IAN 311325 - Tent CRIVIT - Free user manual and instructions

USER MANUAL IAN 311325 CRIVIT

Carrying bag Technical data Dimensions: approx. 148 x 112 x 247 cm (W x H x D) Water colume : 2000 mm Dimension for set up: see fig. I Safety advice

PLEASE READ THE ASSEMBLY INSTRUCTIONS

BEFORE USING THE PRODUCT! PLEASE KEEP

THE ASSEMBLY INSTRUCTIONS IN A SAFE PLACE! CAUTION! RISK OF INJURY! Ensure that all parts are undamaged and have been as- sembled appropriately. Risk of injury exists if assembled incorrectly. Damaged parts can af- fect safety and function. CAUTION! Do not leave children unattended. The product is not a climbing frame or toy. Make sure that nobody climbs or leans on the product, particularly children. The product could become imbalanced and tip up. This may result in injury and / or damage. CAUTION! RISK OF INJURY! Never un- der any circumstances assemble the product in a strong wind. Select a piece of land that is as flat and firm as possible to erect your tent. Sandy surfaces reduce the stability of the tent. Please ensure that the surface provides a firm hold for the tent pegs. Never knock the tent pegs into the ground with force! If necessary, the guy lines should only be extended with the help of a loop and the tent peg positioned in a different location. The intactness of all connection points and the guy lines should be checked regularly, as should the firmness of the tent pegs in the ground. If the tent is erected in the wrong order, this may cause damage to the tent. All liability is excluded in such cases.

CAUTION! DANGER OF POISONING

AND DAMAGE TO PROPERTY! Do not light any fires within the product and keep it away from sources of heat. Precautionary measures with respect to fires are stated on a label sewn into the inside of the tent. You are advised not to remove this label. You should also familiarise yourself with the local fire protection regulations (e.g. camping site, tent pitch).10 GB/IE Make sure ventilation openings (includes the outer door) are open all the time to avoid suffocation. Keep the exit free! Do not block the exit with objects. DANGER OF SUFFOCATION! If the inside of the tent is not adequately venti- lated, there is a risk of suffocation. Fire precautions Camp safely. Follow these common sense rules: Do not place hot appliances near the walls, roof or curtains. Always observe the safety instructions for these appliances. Never allow children to play near hot appliances. Keep exits clear. Do not block the exit with objects. Make sure you know the fire precaution arrange- ments on the site. Take note of the effects of the weather and climate When selecting the location to put up your tent, you should always consider the local situation and how this might change. Will the terrain turn into a lake if it rains? Please take into account any rising rivers and incoming tides. Protect the product against strong wind and storms. Place the product in a location that is protected from the wind if possible. If a strong wind is forecast, replace the normal tent pegs with special storm pegs. You can find information about meaningful supplementary products at specialist shops. The tent should be taken down before heavy snowfall or stormy weather. Remove any snow directly from the product. Otherwise the product may collapse under the weight. Ensure that the tent is not too taut when it is erected, otherwise it may not be able to adapt to changing weather conditions and might be damaged. Zips are wearing parts and do not fall under the guarantee conditions. The polyester material of the tent consists of water-repellent material. It is possible that during the first rainfall the tent will not be completely watertight. However, the threads of the tent will contract when exposed to water so that after a short time the tent will become watertight. When exposed to moisture and rain, tent fabrics expand to varying degrees and make it neces- sary to adapt the length of the guy lines. If the material becomes taut again while drying, the guy lines have to be loosened again in good time. Do not use any insect spray in or on the tent. Small leaks on the seams can be repaired with a seam spray and impregnation spray can be used for the tent skin. Assembly Please ensure that the product is only assembled / disassembled by a competent person. Erecting the tent ATTENTION: Please note that the poles are under tension and snap into the natural shape of the tent. Taking care that the release of tension does not cause any injury. Remove the rubber band and throw the product away from you into the air. Set up the tent with guy lines

(see fig. H). Folding the tent Please see a video using our QR code that demonstrates how to fold away and packing the tent. Grab all the loops together in one of your hands. Start at the rear end in order to allow11 GB/IE the air escape completely through the front entrance (see fig. A–B). Keep the four loops gathered in one hand and put the tent into an upwards position (see fig. C). Press the tip of the upper loop towards the ground and move it towards the middle. Keep pressing downwards the new loops with one hand while the other hand keeps holding the other four loops together (see fig. D–E). Loose the grip of the hand that holds the 4 loops and fold all loops into each other (see fig. F). Align the loops and secure the folded tent with the elastic strap (see fig. G). You can now store the tent in its bag. Cleaning and care CAUTION! Never wash the tent in a washing machine. Otherwise the product may lose some of its ability to keep out water. CAUTION! Never use petrol, solvent or other cleaning agents. Otherwise there is a danger of damage to the product. Condensation can form in all synthetic tents; you should therefore air the tent as frequently as possi- ble in order to counteract this. For cleaning the tent and removing any stains you should only use a cleaning agent that is specifically intended for cleaning polyester tents. Remove any dirt from the tent

with a soft sponge and clean water. Please allow all parts to dry thoroughly before you repack the tent

This will prevent the for- mation of mould, bad odours and discolouration.

the zipper sticks when being opened or clo sed, spray it with silicone spray. Disposal The packaging is made entirely of recyclable mate- rials, which you may dispose of at local recycling facilities. Contact your local refuse disposal authority for more details of how to dispose of your worn-out product. Warranty The product has been manufactured to strict quality guidelines and meticulously examined before deli- very. In the event of product defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below. The warranty for this product is 3 years from the date of purchase. Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe lo- cation. This document is required as your proof of purchase. This warranty becomes void if the product has been damaged, or used or maintained impro- perly. The warranty applies to defects in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly conside- red consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.12 FR/BE Tente pop-up Introduction Nous vous félicitons pour l‘achat de votre nouveau produit. Vous avez opté pour un produit de grande qualité. Avant la première mise en service, vous devez vous familiariser avec toutes les fonctions du produit. Veuillez lire attentivement le mode d’emploi ci-dessous et les consignes de sécurité. N’utilisez le produit que pour l’usage décrit et les domaines d’ap- plication cités. Conserver ces instructions dans un lieu