RM 410 - Hand blender ECG - Free user manual and instructions
Find the device manual for free RM 410 ECG in PDF.
User questions about RM 410 ECG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Hand blender in PDF format for free! Find your manual RM 410 - ECG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RM 410 by ECG.
USER MANUAL RM 410 ECG
A. Lower speed button
B. Removable blender attachment
C. Turbo button (higher speed)
D. Appliance body
E. Attachment release button
HR/BIH
A. Tipka za nizu brzinu
B. Odvojivi nastavak za miksanje
C. Tipka Turbo (veça brzina)
D. Tijelo uredaja
E. Osigurač za oslobodanje nastavaka
SI
Please read carefully and keep for future reference.
Warning: The safety measures and instructions contained in this manual do not include all potential conditions and scenarios. The user must understand that common sense, caution and care are factors that cannot be integrated into a product. Therefore, the user is responsible for these factors when using and operating this appliance. We are not liable for any damages caused during shipping, by incorrect use, voltage fluctuation or the modification or adjustment of any part of the appliance.
GB To protect against the risk of fire or electric shock, basic precautions must be taken while using electrical appliances, including the following:
- Make sure the voltage in your outlet corresponds to the voltage provided on the appliance label and that the socket is correctly grounded. The outlet must be installed in accordance with applicable electrical codes according to EN.
- Never use the appliance if the power cord is damaged or if the appliance is broken, if you have dropped or otherwise damaged the appliance. All repairs, including cord replacements, must be carried out at a professional service centre! Do not remove the protective covers from the appliance; there is a risk of electric shock!
- Protect the appliance against direct contact with water and other liquids, to prevent potential electric shock.
- Do not use the appliance outdoors and in wet environment and do not touch the power cable or the appliance with wet hands. Risk of electric shock.
- Pay closer attention when using the appliance near children.
- The appliance should not be left unattended when in operation.
-
When working with cutting blades, especially when removing them from the container, when emptying the container, and during cleaning, be careful, because the blades are very sharp and can cause injury.
-
Do not use the device for any other purpose than the stated one. Use for processing food only. Do not use it to stir hot foods and liquids! Always add liquid to the blended ingredients.
- Do not leave the appliance with the power cable plugged in unattended. Prior to maintenance, installation, assembly and disassembly of parts or cleaning, unplug the power cord from the power outlet. Do not remove the power cord from the outlet by yanking the cord. Unplug the power cord from the outlet by grasping the plug.
- Do not use the appliance close to a source of heat, e. g. oven. Protect it against direct sunlight.
- Never cover the appliance during operation and do not use it close to flammable materials, e. g. curtains, etc.
- Do not insert large pieces of food into the appliance. Never put in materials like paper, metal, cardboard, plastics, etc.
- Before starting the device, set the bowl in its proper position, attach the blade to the motor and then plug the cord into the outlet. This reduces the risk of injury.
- Do not touch the moving parts.
- Hair, fingers or parts of clothing shall be kept far enough from the moving parts of the appliance. Do not place any tools or hands into the bowl while blending, risk of injury or damaging the appliance. Spatula may be used only when the appliance is off.
- Always use the appliance on an even and stable surface.
- Do not allow the power cord to touch hot surfaces or run the cord over sharp edges.
- Use accessories only advised by the manufacturer, otherwise you risk losing the warranty.
- Prior to replacing accessories and accessible parts, or before approaching the moving parts during operation, switch off the device and disconnect it from the power supply.
- Always unplug from outlet immediately after use.
- Use this appliance only in accordance with the instructions in this manual. Incorrect use may result in injury. This appliance is designed
for domestic use only. The manufacturer is not liable for any damage caused by the improper use of this appliance.
- This appliance should not be used by children. Keep the appliance and its power supply out of reach of children. The appliance can be used by the physically and mentally impaired or by individuals with insufficient experience and knowledge, if supervised or trained to use the appliance in a safe manner and understand potential dangers. Children must not play with the appliance.
Do not immerse the body of the appliance in water! Do not press switch by hand!
GB INSTRUCTIONS FOR USE - BLENDER

The immersion blender is intended for preparing gravies, icings, soups, mayonnaises, children's dishes, cocktails and milkshakes.
Before using the blender for the first time, fill the bowl half way with water, immerse the blade of the blender to the bottom of the bowl and blend for several seconds. Rinse the entire attachment and bowl well afterwards.
- Insert the ingredients into the mixing bowl or another higher kitchen container. Do not use the blender to crush ice, cut nuts or other hard food.
- Place the removable attachment on the motor until it "falls" into place.
- Uncoil the entire cord and plug into the outlet.
- Insert the appliance into the mixing bowl containing food and press the desired speed button on the upper part of the appliance body. Blend in circular motions from the bottom.
- Release the button to stop the blender. Unplug the power cord from the outlet after you are finished blending.
Note: Maximum continuous operation of the appliance is 30 seconds when processing soft foods and liquids. Before further use of the appliance, let it rest for at least 3 minutes.
CLEANING
Disconnect the appliance from the electrical output prior to performing any maintenance. Cleaning shall always be performed on a cooled appliance! Do not use steel wool, abrasive agents or solvents.
- Wipe the appliance body with a damp cloth. Never clean it under running water, do not rinse or immerse the iron into water! Attach the attachment back on to the appliance body.
- Wash the blade in warm soap water. We do not recommend washing the dishes in a dishwasher.
Always make sure the immersion blender is completely cooled, clean and dry before putting it away.
Quick rinsing
Between individual blending tasks, hold the immersion blender in a glass, half filled with water and leave the blender running for a few seconds.
Attention
The plastic parts of the appliance may become coloured after processing colourful foods.
TECHNICAL INFORMATION
Nominal voltage: 220 - 240V 50 / 60Hz
Nominal input power: 400 W
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard - deliver to scrapyard. Packing foil, PE bags, plastic elements - throw into plastic recycling containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of electric and electronic equipment (valid in EU member countries and other European countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste. Hand over the product to the specified location for recycling electric and electronic equipment. Prevent negative impacts on human health and the environment by properly recycling your product.
Recycling contributes to preserving natural resources. For more information on the recycling of this product, refer to your local authority, domestic waste processing organization or store, where you purchased the product.
This product complies with EU directive requirements on electromagnetic compatibility and electrical safety.
The instruction manual is available at website www.ecg-electro.eu.
Changes in text and technical parameters reserved.

08/05

SIGURNOSNEUPUTE
BEZBEDNOSNA UPUTSTVA
250 69 Klicany, Czech Rep. e-mail: ECG@kbexpert.cz

K+B Progres, a.s.
U Expertu 91 tel.: +420 272 122 111
250 69 Klicany, Czech Rep. e-mail: ECG@kbexpert.cz

250 69 Klicany, Czech Rep. e-mail: ECG@kbexpert.cz

K+B Progres, a.s.
U Expertu 91 tel.: +44 776 128 6651 (English)
250 69 Klicany, Czech Rep. e-mail: ECG@kbexpert.cz

K+B Progres, a.s.
U Expertu 91 tel.: +44 776 128 6651 (English)
250 69 Klicany, Czech Rep. e-mail: ECG@kbexpert.cz

K+B Proges, a.s.
U Expertu 91 tel.: +420 272 122 111
250 69 Klicany, Czech Rep. e-post: ECG@kbexpert.cz

K+B Progres, a.s.
U Expertu 91 tel.: +420 272 122 111
250 69 Klicany, Czech Rep. el. pastas: ECG@kbexpert.cz

K+B Progres, a.s.
U Expertu 91 tel.: +420 272 122 111
250 69 Klicany, Czech Rep. e-pasts: ECG@kbexpert.cz