nozzle stationary while the brush is rotating.

CLEANER MAINTENANCE

Emptying the Dust Container

When the dust reaches the max level indicator on the container, empty the dust container.

IMPORTANT: To maintain optimum performance, do not allow the dust to exceed the max level. 1. Turn off the cleaner with the main switch and unplug the power cable. 2. Press the bin release button and remove the bin assembly from the cleaner. [8] 3. Hold the dust container with one hand, and remove the dust container lid by rotating anti-clockwise. [9] 4. Remove the pre-motor filter assembly from bin assembly. [10] 5. Remove the Vortex Finder from bin assembly. [11] 6. Empty the dust from the bin. [12] 7. Refit the vortex finder and pre-motor filter assembly to bin assembly. 8. Refit the dust container lid to bin assembly. 9. Close and refit to the cleaner main body.

Cleaning the Washable Filters

The cleaner is fitted with a pre-motor filter and an exhaust filter. To maintain optimum cleaning performance, regularly remove the filters and tap them against the side of the bin to release dust. The filters should be washed every 5 cassette empties or when the filter has an excessive dust level.

IMPORTANT: All bagless cleaners require regular filter cleaning. Failure to clean your filters may result in air blockage, overheating, and product failure. This may invalidate your guarantee.

IMPORTANT: Regularly check and maintain the filters.

IMPORTANT: Always ensure the filter pack is fully dry before use.

To access the filter:

1. Remove the dust container from the cleaner. [8]
2. Hold the dust container with one hand, and remove the dust container lid by rotating it anti-clockwise. [9]
3. Remove the pre-motor filter assembly from the bin assembly. [10]
4. Gently tap and wash the pre-motor filter. Do not use hot water or detergents. Remove excess water from the filter and leave it to dry fully before re-using. [13] [17]
5. Reassemble the pre-motor filter assembly once fully dry and refit it to the cleaner.

To access the exhaust filter:

1. Unclip the exhaust filter cover from the rear of the cleaner main body. [14]
2. Remove the exhaust filter from the rear of the cleaner. [15]
3. Gently tap and wash the filter using warm water. Do not use hot water or detergents. Remove excess water from the filter and leave it to dry fully before re-using. [16] [17]
4. Refit the exhaust filter to the rear of the cleaner once fully dry and refit the exhaust filter cover.

IMPORTANT: Do not use the product without the filter pack fitted.

Cleaning the dust container / separation unit

This cleaner uses a separation system unique to Hoover. If necessary the separation unit can be disassembled from the dust container and cleaned.

1. Press the dust container release button and remove the bin assembly from the cleaner. [8]
2. Hold the bin with one hand and with the other hand remove the dust container lid by rotating anti-clockwise. [9]
3. Remove the dust container lid by rotating anti-clockwise. And remove the pre-motor filter from dust container assembly. [10] And then remove the vortex finder from the dust container by pulling. [11]
4. If necessary, use a cloth to remove excessive dust from the vortex finder surface. Reassemble the internal components to the bin.
5. Reassemble the dust container lid to the dust container. Refit the dustbin to the cleaner.

Removing a blockage

1. Check if the Dust Container is full. If so, refer to 'Emptying The Dust Container'.
2. If the Dust Container is empty, but suction is still low: A. Do the filters need cleaning? If so, refer to 'Cleaning the Washable Filters'. B. Check if there is any other blockage in the system - Use a rod or a pole to remove any blockage from the tubes or hose.

C. Check for and clear any blockage in the nozzle.

D. Check if the separation unit needs to be cleaned. Refer to 'Cleaning the separation unit'.

WARNING - If the cleaner is used for a significant period of time with a blockage, a thermal cut out will switch the cleaner off to prevent overheating. If this should happen, switch the cleaner off, unplug and correct the fault. It will take about 45 minutes for the cut out to automatically reset.

USER CHECKLIST

Should you have a problem with the product, complete this simple user checklist before calling your local Hoover service.

• Is there a working electricity supply to the cleaner? Please check with another electrical appliance.
• Is the dust container over-filled? Please refer to 'Cleaner Maintenance'.
• Is the filter blocked? Please refer to 'Cleaner Maintenance'.
• Is the hose or nozzle blocked? Please refer to 'Removing a blockage from the system'.
• Has the cleaner overheated? If so, it will take approximately 30 minutes to automatically reset.

IMPORTANT INFORMATION

Hoover Spares and Consumables

Always replace parts with genuine Hoover spares. These are available from your local Hoover dealer or direct from Hoover. When ordering parts always quote your model number.

Quality

Hoover's factories have been independently assessed for quality. Our products are made using a quality system which meets the requirements of ISO 9001.

Your Guarantee

The guarantee conditions for this appliance are as defined by our representative in the country in which it is sold. Details regarding these conditions can be obtained from the dealer from whom the appliance was purchased. The bill of sale or receipt must be produced when making any claim under the terms of this guarantee.

Subject to change without notice.

SAFETY INSTRUCTIONS FOR USE

MAINTENANCE OF THE VACUUM CLEANER

A. Suction power regulator

B. Hose handle

C. Telescopic tube

D. On/off pedal

SAFETY INSTRUCTIONS FOR USE