FB1500D020C80 - Compressor Vevor - Free user manual and instructions
Find the device manual for free FB1500D020C80 Vevor in PDF.
User questions about FB1500D020C80 Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Compressor in PDF format for free! Find your manual FB1500D020C80 - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FB1500D020C80 by Vevor.
USER MANUAL FB1500D020C80 Vevor
Technical Support and E-Warranty Certificate www.vevor.com/support
HORIZONTAL AIR COMPRESSOR
MODEL: FB750D0-10C18/FB750D0-10C30 FB1500D0-10C40/FB1500D0-10C60/FB1500D0-20C80
We continue to be committed to provide you tools with competitive "Save Half", "Half Price" or any other similar expressions used by represents an estimate of savings you might benefit from buying cer with us compared to the major top brands and does not necessarily cover all categories of tools offered by us. You are kindly reminded carefully when you are placing an order with us if you are actually in comparison with the top major brands.
VEVOR®
TOUGH TOOLS, HALF PRICE
HORIZONTAL AIR COMPRESSOR
Appearance pictures (different models may have differences in appearance, please refer to actual product or website information accuracy)
High flow supply
Oil-free
Low noise
Low vibration
Low temperature rise
high pressure
High speed silenced motor
Four protection
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel fr contact us:
Technical Support and E-Warranty Certificate www. vvor. com/support
This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you if there are any technology or software updates on our product
INSTRUCTIONS
Preface
First of all, let us express our heartfelt thanks to our customers who have purchased our equipment. This manual is for customer service to make better Written with this equipment. Hope the company's products and services to bring you the canal courtesy.
Important reminder
For your own safety, before assembling and using such products, you must first read this manual to clarify the unique operation, application, and possible problems of this equipment.
Describe
The oil-free compressor is designed specifically for self-service users in various household and automotive operations. These compressors provide power for spray guns, impact wrenches, and other tools. These devices can operate with oil. The compressed air from the device will contain moisture. If the application requires dry air, please install a water filter or air dryer.
Safety signs
In this operating manual and on the machine, safety symbols and warning we are used to convey important safety information. This section will help you enhance your understanding of these safety symbols and warning words.
DANGER!
Danger indication Emergency situations, if not avoided, can lead to death or serious injury.
WARNING!
Warning indicator A potentially dangerous situation, if not avoided, can lead to death or serious injury.
CAUTION!
Caution indicates a hazardous situation, which, if not avoided, MAY result in m or moderate injury.
▲NUTICE!
Notice indicates important information that if not followed, MAY cause damage equipment.
Unpicking
After unpacking the unit, inspect carefully for any damage that may have occurred during transit. Make sure to tighten fittings, bolts, etc, before putting unit into service.
WARNING!
Do not operate unit if damaged during shipping. Handling or use.Damage may result in bursting and cause injury or property damage.
DANGER!
Breathable Air Warning
This compressor is not equipped and should not be used "as is " to supply breathing quality air.
For any application of air for human consumption, the air compressor will need be fitted with suitable in-line safety and alarm equipment. This additional equipment is necessary to properly filter and purify the air to meet minimal specifications for Grade D breathing as described in Compressed Gas Specification Association Commodity G7.1-1966.OSHA 29 CFR 1910.134. and/or Canadian Standards Associations (CSA)
GENERAL SAFETYINFORMATION
Due to the use of air compressors and other components (material pump springs, filters, lubricators, hoses, etc.), which form a high-pressure pumping syste the following safety measures must always be followed:
- Carefully read all manuals included with this product to thoroughly familiarize yourself with the control and correct use of the equipment.
- Comply with all local electrical and safety regulations, as well as the National Electrical Code (NEC) and Occupational Safety and Health Act (OSHA) in the United States.
- Only people familiar with these safety operating rules can use the compres
-
Keep visitors away and never allow children to enter the work area.
-
When operating pumps or devices, please wear safety glasses and use her protection.
- Do not stand or use the pump or device as a handle.
- Before each use, check the compressed air system and electrical components for signs of damage, deterioration, weakness, or leakage. Repair or replace defective items before use.
- Check all fasteners for tightness at regular intervals.
▲WARNING!
Equipment and control devices can generate arcs, igniting flammable gases or vapors. Do not operate or repair in or near flammable gases or vapors. It is prohibited to store flammable liquids or gases near the compressor.
CAUTION!
Even if the unit stops, the compressor components may still be hot.
- Keep your fingers away from the running compressor, as moving quickly a overheating components can cause injury and/or burns.
- If the equipment begins to vibrate abnormally, please stop the engine/mot and immediately check the cause. Vibration is usually a warning of a malfund To reduce the risk of fire, the exterior of the engine/motor should be kept fir solvents, or excessive lubricating grease.
DANGER!
Do not attempt to repair or modify the fuel tank! Welding, drilling, or other modification can weaken the tank, leading to tank rupture or
explosion damage. Be sure to replace worn or damaged fuel tanks.
▲WARNING!
Never remove or attempt to adjust safety valve. Keep safety valve free from and other accumulations.
WARNING! Drain liquid from tank daily
- Tanks rust from moisture build-up, which weakens the tank. Make sure to tank regularly and inspect periodically for unsafe conditions such as rust forms and corrosion.
- Fast moving air will stir up dust and debris. which may be harmful. Release slowly when draining moisture depressurizing the compressor system.
SPRAYING PRECAUTIONS
▲WARNING!
Do not spray flammable materials in vicinity of open flame or near ignition s including the compressor unit.
- Do not smoke when spraying paint, insecticides, or other flammable substances.
- Use a face mask/respirator when spraying and spray in a well ventilated to prevent health and fire hazards.
- Do not spray paint or other spraying materials directly onto the compressor. Place the compressor as far away from the spraying area as possible to minimize the accumulation of excessive spray on the compressor.
- When spraying or cleaning with solvents or toxic chemicals, follow the instructions provided by the chemical manufacturer.
ASSEMBLY
WHEEL ASSEMBLY
Different product accessories are different, mainly divided into wheels and foot pads. Please check the accompanying accessory package before installation or install the corresponding wheels and foot pads according to the following diag
MAIN TECHNICAL DATA
| Model | Working voltage | Rated power | Rated current | Pressure Range | Air displacement | SPEED |
| FB750D0-10C18 | 220-240 /50Hz | 1.0HP | 3.2A | 6-8Bar | 2.0CFM@ 90Psi | 2800RPM |
| FB750D0-10C30 | 220-240/50Hz | 1.0HP | 3.5A | 6-8Bar | 2.0CFM@90Psi | 2800RPM |
| FB1500D0-10C40 | 220-240/50Hz | 2.0HP | 7.5A | 6-8Bar | 5.3CFM@90Psi | 1400RPM |
| FB1500D0-10C60 | 220-240/50Hz | 2.0HP | 7.5A | 6-8Bar | 5.3CFM@90Psi | 1400RPM |
| FB1500D0-20C80 | 220-240/50Hz | 4.0HP | 15.0A | 6-8Bar | 10.6CFM@90Psi | 1400RPM |
| Model | Working voltage | Rated power | Rated current | Pressure Range | Air displacement | SPEED |
| FB750D0-10C18 | 120V/60Hz | 1.0HP | 6.5A | 90-120 Psi | 2.2CFM@ 90Psi | 3450RPM |
| FB750D0-10C30 | 120V/60Hz | 1.0HP | 6.5A | 90-120 Psi | 2.2CFM@ 90Psi | 3450RPM |
| FB1500D0 -10C40 | 120V/60Hz | 2.0HP | 13.5A | 95-125 Psi | 5.3CFM@ 90Psi | 1700RPM |
| FB1500D0 -10C60 | 120V/60Hz | 2.0HP | 13.5A | 95-125 Psi | 5.3CFM@ 90Psi | 1700RPM |
| FB1500D0 -20C80 | 220V/60Hz | 4.0HP | 15.0A | 95-125 Psi | 10.6CFM@ 90Psi | 1700RPM |
Electrical schematic diagram
Install
Position
It is very important to install the compressor in a clean and well ventilated | The minimum gap between the compressor and the wall is 18 inches, as ob can obstruct the airflow, and the surrounding air temperature should not exceed 100^ F.
CAUTION!
Do not locate the compressor air inlet near steam, paint spray,sandblast area any other source of contamination, This debris will damage the motor.
ELECTRICAL INSTALLATION
WARNING!
All wiring and electrical connections should be carried out by qualified electric Installation must comply with local regulations and national electrical regulations
CAUTION!
Never use an extension cord with this product.Use additional air hat instead of an extension cord to avoid power loss and permanent in damage, Use of an extension cord voids the warranty.
DANGER!
Improper use of grounding plug can result in a possible risk of electric shock!
DANGER!
Do not use a grounding adapter with this product!
- If repair or replacement of cord or plug is necessary, do not connect growire to either flat blade terminal. The wire with insulation having an external surface that is green (with or without yellow stripes)is the grounding wire.
WARNING!
Never connect green (or green and yellow) wire to a live terminal.
- Check with a qualified electrician or serviceman if grounding instructions are completely understood, or if in doubt as to whether product is properly grounded
Do not modify plug provided; if it will not fit outlet, have proper outlet installed qualified electrician.
WARNING!
-
Local electrical wiring codes differ from area to area. Source wiring, plug a protector must be rated for at least the amperage and voltage indicated motor nameplate, and meet all electrical codes for this minimum.
-
Use a slow blow fuse or a circuit breaker.
OPERATION
Pressure Switch-Auto/Of Switch-In the AUTO position, the compressor shuts c automatically when tank pressure reaches the maximum preset pressure. In the OFF position, the compressor will not operate. This switch should be in the O position when connecting or disconnecting the power cord from the electrical or when changing air tools.
Regulator-The regulator controls the amount of air pressure released at the h outlet.
Safety valve-This valve automatically releases air if the tank pressure exceeds the preset maximum.
Discharge Tube-This tube carries compressed air from the pump to the cheek valve. This tube becomes very hot during use. To avoid the risk of severe I never touch the discharge tube.
Check Valve-A one-way valve that allows air to enter the tank, but prevents the tank from flowing back into the compressor pump.
Handle-Designed to move the compressor.
WARNING!
Never use the handle on wheeled units to lift the unit completely off the gro. Drain Petcock-This valve is located on the bottom of the tank. Use this valve drain moisture from the tank daily to reduce the risk of corrosion.
Reduce tank pressure below 10 psi, and then drain moisture from tank daily avoid tank corrosion. Drain moisture fir om tank by opening the drain petcocl located underneath the tank.
LUBRICATION
This is an oilless product and DOES NOT require lubrication to operate.
BREAK-IN PROCEDURE
CAUTION!
Do not attach air chuck or other tool to open end of hose until start-up has completed and unit checks ok.
IMPORTANT: Do not operate compressor before reading instructions or damag may result.
- Turn regulator fully clockwise to open air
- Turn switch to OFF position and plug in
cord.
- Turn switch to AUTO position and run u
30 minutes to break in the pump parts. - Turn regulator knob fully
counterclockwise. Compressor will build to maximum preset pressure and shut off.
5. Turn regulator knob clockwise to cause a bleed off. Compressor will restart at a preso pressure.
6. Turn regulator knob counterclockwise to off the air and turn switch to off position.
7. Attach chuck or other tool to open end of hose. Turn the regulator on. In AUTO position, the compressor pumps air into the tank. It shuts off automatica when unit reaches its maximum preset pressure. In the OFF position.the pres switch cannot function and the compressor will not operate. Make sure switch OFF positionconnectingwhen01disconnecting power cord from electrical outlet.
Figure 4
NOISTUREIN COMPRESSED AIR
Moisture in compressed air will form into droplets as it comes from an air compressor pump. When humidity is high or when a compressor is in continu use for an extended period of time, this moisture will collect in the tank. Wl
using a paint spray or sandblast gun.this water will be carried from the tank through the hose, and out of the gun as droplets mixed with the spray mate. IMPORTANT: This condensation will cause water spots in a paint job, especially when spraying other than water based paints. If sandblasting, it will cause the sand to case and clog the gun rendering it ineffective. A filter in the air line (MP3105), located as near to the gun as possible, will help eliminate this mode
SAFETY VALVE
WARNING!
Do not remove or attempt to adjust the valve! This valve should be checked under pressure occasionally by pulling the ring hand. If air leaks after ring has been removed or valve is stuck and cannot be actuated, it MUST be replaced.
REGULATOR KNOB (figure 5)
- This knob controls air pressure to an air-operated tool or paint spray gun.
- Turn clockwise to increase air pressure
outlet. When desired pressure is reached, locked with nuts.
3.To lower air pressure at outlet, turning counterclockwise.
4. Turn fully counterclockwise to shut off flow of air completely then push down.
TANK PRESSURE GAUGE
Gauge shows pressure in tank indicating compressor is building pressure prop
MAINTENANCE
WARNING!
Disconnect power source then release all pressure from the system before attempting to install,service, relocate or perform any maintenance
Check compressor often for any visible problem sand follow maintenance procedures each time compressor is used.
- Pull ring on safety valve and allow it to snap back to normal position.
Figure 5:
WARNING!
Safety valve must be replaced if it cannot be actuated or it leaks air after fire released.
- Turn compressor off and release pressure from system, Drain moisture from tank by opening drain cock underneath tank.
- Clean dust and dirt from motor, tank, and airlines and pump cooling fins compressor is still OFF.
IMPORTANT: Position the device away from the spraying area, as the hose prevent excessive spraying from clogging the filter.
LUBRICATION
This is an oil-free compressor that requires no lubrication.
CAUTION!
This compressor is equipped with an automatic reset thermal overload protector which will shut off motor if it becomes overheated,
If thermal overload protector shuts motor OFF frequently, look for the following causes.
- Low voltage.
- Clogged air filter.
- Lack of proper ventilation.
CAUTION!
If the thermal overload protector is activated, the motor must be allowed to end down before starting. The motor will automatically restart without warning if left the power socket and the unit is turned on.
Storage
1 . When not in use , store the hoses and compressor in a cool and dry place
2. Moisture in the drainage tank.
3 . Disconnect the hose and hang the open end downwards to allow water to
TROUBLESHOOTING CHART
| Symptom | Possible Cause (s) | Corrective Action |
| The compressor | 1. No electricity | 1. Is it plugged in? Check for |
| cannot run | 2. Brown fuse 3. Circuit breaker connected 4. Thermal overload open circuit 5. The pressure switch is broken | fuses/circuit breakers or motor overload 2. Replace the blown fuse 3. Reset and determine the car of the problem 4. After the motor cools down, will restart 5. Replacement |
| Symptom | Possible Cause (s) | Corrective Action |
| The motor hums but cannot operate or runs slowly | 1. Check valve defective or not loaded 2. Poor contact and low voltage 3. Motor winding short circ or open circuit | 1. Replacement or repair 2. Check the connection. If usi an extension plug, clear it and check the circuit with a voltmeter 3. Replace the motor Danger: Do not disassemble the check valve when there is air the fuel tank; Air release tank |
| Be careful when the fuse burns out/the circuit breaker trips repeatedly! Do no use extension cords with this product | 1. Incorrect fuse size, circuit overload 2. Check valve defective or not loaded | 1. Check if the fuse is correct use a delay fuse. Disconnect c electrical appliances from the circuit or operate the compressor on its own branch circuit 2. Do not disassemble the che valve when there is air in the tank during replacement or replace Air release tank |
| Thermal overload protector repeatedly loses power | 1. Low voltage 2. Clogged air filter 3. Lack of proper ventilation/room temperature too high 4. Check valve malfunction 5. Compressor valves failed | 1. Eliminate extension cord, check with voltmeter 2. Clean filter (see Maintenance section) 3. Move compressor to well ventilated area 4. Replace |
| 5. Replace valve assembly | ||
| Knocking sound, noise, excessive vibration | 1. Loose bolts and uneven fuel tank2. Defective bearings on eccentric or motor shafts3. Worn or scored cylinders piston rings | 1. Tighten the gasket box bolts horizontal position2. Replacement3. Replace or repair as necess |
| TroubleshootingChart (Continued)Symptom | Possible Cause (s) | Corrective Action |
| The oil tank pressure drops when the compressor is turned off | 1. Loose drain cock2. Check valve leakage3. Loose connection of pressure switch or regulator | 1. Tightening2. Disassemble the check valve assembly, clean or replace it3. Check all connections with s and aqueous solution and tight them tightly |
| The continuous operation of the compressor results in a discharge volume below normal/low discharge pressure | 1. Excessive air usage and compressor too small2. The intake filter is block3. Pipeline leakage (on the machine or in external systems)4. Damaged inlet valve5. Wear of piston rings | 1. Reduce usage or purchase through higher air delivery (SCF2. Cleaning or replacement3. If necessary, replace the leaf parts or tighten them4. Replace the compressor valve5. Replace the piston and cylin |
| Excessive moisture in discharge air | 1. Excessive water in tank2. High humidity | 1. Drain tank2. Move to area of less humid use air line filter |
| Compressor runs continuously and safety valve opens as pressure rises | 1. Defective pressure switch2. Defective safety valve | 1. Replace switch2. Replace safety valve with genuine replacement part |
| Excessive starting | Excessive condensation in | Drain more often |
| and (auto start) stopping | tank | |
| The unloader on the pressure switch is leaking air | Check valve stuck in an o position | Remove and replace check valv |
Correct Disposal
This product is subject to the provision of european Directive 2012/19
The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. Th
applies to the product and all accessories marked with this symbol. Products
marked as such may not be discarded with normal domestic waste, but must taken to a collection point for recycling electrical and electronic devices.
Manufacturer: Shanghaiuxinmuyeyouxianggsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
YH CONSULTING LIMITED.
C/O YH Consulting Limited Office 147,
Centurion House, London Road,
Staines-upon-Thames, Surrey, TW18 4AX
E-CrossStu GmbH
Mainzer Landstr.69, 60329 Frankfurt am Ma
VEVOR®
TOUGH TOOLS, HALF PRICE
Technical Support and E-Warranty Certificate
www.vevor.com/support
VEVOR®
TOUGH TOOLS, HALF PRICE
Assistance technique et certificat de garantie electronique www.vevor.com/support
COMPRESSEUR D'AIR HORIZONTAL
MODELE: FB750D0-10C18/FB750D0-10C30
FB1500D0-10C40/FB1500D0-10C60/FB1500D0-20C80
High speed silenced motor
Four protection
BESOIN D'AIDE? CONTACTEZ-NOUS!
A/S YH Consulting Limited Bureau 147, Centurion
House, London Road, Staines-upon
Thames, Surrey, TW18 4AX
High speed silenced motor
Four protection
C/O YH Consulting Limited Office 147, Centurion
House, London Road, Staines-upon
Thames, Surrey, TW18 4AX
E-CrossStu GmbH
Mainzer Landstr.69, 60329 Frankfurt am Main.
VEVOR
TOUGH TOOLS, HALF PRICE
www.vevor.com/support
VEVOR®
TOUGH TOOLS, HALF PRICE
High speed silenced motor
Four protection
Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122
Australia
Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga,
CA 91730
CONSULENZA YH LIMITATA.
C/O YH Consulting Limited Ufficio 147, Centurion
House, London Road, Staines-upon
Thames, Surrey, TW18 4AX
E-CrossStu GmbH
Mainzer Landstr.69, 60329 Francoforte sul Meno.
VEVOR
TOUGH TOOLS, HALF PRICE
elettronica www.vevor.com/support
VEVOR
TOUGH TOOLS, HALF PRICE
Soporte专业技术 y certificate de garantia electrònica www.vevor.com/support
COMPRESOR DE AIRE HORIZONTAL
MODELO:FB750D0-10C18/FB750D0-10C30
FB1500D0-10C40/FB1500D0-10C60/FB1500D0-20C80
High speed silenced motor
Four protection
NECESITAS AYUDA? iCONTÁCTANOS!
Mango:性和功能 Mango: design and function Advertability Advertability
Centurion House, London Road,
Staines-upon-Thames, Surrey, TW18 4AX
E-CrossStu GmbH
Mainzer Landstr.69, 60329 Francfort del Meno.
VEVOR
TOUGH TOOLS, HALF PRICE
High speed silenced motor
Four protection
POTRZEBUJESZ POMOCY? SKONTAKTUJ SIE Z NAMI!
C/O YH Consulting Limited Biuro 147,
Centurion House, London Road,
Staines-upon-Thames, Surrey, TW18 4AX
| Przedstawciel UE |
E-CrossStu GmbH
Mainzer Landstr.69, 60329 Frankfurt nad Menem.
VEVOR
TOUGH TOOLS, HALF PRICE
High speed silenced motor
Four protection
HULP NODIG? NEEM CONTACT MET ONS OP!
PROBLEEMOPLossingSSSCHEMA
C/O YH Consulting Limited Kantoor 147,
Centurion House, London Road, Staines
upon-Thames, Surrey, TW18 4AX
E-CrossStu GmbH
Mainzer Landstr.69, 60329 Frankfurt am Main.
VEVOR
TOUGH TOOLS, HALF PRICE
garantiecertificaat www.vevor.com/support
VEVOR
TOUGH TOOLS, HALF PRICE
High speed silenced motor
Four protection
BEHÖVER HJÄLP? KONTAKTA OSS!
problem medenna utrustning.
Beskriva
Den oljefria kompressorn ar designad specielt for sjalvbetjaningsanvandare inom olika
Canadian Standards Associations (CSA)
ALLMÄN SÄKERHETSINFORMATION
C/O YH Consulting Limited Office 147,
Centurion House, London Road,
Staines-upon-Thames, Surrey, TW18 4AX
E-CrossStu GmbH
Mainzer Landstr.69, 60329 Frankfurt am Main.
VEVOR
TOUGH TOOLS, HALF PRICE
www.vevor.com/support
