Q: How to turn on the BOMANN EKI 551 induction cooktop?

The BOMANN EKI 551 is an induction cooktop (not a traditional oven). Here’s how to turn it on and use it: Starting up: Plug the cooktop into a suitable electrical outlet. The ON/OFF control light (5) blinks, indicating that the device is in standby mode. Place a magnetizable cooking utensil (pot, pan, casserole) suitable for induction cooking on the cooking zone. Press the ON/OFF (6) button to turn on the cooktop. The ON/OFF light will stay on continuously. Cooking settings: Set the desired cooking function by pressing the POWER (9) button for power cooking (in watts), or the TEMP (10) button for temperature cooking in degrees Celsius. Increase or decrease the value using the + and - buttons (8): you can adjust the temperature/power at any time during cooking. To keep your dishes warm, press the KEEP WARM (7) button during cooking (preset temperature at 70°C). You can program an automatic cooking duration by pressing the TIMER (1) button: set a stop time between 1 and 120 minutes. The cooktop will turn off automatically. Turning off: Press the ON/OFF (6) button to turn off the cooktop. The cooktop will go into standby mode (light blinks). Unplug the power cord. Allow the device to cool down before storing it. Important: Only use cooking utensils with a magnetizable bottom on this induction cooktop. Knives, forks, spoons, and lids placed on the cooking zone can become very hot as they magnetize.

Question 1

How to solve the low suction problem of the BOMANN BS 984 CB vacuum cleaner?

Accepted Answer

If your BOMANN BS 984 CB vacuum cleaner is not suctioning well, several causes may be responsible. Here are the steps to follow to identify and resolve this issue:

1. Check the filter

A dirty or clogged filter significantly reduces suction power. Remove the filter and clean it according to the manufacturer's instructions. If the filter is too worn or damaged, replace it.

2. Check the bag or tank

If your vacuum cleaner uses a bag, make sure it is not full. A saturated bag prevents proper air circulation. Change it if necessary. For a bagless model, empty and clean the tank.

3. Inspect the hoses and accessories

An obstruction in the hose, brush, or nozzle can block the airflow. Disassemble the removable parts and check that no debris is obstructing the airflow. Clean these elements thoroughly.

4. Check the motor

If after these checks the suction remains weak, the motor may be the cause. A motor malfunction often requires the intervention of a professional or customer service.

By following these tips, you should be able to improve the suction of your BOMANN BS 984 CB vacuum cleaner. If the problem persists, contact an authorized repair center.

Question 2

How to turn on the BOMANN EKI 551 induction cooktop?

Accepted Answer

The BOMANN EKI 551 is an induction cooktop (not a traditional oven). Here’s how to turn it on and use it:

Starting up:

Plug the cooktop into a suitable electrical outlet. The ON/OFF control light (5) blinks, indicating that the device is in standby mode.
Place a magnetizable cooking utensil (pot, pan, casserole) suitable for induction cooking on the cooking zone.
Press the ON/OFF (6) button to turn on the cooktop. The ON/OFF light will stay on continuously.

Cooking settings:

Set the desired cooking function by pressing the POWER (9) button for power cooking (in watts), or the TEMP (10) button for temperature cooking in degrees Celsius.
Increase or decrease the value using the + and - buttons (8): you can adjust the temperature/power at any time during cooking.
To keep your dishes warm, press the KEEP WARM (7) button during cooking (preset temperature at 70°C).
You can program an automatic cooking duration by pressing the TIMER (1) button: set a stop time between 1 and 120 minutes. The cooktop will turn off automatically.

Turning off:

Press the ON/OFF (6) button to turn off the cooktop.
The cooktop will go into standby mode (light blinks).
Unplug the power cord.
Allow the device to cool down before storing it.

Important: Only use cooking utensils with a magnetizable bottom on this induction cooktop. Knives, forks, spoons, and lids placed on the cooking zone can become very hot as they magnetize.

Question 3

How to change the batteries of the BOMANN MS 344 CB milk frother?

Accepted Answer

To change the batteries of your BOMANN MS 344 CB milk frother, follow these simple steps:

Steps to replace the batteries

Turn off the device: Make sure the milk frother is turned off before you begin.
Locate the battery compartment: It is usually found underneath the device or at the back. You may need to remove a cover or unscrew a small screw to access it.
Remove the used batteries: Take out the batteries, paying attention to the indicated polarity (+ and -).
Insert the new batteries: Place the new batteries in, ensuring the correct polarity for proper functioning.
Close the compartment: Replace the cover or screw the battery hatch back on.
Turn on the device: Check that the milk frother is working correctly after the replacement.

Make sure to use batteries suitable for the model to ensure optimal performance.

Question 4

Why aren't the LEDs on my BOMANN KSG 7283 appliance lighting up?

Accepted Answer

For your BOMANN KSG 7283 beverage refrigerator, the interior lighting operates via an On/Off switch located at the back of the appliance. If the LEDs are not lighting up, start by checking that this switch is in the ON position.

Power supply checks: Ensure that the appliance is properly plugged into a functional outlet. Check that the power cord is not damaged and test the outlet with another device to confirm it is supplying power. Also, check that the circuit breaker or electrical protection has not tripped.

The interior LEDs of this model are integrated and cannot be replaced or repaired by the user. Do not attempt to remove the LED lighting cover, as this may damage the system. In case of lighting failure, only an authorized technician or BOMANN customer service can intervene.

Also, check that the door closes properly, as some models have a door switch that activates the lighting when opened. Finally, ensure that the ambient temperature is between +16°C and +32°C, in accordance with your appliance's climate class, as operation outside these limits may affect the refrigerator's overall performance.

If after these checks the LEDs still do not light up and the appliance is properly powered, it is likely an internal defect in the lighting system requiring professional intervention. Contact your retailer or BOMANN after-sales service for repair.

User manual BOMANN : user manuals and guides in PDF

Models BOMANN most viewed

Browse manuals BOMANN by appliance type

Recent questions about devices BOMANN