UM 378 CB - Food Processor BOMANN - Free user manual and instructions

USER MANUAL UM 378 CB BOMANN

This warns you of dangers to your health and indicates possible injury risks. CAUTION: This refers to possible hazards to the machine or other objects. NOTE: This highlights tips and information. General Safety Instructions Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.

• The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not t for com- mercial use. Do not use it outdoors. Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately.

• When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull the plug itself, not the lead) if the appliance is not being used and remove the attached accessories.

• Do not operate the machine without supervision. If you leave the room you should always turn the device off. Remove the plug from the socket.

• The device and the mains lead have to be checked regu- larly for signs of damage. If damage is found the device must not be used.

• Do not try to repair the appliance on your own. Always contact an authorized technician. To avoid the exposure to danger, always have faulty cable be replaced only by the manufacturer, by our customer service or by qualied person and with a cable of the same type.

• Use only original spare parts.

• Pay careful attention to the following “Special Safety Instructions”. Children and Frail Individuals

• In order to ensure your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.

Don’t let small children play with foils for danger of suffo- cation!

• This device is not intended to be used by individuals (including children) who have restricted physical, sensory or mental abilities and/or insufcient knowledge and/or ex- perience, unless they are supervised by an individual who is responsible for their safety or have received instructions on how to use the device.

• Children should be supervised at all times in order to ensure that they do not play with the device. Special safety instructions for the appliance

• When mixing, keep your hands and other objects out of the jug!

• Please handle the blade with extreme care! There is a danger of injury, particularly when emptying the mixing vessel and cleaning the device!

• Never pour liquids hotter than 60°C into the jug! Danger of scalding!

• Place the device on a rm and at surface. Position it is such that it cannot tip over.

• Only turn the device on if the carafe is closed with the lid. The lling aperture in the lid must also be closed.

• Do not remove the lid during operation!

• The device is equipped with a protective switch. This prevents the device from being operated without the carafe in place and without the lid closed. Never try to bridge this circuit breaker!

• Never use the mixer when it is empty!

• Do not overll! Adapt the lling quantity to the foaming behaviour of the items being mixed. Reduce the quantity if necessary.

• Do not carry or lift the appliance during use. Always switch it off rst and pull out the plug. Carry the appliance always with both hands!

• Clean the appliance only as described in “Cleaning”. Installation Mixing Vessel Place the mixing vessel onto the motor housing. Turn the mixing vessel jug anticlockwise until it audibly clicks into place. Use the symbols to help you when doing so. The arrow on the mixing vessel jug and the closed lock on the base must be aligned precisely above each other.19 Lid Put the lid on, so that the lug is located to the left of the handle. Turn the lid anticlockwise until it audibly clicks into place. Use the symbols to help you when doing so. The arrows on the lid and the handle of the blender jug must be aligned precisely above each other. NOTE: If incorrectly installed the mixer cannot be operated. Instructions for Use

• Please clean the mixing vessel and the lid in warm soapy water before initial use.

• Please cut the items that are to be mixed into small pieces beforehand.

• Do not put any hot items into the mixing vessel.

• Short-term operation: The appliance is suitable for use over short periods (KB) to a maximum of 1 minute. Allow to cool for 3 minutes before using again!

• Pulse operation: Pulse mode is turned on by turning the switch to the “P” position and releasing it again. The device should not be used in this mode for more than 1 minute. Allow it to cool down for 3 minutes before using it again!

• Crushing ice cubes: The blades in the blender jug are also suitable for crushing ice cubes. Fill the blender jug only 1/3 full with ice cubes. Only use pulse mode “P” for crushing. Operation Power cord Remove the cable tie from the power cord. Electrical connection Check whether the electrical voltage that you intend to use is the same as that of the machine. Details are to be found on the label on the base. Preparation

1. Ensure that the function switch is in the “0” position.

2. Place the mixing vessel in position.

3. Now put the ingredients that are to be mixed into the mixing

vessel. NOTE: Adapt the lling quantity to the foaming behaviour of the items being mixed. Reduce the quantity if necessary.

NOTE: If incorrectly installed the mixer cannot be operated.

5. Close the rell opening of the lid with the transparent cap.

Please use the recess on the inside of the lid to help you. Tighten the cap.

6. Connect the mains lead to a properly installed safety power

7. Please hold the carafe rmly during mixing.

• For constant mixing (continuous mode): When using on settings 1 to 4, the switch will engage in the respective position. Level 1 = low rpm Level 2 - 3 = medium rpm Level 4 = high rpm Shift the selector to “0” to switch off the appliance.

• For pulse mode (mixing at brief intervals): Move the switch to the “0” position. The switch snaps into place. The appliance is off now. Turn the switch now to position “P”. The switch must be kept in this position for the desired interval. When the switch is released, it returns automatically to “0” position. Adding further ingredients to be mixed Items to be mixed or spices can be fed in through the lling aperture.

• Please switch off the machine before doing so.

• Before you switch the device on again, close the opening. Stopping Operation

1. Turn the switch to the “0” position.

2. Wait until the blade comes to a complete stop.

3. Remove the mains plug from the socket.

4. Remove the mixing vessel. Twist it off the base by turning it

IMPORTANT NOTE: Citrus juices and food containing acids should never be stored in metal vessels. Cleaning Preliminary Cleaning Half ll the mixing vessel with water and turn the switch to “P” for approximately 10 seconds. Then pour out the liquid. General cleaning

• Always remove the plug before cleaning.

• Under no circumstances should you immerse the device in water for cleaning purposes. Otherwise this might result in an electric shock or re. CAUTION:

• Do not use a wire brush or any abrasive items.

• Do not use any acidic or abrasive detergents.20 For thorough cleaning, please remove the mixing vessel. Mixing Vessel

• Clean the mixing vessel immediately after use in warm soapy water.

WARNING: Danger of injury!

The blades on the blade block are sharp.

• After all parts have been cleaned and dried, assemble your mixer as described under Installation. Housing