GT545 - Hedge trimmers BLACK & DECKER - Free user manual and instructions

USER MANUAL GT545 BLACK & DECKER

Your Black & Decker hedgetrimmer has been designed for trimming hedges, shrubs and brambles.

This tool is intended for consumer use only.

Safety instructions

Warning! When using mains-powered tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock, personal injury and material damage.
Read all of this manual carefully before operating the tool.
Retain this manual for future reference.
Remove the plug from the socket before carrying out any adjustment, servicing or maintenance.

Keep work area clean

Cluttered areas and benches can cause accidents.

Consider work area environment

Do not expose the tool to rain. Do not use the tool in damp or wet conditions. Keep the work area well lit. Do not use the tool where there is a risk of causing fire or explosion, e.g. in the presence of flammable liquids and gases.

Keep children away

Do not allow children, visitors or animals to come near the work area or to touch the tool or mains cable.

Dress properly

Do not wear loose clothing or jewellery, as these can be caught in moving parts. Preferably wear rubber gloves and non-slip footwear when working outdoors. Wear protective hair covering to keep long hair out of the way.

Personal protection

Always use safety glasses. Use a face or dust mask whenever the operations may produce dust or flying particles.

Hearing protection should be worn.

Guard against electric shock

Prevent body contact with earthed or grounded surfaces (e.g. pipes, radiators, cookers and refrigerators). Electric safety can be further improved by using a high-sensitivity (30mA / 30mS) residual current device (RCD).

Do not overreach

Keep proper footing and balance at all times.

Stay alert

Watch what you are doing. Use common sense. Do not operate the tool when you are tired.

Secure workpiece

Use clamps or a vice to hold the workpiece. It is safer and it frees both hands to operate the tool.

Connect dust extraction equipment

If devices are provided for the connection of dust extraction and collection facilities, ensure that these are connected and properly used.

Remove adjusting keys and wrenches

Always check that adjusting keys and wrenches are removed from the tool before operating the tool.

Extension cables

Before use, inspect the extension cable and replace if damaged. When using the tool outdoors, only use extension cables intended for outdoor use. Up to 30m of Black & Decker extension cable can be used without loss of power.

Use appropriate tool

The intended use is described in this instruction manual. Do not force small tools or attachments to do the job of a heavy-duty tool. The tool will do the job better and safer at the rate for which it was intended. Do not force the tool.

Warning! The use of any accessory or attachment or performance of any operation with this tool other than those recommended in this instruction manual may present a risk of personal injury.

Check for damaged parts

Before use, carefully check the tool and mains cable for damage. Check for misalignment and seizure of moving parts, breakage of parts, damage to guards and switches and any other conditions that may affect its operation. Ensure that the tool will operate properly and perform its intended function. Do not use the tool if any part is damaged or defective. Do not use the tool if the switch does not turn it on and off. Have any damaged or defective parts repaired or replaced by an authorised repair agent. Never attempt any repairs yourself.

Unplug the tool

Unplug the tool when it is not in use, before changing any parts of the tool, accessories or attachments and before servicing.

Avoid unintentional starting

Do not carry the tool with a finger on the on/off switch. Be sure that the tool is switched off when plugging in.

Do not abuse cord

Never carry the tool by its cord or pull it to disconnect from the socket. Keep the cord away from heat, oil and sharp edges.

Store idle tools

When not in use, tools should be stored in a dry, locked up or high place, out of reach of children.

Maintain tools with care

Keep cutting tools sharp and clean for better and safer performance. Follow the instructions for maintenance and changing accessories. Keep handles and switches dry, clean and free from oil and grease.

Repairs

This tool complies with relevant safety requirements.

Repairs should only be carried out by qualified persons using original spare parts; otherwise this may result in considerable danger to the user.

ENGLISH

Electrical safety

This tool is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate.

Additional safety instructions for hedgetrimmers

Wear safety glasses or goggles when operating this tool.

Wear gloves when operating this tool.

Wear ear protection when operating this tool.

Immediately disconnect the cable from the mains if it is damaged or cut.

Do not expose the tool to rain or high humidity.

• Keep the cable away from the blades while using this tool.
  If you have not used a hedgetrimmer before, preferably seek practical instruction by an experienced user in addition to studying this manual.
• Never touch the blades while the tool is running.
• Never attempt to force the blades to come to a standstill.
  Do not put the tool down until the blades have come to a complete standstill.
  Regularly check the blades for damage and wear. Do not use the tool when the blades are worn or damaged.
  Take care to avoid hard objects (e.g. metal wire, railings) when trimming. Should you accidentally hit any such object, immediately switch the tool off, unplug it and check for any damage.
  Should the tool start to vibrate abnormally, immediately switch it off and check for any damage.
• If the tool stalls, immediately switch it off. Unplug the tool before attempting to remove any obstructions.
  After use, place the blade sheath supplied over the blades. Store the tool, making sure that the blade is not exposed.
  Always ensure that all handles and guards are fitted when using the tool. Never attempt to use an incomplete tool or a tool with unauthorised modifications.
• Never allow children to use the tool.
• When operating the extending handle, hold the unit away from your body and loose clothes.
  Be aware of falling debris when cutting the higher sides of a hedge.

Additional safety instructions for Australia and New Zealand

This appliance is not intended for use by young or infirm persons without supervision. Children must be supervised to ensure they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

1. Handle switch
2. Trigger switch
3. Extending handle
4. Front handle release buttons
5. Rear handle release buttons
6. Blade
7. Blade sheath

This hedgetrimmer has the following features for your benefit:

Dual action blades for reduced vibration.
Laser cut and diamond ground blades for improved cutting.
Extending handle for cutting the higher sides of hedges.

Use

Changing the position of the extending handle

Warning! Before changing the position of the extending handle, make sure that the tool is switched off and unplugged.

Rotating the handle into the extended position (fig. A1 & A2)

Your hedgetrimmer will reach you with the handle in the forward position. To move the handle into the extended position, proceed as follows:

Support the underside of the unit with one hand.
Simultaneously press the front handle release buttons (4) with your thumb and middle finger and rotate the handle (3) backward with your other hand.
Move the handle fully into the extended position. Make sure the handle clicks and locks into place.

Rotating the handle into the forward position (fig. B1 & B2) To move the handle from the extended into the forward position, proceed as follows:

Support the underside of the unit with one hand.
Simultaneously press the rear handle release buttons (5) with the thumb and index finger of your other hand and rotate the handle (3) forward. As you move the handle out of the extended position you will hear a click.
Move the handle fully into the forward position.

Make sure the handle clicks and locks into the front handle release buttons (4).

Connecting the tool to the mains

Unless the tool is fitted with a mains cable, you will need to connect an extension cable to the power inlet.

Connect the female socket of a suitable extension cable to the power inlet of the tool.
Insert the mains plug into a mains outlet.

Warning! The extension cable must be suitable for outdoor use. When using a cable reel, always unwind the cable completely.

Switching on and off

Warning! Let the tool work at its own pace. Do not overload.

Carefully guide the cable in order to avoid accidentally cutting it. A good way to control the cable is by putting it over your shoulder.
For your safety, this tool is equipped with a double switching system. This system prevents starting the tool inadvertently and will only allow operation while holding the tool with both hands.

Switching on

Warning! Make sure the handle is fully locked in either the forward or the extended position.

Squeeze the handle switch (1).
Squeeze the trigger switch (2) to start the tool.

Switching off

Release the handle switch (1) or the trigger switch (2).

Warning! Never attempt to lock a switch in the on position.

Hints for optimum use

Start by trimming the top of the hedge. Slightly tilt the tool (up to 15^ relative to the line of cut) so that the blade tips point slightly towards the hedge (fig. C1). This will cause the blades to cut more effectively. Hold the tool at the desired angle and move it steadily along the line of cut. The double-sided blade allows you to cut in either direction.
In order to obtain a very straight cut, stretch a piece of string along the length of the hedge at the desired height. Use the string as a guideline, cutting just above it.
In order to obtain flat sides, cut upwards with the growth. Younger stems move outwards when the blade cuts downwards, causing shallow patches in the hedge.
With the handle in the extended position the tool can be used to cut the high sides of the hedge. Move the tool side to side in a 40^ arc (fig. C2).

Take care to avoid any foreign objects. Especially avoid hard objects such as metal wire and railings, as these could damage the blades.
Regularly oil the blades.

Guidelines for trimming (UK & Ireland)

• Trim hedges and shrubs with seasonal leaves (new leaves every year) in June and October.
  Trim evergreens in April and August.
  Trim conifers and other fast growing shrubs every six weeks from May until October.

Guidelines for trimming (Australia & New Zealand)

Trim hedges and shrubs with seasonal leaves (new leaves every year) in December and March.
Trim evergreens in September and February.
Trim conifers and other fast growing shrubs every six weeks from October until March.

Maintenance

Your tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.

Warning! Before performing any maintenance, switch off and unplug the tool.

After use, carefully clean the blades. After cleaning, apply a film of light machine oil to prevent the blades from rusting.
Regularly clean the ventilation slots in your tool using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent-based cleaner.
Make sure all the handle release buttons and switches are free of debris before and after use.
Always store the tool with the handle locked in the forward position.

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be fitted:

Safely dispose of the old plug.
Connect the brown lead to the live terminal in the new plug.
Connect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth terminal. Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 5 A.

ENGLISH

Troubleshooting

If the tool does not operate correctly, check the following.

Fault Possible cause Action

Tool will not start. Blown fuse. Replace fuse.

Tripped RCD. Check RCD.

Mains lead Check mains

not connected supply.

Handle not locked. Release handle,

then re-position.

Protecting the environment

Separate collection. This product must not be disposed of with normal household waste.

Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection.

Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.

Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.

Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.

You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com

Technical data

	GT524	GT535	GT545
Voltage V	AC	230	230
(Australia&New Zealand) V	AC	240	240
Rated input power W 520 520 520
Blade strokes (no load)	min-1	1,450	1,450
Blade length	cm 43		63
Blade gap	mm 23		23
Blade brake time	s < 1,0		< 1,0 < 1,0
Weight (excl. supply cord) kg 3.0 3.3		3.5

EC declaration of conformity

GT524/GT535/GT545

Black & Decker declares that these products conform to:

98/37/EC, 89/336/EEC, 73/23/EEC, EN 50144, EN 55014,

EN 61000, 2000/14/EC

Hedgetrimmer 520 W, Annex V

LpA (sound pressure): 82 dB(A), LWA (acoustic power) 96 dB(A),

L_WA (guaranteed) 98 dB(A), hand/arm weighted vibration < 2.5 m/s^2

Kevin Hewitt

Director of Consumer Engineering

Spennymoor, County Durham DL16 6JG

United Kingdom

1-7-2006

Guarantee

Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.

If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Black & Decker guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to ensure minimum inconvenience to the customer unless:

The product has been used for trade, professional or hire purposes;
The product has been subjected to misuse or neglect;
The product has sustained damage through foreign objects, substances or accidents;
Repairs have been attempted by persons other than authorised repair agents or Black & Decker service staff.

To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at:

www.2helpU.com

Please visit our website www.blackanddecker.co.uk to register your new Black & Decker product and to be kept up to date on new products and special offers. Further information on the Black & Decker brand and our range of products is available at www.blackanddecker.co.uk

Director of Consumer Engineering

Spennymoor, County Durham DL16 6JG

United Kingdom

1-7-2006

Garantie

Spennymoor, County Durham DL16 6JG

Royaume-Uni

1-7-2006

Garantine

Spennymoor, County Durham DL16 6JG

United Kingdom

1-7-2006

Garanzia

Director of Consumer Engineering

Spennymoor, County Durham DL16 6JG

United Kingdom

1-7-2006

Garantie

No permitted to do so.

Spennymoor, County Durham DL16 6JG

United Kingdom

1-7-2006

Garantía

Tire as chaves de aperto

Spennymoor, County Durham DL16 6JG

United Kingdom

1-7-2006

Garantia

Utom rackhall for barn

EN50144,EN55014,EN61000

2000/14/EC, Hedgetrimmer 520 W, Annex V

LpA (Ijudtryck): 82 dB(A), LwA (Ijudeffekt) 96 dB(A),

Kevin Hewitt
Director of Consumer Engineering

Spennymoor, County Durham DL16 6JG

United Kingdom

1-7-2006

Reservdar / reparationer

Internet, adress: www.2helpU.com

Director of Consumer Engineering Spennymoor, County Durham DL16 6JG, United Kingdom 1-7-2006

Director of Consumer Engineering

Spennymoor, County Durham DL16 6JG

United Kingdom

1-7-2006

Garanti

Director of Consumer Engineering

Spennymoor, County Durham DL16 6JG

United Kingdom

1-7-2006

XpnoiHOnIOeIe To oWTo EpyAeio

H evdeevyevn xnoaonoin an avapeetai oaeutc tic
oyniecs xnoewc. Mn xnoaonoeite epyaia xaunna
ioxuc n npoothkev ia bapiec epyaic. To epyaia 0ac th a
lambdaoupynei enituxotepa kai aophaotepa eav
xnoaonointhei oupwa me tnc npodaypapc tou.
Mn zopicTe to epyaiaio.

Ppoox! Too n xpon eApntmuatwv n npo0nkwv 000 ka n npaypatonoin epyaowv nou dev ouviotwtai otic oyniec autec ykuovci kivduvo tpaupatioou.

EeYxTe eav to epyaieio aocexi 8a8c

Ipv ano th xpon, EeYEtne npoeKTka to epyaleio kai to kaawio troopooiaac yia tuxov znue. EeYTe yia tuxov Kaek uethuyapaimon kai eunlokn twv kivoueewv eepw, yia eepn tou exouv onaeei, yia tuxov znuec otouc npouaktnpec kai touc biakontec, kai yeviKa ahe iouc ouhkecs oIOniec evdexetai va empeacouv n aeitoupyia tou epyaaleiou. Beaiweite oT to epyaleio aeitoupyei kavovikai kai xnpoionoietai ia to oKorno ia tv onio npoopiZetai.Mn xnpoionoite TO epyaleio av Kanoio EEaptnua Tou napouaizEaattwa. Mm xnpoionoite To epyaleio, ev o biakontc dev mnpei va to eoei evtoc n EKTc aeitoupyiac. Povtiote yia TIV enIOKeun h avTKataoTaon tuxov eaattwmuatikow v Eaptnmuatow ano Eouolodotmevo keVtpo ENIKEeuw. Note mnv enIXeipnoeTE va enIOkeuaoTe oIdoi to epyaleio.

Spennymoor, County Durham DL16 6JG

United Kingdom

1-7-2006

Eyyunon

H Black & Decker eiva oiyoun yia tv noiota twv npoiovtwv ncs kai napexei onmavtikn eyyunon. H napouoa ypantneyyunon anotelepiootheo dikaomegaa aac kai dev zmuwei ta ouvtaymuata ocakawpata. H eyyunon loxue EVTOCS ENKpATEiAC TWV Kpatw MEawv ts Eupwnaiknc EvwoqkaiNzWNS EeUeBepwv Suvaalaywv.

επeipntwn nou kanoio npoiov nC Black & Decker napouiaoei βaβn εaattiaac λaattwpatikwv uikwv, nootntac epyaiaac n eaaieuoc oupwviae tnc npodiyapae c evtoc 24 mnuw ano mv nuepounvia ayopac, n Black & Decker eyyuatai mV avtkataotaon twv eaattwpatikwv tmnatwv, mV eniokeun npoiovtwv nou exouv unootei euloyn φθopa loyx xohns nTv avtkataotaon twv npoiovtwv npokéivou va Eaopaioei mv Eaixotm evoxanon otouc πalec nC, ektoc av:

To npoiov exi xpnoouointhe oepyaiako, 8ayyEaiko nepiBaalov n av exe evokiaotei
Exiyivei eopalevn xponTou npoiovtoc n av exi npaueAeI
To npoiov exei unootei 3aabn ano aaaa avtkeieva, ano ouiec n loyw atuxmuato
Exiyivei npoanaeia eiokeunc ano m eoouiootmeva Kevtpa eniokeuw n ano npoownk oou dev avnkei 0to npoosniok ts Black & Decker

Ia va loxuoi n yyyunon, npeneva unoobaale a anobdi en ayopac oTov nwnthn to eouoloohtnevo kevtroeikeuw. Evnpewte iya to nnoieotpo kevto EIOKEUW TNC nepioxnc oac, nikoovwovta c t a ypaedia Tc Black & Decker stn dieuvon nou avaypapetai 0To Exyepio. Enionc, ia va nnpopoponeiye ia ta EIOAUOOTNeVA Kevtpa EIOKEUW Tc Black & Decker, tic aeTOpeIEC kal Touc apofoiouc twv umpeoiw vou napexovtai eTa nV nwnon, mnpoeite va avatpeTe OTo AiaoktuO tn dieuuvon: www.2helpU.com

Papakaoue va eiokeptite Tnv io0eia ma
www.blackanddecker.com yia va kaataxwpnoet to veo ca
poiov Black & Decker kai yia va evnepwveote yia ta vea
poiovta kai tic iokc npoopoc. nepoootepc
nnpopopiec oxetka me t npka Black & Decker kai n oipa
poiovtwuac 8a bptei ot diovuvon

www.blackanddecker.com

BLACK & DECKER.	GT524 - GT534 - GT535 - GT545	TYP 1

Australia Black & Decker (Australia) Pty. Ltd. Tel. [phone]

20 Fletcher Road, Mooroolbark, Victoria, 3138 Fax [phone]

Belgié/Belgique Black & Decker (Belgium) N.V. Tel. 015 - 47 92 11

France Black & Decker (France) S.A.S.

B.P. 21, 69571 Dardilly Cedex

Tel. [phone]

ROFO AG

Fax [phone]

Penrose, Auckland, New Zealand

Middle East & Africa Black & Decker (Overseas) A.G.

PB 5420, Dubai, United Arab Emirates Fax [phone]

Dealer address Date of purchase

Händleradresse Kaufdatum

Is this tool your first purchase? Is it dies?

Is this tool your first purchase? Ist desses Gerat ein Erstkauf? Est-ce un 1er achat?

Is this tool a gift? Ist把这些 Gerat ein Geschenk? S'agit-il d'un caveau? Si tr
di un regalo? Kreeg u de machine alscadeau? Ha recibido usted esta herramienta como regalo? Recebeu esta ferramenta como
presente? Ar verktyget en gava? Er verktoyet en gave? Er verktoget en gave? Onko kone lahja? To epyaiaio ivai dwo?
Yes Ja Oui Si Ja Si Sim Ja Ja Ja KaIa Nau
Is this tool a gift? Ist dasies Gerat ein Geschenk? S'agit-il d'uncadeau? Si tr
di un regalo? Kreeg u de machine alscadeau? Ha recibido usted esta herramienta como regalo? Recebeu esta ferramenta como
presente? Ar verktyget en gava? Er verktoyet en gave? Er verktoget en gave? Onko kone lahja? To epyaiaio ivai dwo?
Yes Ja Oui Si Ja Si
Sim Ja Ja Kylla Nat
Is this tool a gift? Ist dasies Gerat ein Geschenk? S'agit-il d'uncadeau? Si tr
di un regalo? Kreeg u de machine alscadeau? Ha recibido usted esta herramienta como regalo? Recebeu esta ferramenta como
presente? Ar verktyget en gava? Er verktoyet en gave? Er verktoget en gave? Onko kone lahja? To epyaiaio ivai dwo?
Yes Ja Oui Si Ja Si Sim Ja Ja Ja KaIa Nau
Is this tool a gift? Ist把这些 Gerat ein Geschenk? S'agit-il d'un caveau? Si tr
di un regalo? Kreeg u de machine alscadeau? Ha recibido usted esta herramienta como regalo? Recebeu esta ferramenta como
presente? Ar verktyget en gava? Er verktoyet en gave? Er verktoget en gave? Onko kone lahja? To epyaiaio ivai dwo?
Yes Ja Oui Si Ja Si Sim Ja Ja Ja KaIa Nau
Is this tool a gift? Ist dasies Gerat ein Geschenk? S'agit-il d'uncadeau? Si tr
di un regalo? Kreeg u de machine alscadeau? Ha recibido usted esta herramienta como regalo? Recebeu esta ferramenta como
presente? Ar verktyget en gava? Er verktoyet en gave? Er verktoget en gave? Onko kone lahja? To epyaiaio ivai dwo?
YesJa Oui Si Ja Si
Simla la la Kyyla Ngu

No Nein Non Nee No Nee
No No Nao Nej Nei Nej Ei Oxy

No Nein Non No Nee
No Nao Nej Nei Nej
Ei Oxu

SMT Sda Ja Ja Kya Nata

No Nein Non No Nee
No Nao Nei Nei Nei
Fj Oyi
L1

No Nein Non No Nee
No Nao Nei Nei Nei
No □ NoJ NoJ NoJ NoJ
No Nein Non No Nee
No Nao Nei Nei Nei
No □ NoJ NoJ NoJ NoJ

---

No Nein Non No Nee
No Nao Nei Nei Nei
F1 Qy1
SMT Sda Ja Ja Kya Nata

No Nein Non No Nee
SMT Sda Ja Ja Kya Nata

No Nein Non No Nee
SMT Sda Ja Ja Kya Nata
No Nein Non No Nee
No Nao Nei Nei Nei
SMT 5d 5a 5d Kyla Nat
No Nein Non No Nee
SMT Sda Ja Ja Kya Nata

No Nein Non No Nee

GUARANTEE CARD GARANTIEKARTE CARTE DE GARANTIE TAGLIANDO DI GARANZIA GARANTIEKAART TARJETA DE GARANTIA CARTAO DE GARANTIA GARANTIBEVIS GARANTI KORT GARANTI KORT TAKUUKORTTI KAPTA EΓΥHΣHΣ

Portugues Por favor, recorte esta parte, coloque-a num envelope selado e
avor, recorte esta parte, coloque-a num envelope selado e