OHA 105R - Curling iron OK - Free user manual and instructions

Technical Features	OK OHA 105R curling iron with rapid heating technology, ceramic coating, 25 mm barrel diameter.
Adjustable Temperature	Temperature control with multiple levels to suit different hair types.
Usage	Designed to create curls and waves, suitable for all hair types.
Heating Time	Fast heating in less than 30 seconds for time-saving during use.
Maintenance	Regular cleaning of the ceramic surface with a soft cloth, avoid using abrasive products.
Safety	Automatic shut-off after 60 minutes of inactivity, overheat protection.
General Information	Lightweight for easy handling, swivel cord to prevent tangling.

Frequently Asked Questions - OHA 105R OK

The curling iron does not heat up.

Check that the device is properly plugged in and that the outlet is working. Also ensure that the power button is activated.

My curls do not hold.

Try using a setting spray after curling your hair. Also, make sure your hair is completely dry before curling.

The curling iron damages my hair.

Use a heat protectant before using the curling iron. Set the temperature to an appropriate level for your hair type.

How do I adjust the temperature of the curling iron?

The OK OHA 105R curling iron has a temperature adjustment knob. Turn the knob to select the desired temperature based on your hair type.

The curling iron's cord is too short.

Use an extension cord if needed for more flexibility. Avoid areas where the cord could be pulled or bent.

How do I clean the curling iron?

Unplug the iron and let it cool. Use a soft, damp cloth to clean the surface. Avoid abrasive products.

The curling iron makes strange noises.

If you hear unusual noises, unplug the device immediately and contact customer service. Do not use it until a technician has checked it.

Can I use the curling iron on wet hair?

It is recommended to use the curling iron only on dry hair to avoid damaging your hair.

Does the curling iron have an automatic shut-off feature?

Yes, the OK OHA 105R curling iron is equipped with an automatic shut-off feature that activates after a certain period of inactivity for safety reasons.

USER MANUAL OHA 105R OK

Technical diagram of a hairdryer with labeled parts including comb, brush, and power tool

HERZLICHEN GLÜCKWUNSCH!

Thanks for your purchase of an ok. product. Please read this manual carefully and keep it for future reference.

IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.

Warning! Do not use this product near bathtubs, showers, basins or other vessels containing water.

1. This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved.
2. Children shall not play with the product.
3. Cleaning and user maintenance shall not be made by children unless they are supervised.
4. When the product is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the product is switched off.
5. For added protection, we recommend that a residual current device (RCD) with a maximum rated residual current of 30 mA be installed. This may only be installed by an expert.
6. A damaged power cord may only be replaced by the authorised service agent in order to avoid hazards.
7. Follow the instructions in the chapter Cleaning and care.

Read this user manual thoroughly before first use and pass it on with the product. Pay attention to the warnings on the product and in this user manual. It contains important information for your safety as well as for the use and maintenance of the equipment.

1. Use the product only for its intended purpose and with recommended accessories and components. Improper use or wrong operation may lead to hazards.
2. Never leave the product unsupervised while it is switched on.
3. Do not place heavy objects on top of the product.
4. Never immerse electrical parts of the product in water during cleaning or operation. Never hold the product under running water.
5. Do not under any circumstances attempt (e.g. damage in power cord, product is dropped, etc.) to repair the product yourself. For servicing and repairs, please consult an authorised service agent.
6. The mains voltage must match the information on the rating label of the product.
7. Only unplug from the power socket can separate the product completely from the mains. Please be sure that the power plug is in operable condition.
8. Avoid damages to the power cord that may be caused by kinks or contact with sharp corners.
9. Keep this product including power cord and power plug away from all heat sources like for example, ovens, hot plates and other heat-producing products/objects.
10. Only unplug from the power socket by the plug itself. Do not pull on the cord.

EN

8

1. Unplug the product ...

2. when the product is not being used,

3. in case of malfunctions,
4. before attaching / detaching accessories and

5. before cleaning the product.

6. Check the power cord and housing on damages. Should any damages found, do not use hairdryer anymore, and have the hairdryer repaired by a qualified electrician before using it again.

7. Do not bend or crush the power cord; always position it so that no-one can step or trip on it.

8. Do not wrap the power cord around the hairdryer and protect it from damage.
9. Do not use an extension cord.
10. Never touch the hairdryer, power cord or plug with wet hands.
11. Disconnect your hairdryer from the power supply immediately after use. The appliance is only completely switched off when it has been unplugged.
12. Use this product in dry indoor areas only and never outdoors.
13. Place the product on a flat, sturdy and slipresistant surface.
14. Never use, expose or put the product near to:

- direct sunlight and dust;

- fire (fireplace, grill, candles), water (water splashes, vases, ponds, bath tube) or heavy moisture.

1. This product is not intended for commercial use. It is designed for household use only.
2. Should the product fall into water, then unplug the power cable from the mains outlet. Do not reach into the water before the product has been disconnected from the mains supply. Get the product checked by an expert at this stage.
3. If you are using the product with your hand(s), then always make sure it is turned off for safety reasons.
4. The air outlet grill may become very hot during use. Make sure that the power cable does not come into contact with the air outlet grill.
5. The air inlet screen can be come hot during operation. Make sure that the power cable does not come into contact with the air inlet screen.
6. Never open the housing. Do not place any objects inside the air inlets and outlets.
7. Make sure that any objects such as hairpins or hair clips do not get inside the product. This may cause a short circuit or damage to the product.
8. Allow the product to cool down completely before you remove or install any accessories.
9. Do not use sprays or water sprays in close proximity of the product.
10. Never cover the air inlet and outlet openings during use. Make sure that any hair does not come into contact inside the air inlet and outlet openings.
11. Should the air inlet and outlet openings be covered during operation, then the built-in thermal protection will automatically switch the product off. Pull the plug and allow the product to cool down completely before setting it back in motion. Check to see whether the air inlet screen has become dirty, and remove any debris such as hair or fluff.
12. Risk of burning! Parts of the product may become very hot during operation. Hold the product therefore only with the handle.
13. Clean the product and all other accessories after each use.

INTENDED USE

This product is suitable for styling hair only. Any other use may result in damage to product or injuries. The Imtron GmbH assumes no liability for damage to the product, for property damage or for personal injury due to careless or improper usage of the product, or usage of product which does not meet the manufacturer's specified purpose.

DELIVERY CONTENT

1 x Hot air brush
1 x Round brush attachment
1 x Brush attachment
1 x User manual

COMPONENTS

The product may be available in different colors.

A. Round brush attachment
B. Brush attachment
C. Release button
D. Air flow switch
E. Air inlet grille
F. Hanging loop
G. Power cord with plug

BEFORE FIRST TIME USE

• Remove the product and accessories carefully from the original packaging.
• Inspect the delivery contents for completeness and damages.
• Should the delivery contents be incomplete or damaged, contact your sales outlet immediately.

ATTACHING AND REMOVING ACCESSORIES

1 You can use the product with brush or round brush attachment.
2 Position the brush/round brush's arrow above the shaft's arrow. Attach the brush/round brush by pressing until it clicks into place. The arrows must be aligned.
3 To change brush attachment, press and hold the release button. The attachment can be removed easily.
Note: Unplug and let the product cool down before changing/removing attachments.

OPERATION

4 Connect the power plug to a suitable power outlet.

5 Use the air flow switch (0 1 2) to select a desired level.

Setting Function
0 Off
1 Gentle	air flow
2 Strong	air flow

Caution: The product switches off automatically if it is overheated. Disconnect the product from the power source and let it cool down completely.

6 Switch off the product after use.

7 Unplug the power plug from the power outlet.

EN

CLEANING AND CARE

• Warning! Never immerse electrical parts of the product in water during cleaning or operation. Never hold the product under running water.
• Warning! When cleaning, never use solvents or abrasive materials, hard brushes, metallic or sharp objects. Solvents are harmful to human health and can attack plastic parts, while abrasive cleaning mechanisms and tools may scratch the surface(s).

8 Clean the product's exterior surfaces with a slightly damp cloth and then dry them thoroughly. Make sure that no water enters the product interior (for example, through the switch). Keep the product in a dry, cool location which is protected against moisture and direct sunlight. Keep this product out of the reach of children.

TROUBLESHOOTING

If there are any problems during operation, please refer to the following table. If problems cannot be solved as indicated under Solution, please contact your manufacturer.

Problem Possible	causes Solution
Product does not work	Interrupted power supplyOverheat protection activatedAir inlet opening is dirty	Check the power supplyLet the product cool down and switch it on againClean the air inlet opening

TECHNICAL DATA

Voltage: 220 - 240 V\~ 50 Hz

Power: 600 W

Protection class : II

DISPOSAL

Do not dispose of this product as unsorted municipal waste. Return it to a designated collection point for the recycling of WEEE. By doing so, you will help to conserve resources and protect the environment. Contact your retailer or local authorities for more information.

¡ENHORABUENA!

We provide a warranty for this device in according to the following conditions:

1. In accordance with the conditions below (points 2-7) we will remove defects of the device free of charge, it they are evidently due to material and/or production errors, and if they are reported to us immediately after detection and within 24 months of delivery to the first end user.
2. The warranty does not cover easily breakable parts such as glass, plastic or light bulbs. A warranty obligation is not triggered by minor deviations from the target conditions, which are not significant to the value and usability of the device, by damages due to chemical and electro-chemical effects of water, in general by abnormal environmental conditions or improper operating conditions, or if the device otherwise comes into contact with unsuitable substances. A warranty can also not be assumed if the defects on the device are due to transport damage which is not caused by us, improper installation and assembly, incorrect operation, non-household usage, a lack of maintenance or the non-observance of the operating or assembly instructions. Warranty claims are void if repairs or interventions are carried out by people who are not authorised by us to do so, or if our devices have been equipped with spare parts, supplements or accessories, which are not original parts and therefore cause a defect.
3. The warranty service is performed by either repairing the defect parts or replacing them with non-defect parts, at our discretion. Devices which can be transported (e.g. in a car) and on which a warranty service is claimed within the scope of this warranty, are to be handed over or sent to our closest customer service office or our contracted customer service office. Repairs at the place of installation can only be requested for devices which are operated on site (stationary devices). The respective sales receipt stating the purchase and/or delivery date is to be submitted. Replaced parts become our property.
4. If the rectification of the defect device is rejected by us or fails, we will provide a replacement of equal value and at no charge within the above-mentioned warranty period, at the request of the end user.
5. Warranty services neither invoke an extension of the warranty period, nor start a new warranty period. The warranty period for built-in replacement parts ends with the warranty period for the whole device.
6. Smart Devices: If your device is able to connect to the internet (so called smart device) security updates are not part of the scope of this warranty. For a certain period of time security updates for your smart device will be done automatically. If this period ends you will be informed by a general note. Afterwards security updates can be performed manually.
7. This warranty extends to every country where this device is supplied by an authorised distributor.

8. Any other or further claims, in particular those regarding compensation for damage caused outside of the device are ruled out -provided liability is not obligatory by law.

9. We are furthermore liable without restrictions in accordance to legal requirements for damage covered by the liability scope of the Product Liability Act, as well as for damage caused by intentional and gross negligent contract violations plus fraudulent intent by us, our legal representatives or vicarious agents.

10. This warranty bond does not affect your legal warranty claims.

Español

Garantía

CUSTOMER SERVICE HOTLINES:

België / Belgique - Ligne d'assistance client: 022008804 (lokaal tarief)