EasyManual 
SPBC 10 A1 - Battery charger SILVERCREST - Free user manual and instructions
Find the device manual for free SPBC 10 A1 SILVERCREST in PDF.
User questions about SPBC 10 A1 SILVERCREST
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Battery charger in PDF format for free! Find your manual SPBC 10 A1 - SILVERCREST and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SPBC 10 A1 by SILVERCREST.
USER MANUAL SPBC 10 A1 SILVERCREST
natural_image
Exterior view of a modern gray power bank with USB ports and a website URL (no text on main body)POWERBANK - 10.000 mAh / 10,000 mAh POWER BANK / BATTERIE EXTERNE POWERBANK - 10 000 mAh SPBC 10 A1
DE AT CH
POWERBANK - 10.000 mAh
Bedienungsanleitung
GB IE
10,000 mAh POWER BANK
Operating instructions
FR BE
BATTERIE EXTERNE POWERBANK - 10 000 mAh
Mode d'emploi
NL BE
POWERBANK - 10.000 mAh
Gebruiksaanwijzing
PL
POWERBANK - 10.000 mAh
Instrukcja obstugi
CZ
POWERBANKA - 10.000 mAh
Návod k obsluze
SK
POWERBANKA - 10.000 mAh
Návod na obsluhu
text_image
iDE AT CH
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.
FR BE
GB/IE Operating instructions Page 17
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE-44867 BOCHUM
DEUTSCHLAND
www.kompernass.com
Contents
Introduction.... 18
Information about these operating instructions....18
Copyright 18
Notes on trademarks 18
Intended use....18
Warnings and symbols used 19
Safety 20
Basic safety instructions 20
Description of components 22
Setting up 22
Check package contents 22
Disposal of the packaging 23
Charging the power bank 23
Checking the charge level 24
Handling and use 25
Charging mobile devices with the power bank ..... 25
Troubleshooting 26
Cleaning....26
Storage when not in use 27
Disposal.... 27
Disposal of the device 27
Appendix....28
Technical data 28
Notes on the EU Declaration of Conformity. 28
Kompernass Handels GmbH warranty 28
Service 30
Importer 30
Introduction
Information about these operating instructions
Congratulations on the purchase of your new device. You have selected a high-quality product. The operating instructions are part of this product. They contain important information on safety, usage and disposal. Before using the product, please familiarise yourself with all operating and safety instructions. Use the product only as described and for the range of applications specified. Retain these operating instructions for future reference. Please also pass on these operating instructions to any future owner.
Copyright
This documentation is protected by copyright. Any copying or reproduction, including in the form of extracts, or any reproduction of images (even in a modified state), is permitted only with the written authorisation of the manufacturer.
Notes on trademarks
USB ^® is a registered trademark of USB Implementers Forum, Inc.
All other names and products may be trademarks or registered trademarks of their respective owner.
Intended use
This device is an information technology device and is intended exclusively for charging mobile devices which are charged via a USB port as standard. The device is not intended for any other purpose, nor for use beyond the scope described. The device is not intended for use in commercial or industrial environments. The manufacturer accepts no responsibility for damage caused by failure to observe these instructions, improper use or repairs, unauthorised modifications or the use of unapproved replacement parts. The risk is borne solely by the user.
Warnings and symbols used
The following warnings are used in these operating instructions:
DANGER
A warning notice at this hazard level indicates an imminently hazardous situation.
Failure to avoid this hazardous situation could result in serious injuries or even death.
▶ Follow the instructions in this warning notice to avoid the risk of serious injuries or death.
WARNING
A warning at this hazard level indicates a potentially hazardous situation.
Failure to avoid this hazardous situation could result in injury.
▶ Follow the instructions in this warning label to prevent injury.
CAUTION
A warning at this hazard level indicates a risk of property damage.
Failure to avoid this situation could result in property damage.
▶ Follow the instructions in this warning label to prevent property damage.
NOTE
▶ A note provides additional information that makes handling the device easier for you.
This symbol can be found on the housing of the power bank and indicates that the contents of the operating instructions should be followed.
This symbol can be found on the housing and indicates that the device uses Smart Fast Charge technology.
Safety
This section contains important safety instructions for handling the device. This device complies with statutory safety regulations. Improper use may result in personal injury and property damage.
Basic safety instructions
This device may be used by children aged 8 years and above and by persons with limited physical, sensory or mental capabilities, or lack of experience and knowledge, provided that they are under supervision or have been told how to use the device safely and are aware of the potential risks. Do not allow children to play with the device. Cleaning and user maintenance tasks may not be carried out by children unless they are supervised.
ADANGER! Do not allow children to play with the packaging material! Keep all packaging materials away from children. There is a risk of suffocation!
- Check the appliance for visible external damage before use. Do not operate a device which has been damaged or dropped.
■ Always place the device on a stable and level surface. It can be damaged if dropped.
Do not expose the device to direct sunlight or high temperatures. Do not cover the device during charging. Otherwise it may overheat and be irreparably damaged.
- Do not place the product near heat sources such as radiators or other heat-generating appliances.
- Keep the device away from open flames (e.g. candles) at all times.
It is not suitable for use in rooms with high temperature or humidity (e.g. bathrooms) or excessive quantities of dust.
■ Never expose the device to extreme heat. This particularly applies to storage in a car. Extreme temperatures can occur in car interiors and glove compartments during long periods of immobilisation. Remove electrical and electronic devices from the vehicle.
- Do not use the device immediately after moving it from a cold room to a warm room. Always allow the device to acclimatise before turning it on.
■ Never open the device housing. None of the components in the device can be serviced or replaced by the user.
- Do not make any unauthorised modifications or alterations to the device.
All repairs must be carried out by authorised specialist companies or by the customer service department. Improper repairs may put the user at risk. They will also invalidate any warranty claims.
- Do not expose the device to water spray or dripping water, and do not place liquid-filled objects such as vases or open drink containers on or near the device.
WARNING! Switch the device off immediately and disconnect any connected charging cables from the device if you smell fumes or notice any smoke. Have the device checked by a qualified specialist before using it again.
If you are using a USB power supply, the socket you use must always be easily accessible so that the USB power supply can be quickly disconnected from the socket in a hazardous situation. You should also observe the operating instructions for the USB power supply.
WARNING! Improper use of batteries can cause fires, explosions, leakages or other hazards! Do not throw the device into a fire, as the integrated battery may explode.
Note any restrictions or prohibitions on use for battery-powered appliances in locations with specific hazard risks, such as petrol stations, aeroplanes, hospitals, etc.
Description of components
(See fold-out page for illustrations)
① Power bank SPBC 10 A1
② ON/OFF button
③ Charge level LEDs
④ Micro USB charging port (input)
⑤ USB-A port (output)
6 USB-C port (in-/output)
⑦ Charging cable (USB-A to micro USB)
⑧ Operating instructions (symbol)
Setting up
Check package contents
(See fold-out page for illustrations)
The following components are included in delivery:
• Power bank SPBC 10 A1
- Charging cable
• These operating instructions
◆ Remove all parts of the device from the packaging and remove all packaging materials.
NOTE
▶ Check the package for completeness and signs of visible damage.
If the delivery is incomplete or damage has occurred as a result of defective packaging or during transport, contact the Service hotline (see section Service).
Disposal of the packaging
The packaging materials have been selected for their environmental friendliness and ease of disposal, and are therefore recyclable. Dispose of packaging materials that are no longer needed in accordance with applicable local regulations.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material components for disposal if necessary. The packaging material is labelled with abbreviations (a) and numbers (b) with the following meanings:
1-7: plastics, 20-22: paper and cardboard,
80-98: composites.
Charging the power bank
Before using the power bank, the integrated battery must be fully charged.
CAUTION
▶ Charge the device only in dry interior rooms.
The power bank must never be charged and used for charging an external device at the same time.
▶ Due to the high power consumption, the power bank must be charged using a USB mains adapter. Do not charge the power bank via the USB port of a PC or notebook.
▶ Use only a USB mains adapter with an output voltage of 5 V and an output current of at least 3 A to charge the power bank.
▶ Always disconnect the charging cable ⑦ when charging is complete!
Connect the USB-A plug of the charging cable ⑦ to a suitable USB power supply (not supplied).
Connect the micro USB plug of the charging cable ⑦ to the micro USB charging port ④ on the power bank.
NOTE
The power bank can also be charged via the USB-C port ⑥. To do this, you will need a separate USB-C cable and a suitable USB power supply (not supplied).
The charge level LEDs ③ provide a rough estimate of the charge level during charging:
| LED display Charge level | |
| One LED is flashing < 25% | |
| One LED is on, the second LED is flashing 25 - 49% | |
| Two LEDs are on, the third LED is flashing 50 - 74% | |
| Three LEDs are on, the fourth LED is flashing 75 - 97% | |
| All LEDs are on 98 - 100% |
Checking the charge level
You can also check the charge level of the power bank when it is not charged or while it is being used for charging.
Briefly press the ON/OFF button ② once. The LEDs ③ show the current charge level of the power bank for about 30 seconds.
| LED display Charge level | |
| All LEDs are on 76 - 100% | |
| Three LEDs are on 51 - 75% | |
| Two LEDs are on 26 - 50% | |
| One LED is on 10 - 25% | |
| One LED lights up orange < 10% | |
| All LEDs off | 0% |
Handling and use
Charging mobile devices with the power bank
CAUTION
▶ You can charge two devices at a time using the power bank. If both outputs (USB-A ⑤ and USB-C ⑥) are used simultaneously, the total current consumption of the connected mobile devices must not exceed 3 A.
◆ Plug the micro USB plug of the charging cable ⑦ into the micro USB charging port of the mobile device to be charged and the USB-A plug into the USB-A port ⑤ of the power bank. Devices with a USB-C connection cable can be connected to the USB-C port ⑥.
◆ Press the ON/OFF button ② once briefly to start the charging process.
NOTE
▶ Alternatively, you can also use the original charging cable (USB cable) provided by the respective device manufacturer.
The integrated Smart Fast Charge technology enables reduced charging times for compatible devices. Compatible connected devices automatically receive a signal to draw the maximum available charging current.
During the charging process, the charge level LEDs ③ show the current charge level of the power bank (see table in the section Checking the charge level).
To stop charging, disconnect the charging cable from the mobile device and the power bank. The charging status LEDs ③ go out after about 30 seconds.
- Optionally, you can press the ON/OFF button ② twice in quick succession to turn off the power bank and the battery level LEDs ③.
Troubleshooting
The power bank does not charge.
◆ The connection may be faulty. Check the connection.
A connected device does not charge.
◆ The integrated battery is empty. Charge the battery.
◆ No connection to the device. Check the connection.
◆ Press the ON/OFF button ② once briefly to start the charging process.
◆ The charging current of the connected device is too low or too high.
The internal overcurrent protection may have been triggered. Disconnect the connected device and briefly connect the micro USB charging port ④ to a power source (see section Charging the power bank). Afterwards, the power bank can be used again.
NOTE
▶ If you cannot solve the problem with the above-mentioned solutions, please contact the Service Hotline (see section Service).
Cleaning
CAUTION
Possible damage to the device.
There are no serviceable parts or parts requiring cleaning inside the power bank. Moisture can cause damage to the device.
▶ To avoid irreparable damage to the device, ensure that no moisture gets into the device during cleaning.
▶ Do not use caustic, abrasive or solvent-based cleaning materials. These can damage the surfaces of the device.
- Clean the housing of the device with a lightly moistened cloth and a mild detergent only.
Storage when not in use
◆ Store the device in a location which is clean, dry, dust-free and not in direct sunlight.
- For long-term storage, the integrated battery should be fully charged to extend its operating life.
Disposal
Disposal of the device
The symbol shown on the left of a crossed-out wheelie bin means that this device is subject to Directive 2012/19/EU. This directive states that this device may not be disposed of in normal household waste at the end of its useful life, but must be taken to a specially set-up collection point, recycling depot or disposal company. The integrated rechargeable battery in this device cannot be removed for disposal.
This disposal is free of charge for the user. Protect the environment by disposing of this device properly.
Your local community or municipal authorities can provide information on how to dispose of the worn-out product.
Appendix Technical data
| Integrated battery(lithium polymer) | 3.7 V / 10000 mAh / 37 Wh |
| Micro USB input voltage/current | 5 V = (direct current) / 2.1 A |
| USB-C Input voltage/current 5 V | (direct current) / 3 A |
| USB-C Output voltage, current 5 V | (= (direct current) / 3 A |
| USB-A Output voltage, current | 5 V = (direct current) / 2.1 A |
| Minimum output current approx. | 30 mA |
| Maximum output current 3 A* | |
| Operating temperature 5°C - 35°C | |
| Storage temperature 0°C - 40°C | |
| Relative humidity(no condensation) | ≤ 75% |
| Dimensions (L x W x H) approx. | 14 x 7 x 1.6 cm |
| Weight approx. 220 g |
* When both outputs are being used at the same time, the total power consumption of the connected mobile devices must not exceed 3 A.
Notes on the EU Declaration of Conformity
CE This device complies with the basic requirements and other relevant provisions of the Electromagnetic Compatibility Directive 2014/30/EU and the RoHS
Directive 2011/65/EU.
The complete EU Declaration of Conformity is available from the importer.
This appliance has a 3-year warranty valid from the date of purchase. If this product has any faults, you, the buyer, have certain statutory rights. Your statutory rights are not restricted in any way by the warranty described below.
Warranty conditions
The validity period of the warranty starts from the date of purchase. Please keep your original receipt in a safe place. This document will be required as proof of purchase.
If any material or production fault occurs within three years of the date of purchase of the product, we will either repair or replace the product for you at our discretion. This warranty service is dependent on you presenting the defective appliance and the proof of purchase (receipt) and a short written description of the fault and its time of occurrence.
If the defect is covered by the warranty, your product will either be repaired or replaced by us. The repair or replacement of a product does not signify the beginning of a new warranty period.
Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under the warranty. This also applies to replaced and repaired components. Any damage and defects present at the time of purchase must be reported immediately after unpacking. Repairs carried out after expiry of the warranty period shall be subject to a fee.
Scope of the warranty
This appliance has been manufactured in accordance with strict quality guidelines and inspected meticulously prior to delivery.
The warranty covers material faults or production faults. The warranty does not extend to product parts subject to normal wear and tear or fragile parts such as switches, batteries, baking moulds or parts made of glass.
The warranty does not apply if the product has been damaged, improperly used or improperly maintained. The directions in the operating instructions for the product regarding proper use of the product are to be strictly followed. Uses and actions that are discouraged in the operating instructions or which are warned against must be avoided.
This product is intended solely for private use and not for commercial purposes. The warranty shall be deemed void in cases of misuse or improper handling, use of force and modifications / repairs which have not been carried out by one of our authorised Service centres.
Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions:
■ Please have the till receipt and the item number (e.g. IAN 12345) available as proof of purchase.
■ You will find the item number on the type plate, an engraving on the front page of the instructions (bottom left), or as a sticker on the rear or bottom of the appliance.
If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.
■ You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.
You can download these instructions along with many other manuals, product videos and software on www.lidl-service.com.
Service
GB
Service Great Britain
Tel.: 0800 404 7657
E-Mail: kompernass@lidl.co.uk
IE
Service Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: kompernass@lidl.ie
IAN 313621
Importer
Please note that the following address is not the service address.
Please use the service address provided in the operating instructions.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE-44867 BOCHUM
GERMANY
www.kompernass.com
Table des matières
Introduction....32
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE-44867 BOCHUM
ALLEMAGNE
www.kompernass.com
Inhoud
Inleiding....48
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE-44867 BOCHUM
DUITSLAND
www.kompernass.com
Spis treści
Wstep....62
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21 • DE-44867 BOCHUM
NIEMCY
www.kompernass.com
Obsah
Úvod 76
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE-44867 BOCHUM
NĚMECKO
www.kompernass.com
Obsah
Úvod 90
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE-44867 BOCHUM
NEMECKO
www.kompernass.com
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE-44867 BOCHUM
GERMANY
www.kompernass.com
Stand der Informationen · Last Information Update · Version des informations
Stand van de informatie · Stan informacji · Stav informacií · Stav informácií:
