Hypervolt - Massage device HyperIce - Free user manual and instructions

USER MANUAL Hypervolt HyperIce

RU INHCTpyKcnn no 3KcNpyatauMS Arahan operasi

EN

TO REDUCE RISKS OF ELECTRIC SHOCK, FIRE, AND PERSONAL INJURY, OR PROPERTY DAMAGE, THIS DEVICE MUST BE USED IN ACCORDANCE WITH THE FOLLOWING WARNINGS, CAUTIONS, AND SAFETY INSTRUCTIONS.

IMPORTANT SAFETY INSTRUCTIONS - ORIGINAL INSTRUCTIONS

Read all instructions before using the Hypervolt 2 Pro.

DANGER

To reduce the risk of electric shock:

• Always unplug this device from the electrical outlet immediately after using and before cleaning.
• Do not reach for a device that has fallen into water. Unplug immediately.
• Do not use while bathing or in a shower.
• Do not place or store device where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid.

WARNING

To reduce the risk of burns, fire, electric shock, or injury to persons:
- A device should never be left unattended when plugged in. Unplug from outlet when not in use, and before putting on or taking off parts.
- Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons.
- This device can be used by children aged from 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Use this device only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
- Never operate this device if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or if it has gotten wet. Return the device to a service center for examination and repair.
- Do not carry this device by supply cord or use cord as a handle.
- Keep the cord away from heated surfaces.
- Never operate the device with the air openings blocked. Keep the air openings free of lint, hair, or any substance which may impair the flow of air.
- Never drop or insert any object into any opening.

• Do not use outdoors.
• Do not operate where aerosol (spray) devices are being used or where oxygen is being administered.
• Never operate on a soft surface such as a bed or couch where the air openings may be blocked.
• Do not use device in close proximity to loose clothing or jewelry.
• Keep long hair away from device while in use.
• Cleaning and user maintenance shall not be done by children without supervision.
• Do not remove screws or attempt to disassemble.
• Do not operate continuously for more than one hour. After one hour use, allow device to rest for 30 minutes before re-using.
• Unplug the device after charging and prior to use.
• Use device only according to Operating Instructions.
• When using the Hypervolt 2 Pro use only on dry, clean surfaces of the body by lightly pressing and moving across the body for approximately sixty(60) seconds per region. The Hypervolt 2 Pro should only be used on soft tissue areas of the body and should not be used on any hard or bony areas of the body, including the head. Please immediately stop use of the Hypervolt 2 Pro upon experiencing any pain or discomfort, apart from light muscle soreness. Bruising can occur from use of the Hypervolt 2 Pro, regardless of the pressure setting, and if bruising does occur you should not use the Hypervolt 2 Pro on the bruised area until the bruise is fully healed. Use of the Hypervolt 2 Pro should also be avoided on all bruises, contusions, rashes or irritated or injured areas of the skin until they are fully healed. When using the Hypervolt 2 Pro be sure to keep fingers, toes, hair, and other body parts away from the back of the attachment head to avoid pinching or hair entanglement.

The Hypervolt 2 Pro should only be charged with the double insulated, 18VDC Hyperice charger (model number MX24Z2-1801000) that was supplied with the device. Do not charge the Hypervolt 2 Pro overnight or leave the Hypervolt 2 Pro unattended when charging or in use.

Please do not use the Hypervolt 2 Pro, or any percussion device without first obtaining approval from your physician if any of the following apply:

• Pregnancy, diabetes with complications such as neuropathy or retinal damage, wear of pacemakers, recent surgery or injury, epilepsy or migraines, herniated disks, spondylolisthesis, spondyolysis, or spondylosis, recent joint replacements or IUD, metal pins or plates or any concerns about your physical health. Frail individuals and children should be accompanied by an adult when using any percussion or vibration device. These contraindications do not mean that you are not able to use a percussion or vibration device but we advise that before doing so you consult your physician. Ongoing research is being done on the effects of percussion massage for specific medical disorders that may result in the shortening of the list of contraindications as shown above.

The Hypervolt 2 Pro contains a battery which must be complied with safely at an appropriate e-waste disposal or recycling facility.

CAUTION

The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not disassemble, heat above 100^ or incinerate. Dispose of used battery promptly. Keep away from children.

SAVE THESE INSTRUCTIONS

The Hypervolt 2 Pro is a handheld percussion massage device that delivers targeted pulses of pressure to care for muscles, relieve tension, provide a relaxing massage, accelerate warmup and recovery, and help maintain flexibility and range of motion.

OPERATING

Switch your Hypervolt 2 Pro to the ON position at the base of the handle. The LED band on the handle will illuminate indicating the battery level. Turn the digital speed dial clockwise to the desired speed setting indicated by the LED lights illuminating on the face of the control panel. Your Hypervolt 2 Pro is now ready for use. The lowest speed is at the nine o'clock position and the highest speed is at the twelve o'clock position. Turning the dial clockwise will increase the speed. To turn off the percussion, rotate the digital control dial counter clockwise until all five of the LEDs are turned off.

CHANGING HEAD ATTACHMENTS

Only change attachments after speed setting is turned to off and head attachment stopped moving. To change head attachments, pull the existing head attachment straight out to remove and insert the desired head directly into the opening while pushing firmly. For the Fork head attachment align the tab on the fork with the groove on the opening and push firmly.

CHARGING

Fully charge battery for up to four hours before first use with the battery either attached or detached from the device. To charge, connect the DC end of the supplied 18V charger to the charging port on the bottom of the battery/handle and plug the charger into a wall outlet. The LED light band colors correspond to the charge level ranging from red (low) to green (fully charged). Full charge is indicated when the LED band remains green and fully illuminated. Battery may be recharged at any time and at any battery level. It is not recommended to fully deplete the battery to the red LED level. The average runtime is 2+ hours depending on speed level and pressure applied during use. It is recommended to toggle the power switch to OFF while the device is not in use and during storage and travel.

CLEANING AND STORAGE

Make sure the power is OFF and the battery charger is not attached. Use a damp, clean cloth and gently wipe your Hypervolt 2 Pro. Store in a clean, cool, dry place, not in direct sunlight, when not in use.

CONNECTING TO THE HYPERICE APP

To connect your device to the Hyperice App via Bluetooth® make sure that your device is turned on, Bluetooth® is turned on in your phone, and your device is within close proximity. Select a routine within the Hyperice App and if prompted tap "Scan for Devices." Select your device when it pops up on the screen. HyperSmart™ will automatically start your device and adjust the speed and intensity as you follow along with the routine.

SPECIFICATIONS

1. Digital speed dial
2. Interchangeable head attachments (5)
3. Speed indicators (5)
4. Pressure sensor indicators
5. Bluetooth® connection indicator
6. Removable battery release
7. Handle/rechargeable lithium-ion battery
8. Battery level indicator (LED band)
9. ON/OFF power switch
10. Charging port

AC-DC Charger: 110-240V - 50/60Hz 0.7A - 18.0V1.0A 18.0 W

Rechargeable lithium ion battery 4100mAh

Frequency: Level 1 - 1700/28 Hz, Level 2 - 1900/32 Hz, Level 3 - 2100/35 Hz,

Level 4 - 2400/40 Hz, Level 5 - 2700/45 Hz

Weight: 2.6 lbs/1.18 kg

Designed in USA. Assembled in China.

WARRANTY

If within two years from the date of purchase, this device fails due to a defect in material or workmanship, Hyperice, Inc. will repair or replace the device, or necessary components, free of charge.

This warranty excludes:

(a) damage caused by accident, abuse, mishandling, or transport;
(b) devices subjected to unauthorized repair;
(c) devices not used in accordance with Hyperice care instructions;
(d) damage exceeding the cost of the device;
(e) deterioration of the delivered device resulting from abnormal storage and/or safeguarding conditions on the client's premises, and
(f) failure to provide the dated proof of purchase.

Some states and countries do not allow a limitation of damages, so the foregoing limitation may not apply to you. This warranty guarantees specific legal rights, and but other rights may vary from country to country and from state to state. This warranty service is available through the operating policies and procedures of Hyperice, Inc., and all Hyperice international distributors. If you are a client, please contact the appropriate Hyperice business entity, dealer, or retailer, from whom you directly purchased the device for warranty and return authorization procedures. This warranty is initiated and executed by Hyperice, Inc.

FR

AFIN DE RÉDUIRE LE RISQUE DE CHOC ÉLECTRIQUE, D'INCENDIE, DE DOMMAGES CORPORELS OU MATériELS, CET APPAREIL DOIT ÉTRE UTILISÉ CONFORMÉMENT AUX AVERTISSEMENTS, MISES EN GARDE ET CONSIGNES DE SECURITE SUIVANTS.

CONSIGNES DE SECURITE IMPORTANTES - INSTRUCTIONS D'ORIGINE

YecToTa: Hn8o 1-1700/28 Hz, Hn8o 2-1900/32 Hz, Hn8o 3-2100/35 Hz,

Hn8o 4 - 2400/40 Hz, Hn8o 5 - 2700/45 Hz

Terno:2,6fynTa/1,18kg

PpoekTnpaHo 8 CAU. CrIIO6eHO 8 KITaI.

TAPAHця

AkoBpaMKnTe gBe roGUHn OTo gaTaTa Ha NOKyPKaTa ToBa ycTpoiCTo Bo ce NoBpeGn nopagn geΦeK T MaTePnAna nIu N3pa6Otkata, Hyperice, Inc. 6e3IIaTHo ue nonpaBn IIN nogMeHn ycTPOiCTBOTo IIN Heo6Xogmnte KOMNoHeHTN.

Ta3n rapaunzna n3Klou8a:

a) 5eTn, npuHHeH O T 3IOnOlyka, 3IOyNoTpe6a, HenpaBnH0 6opaBe He nI TpaHcNopT;
6) yctpoicBa, noglokeHn Ha HeoTopn3npaH peMOHT;
8) ycTpoNCT8a, KOITo He ce n3POn38aT 8 cBoTBeTcT8Ne c INHcTpkyKuInTe 3a noggpBXKa Ha Hyperice;
r) uETn, HagBnwaBaunu eHaTa Ha yCTpoiCTBoTo;
g) BloshaBaHe ekCnIooaTaunOHnTe XapaKTePncTnKn Ha gocTaBeHoTo ycTpoiCTBo B pe3yIaTHa Heo6uAaHn YcNoBnHa CbXpaHHe N/nn 3auNTa B NOMEeHnra Ta Ha KIneHTa, n e) HnpegctaBReHa gaTnpaHO gokasaTeJcTBo 3a NOKynka.

HЯkon Μатугн ИgbpxkaBn He no3BoJBaT haJaRaHe Ha orpaHnueHna 3a ΜeTnte, Taka Que ropeNoocOeHTo OrpaHnueHne moKe ga He ce OTHacr 3a Bac. Ta3n rapaHnue rapaHTnpa cNeuФnHn 3akOnoBn npaBa, Ho gpyr nPpAba Moar ga BapnP aR pa3JInuHnTe gbpKaBn N pTaN. Ta3n rapaHnOHa ycLyra e goctbInha ue3 onepaTbHNte noIITnKn I npouegypn Ha Hyperice, Inc.И BCuHKm MekgynapogHn gucptpnbYTopn Ha Hyperice.AKO cTe KIneHT, MoJr, C6bpxkTe ce cbcCbOTBeTHncaTOnaHcck cy6eKt, gnilbp nll TbproBeu Ha Hyperice, ot KOrTo gnpeKTHO cTe 3akyniYcTpoiCTbOTo, 3a cTapTnpaHe Ha npouegypnte 3a npilraHa Ha rapaHnua Ta n pa3peShaBaHe Ha BpbUaHeTo. Ta3n rapaHnue Ce nHnUnpa n N3nbLnBa ot Hyperice, Inc.

CS

V ZAJMU SNÍZENÍ RIZIKA URAZU ELEKTRICKYM PROUDEM, POŽÁRU A ZRANÉNÍ OSOB NEBO POSKOZENÍ MAJETKU MUSÍ BYT TENTO PRISTROJ POUZÍVÁN V SOULADU S NÁSLEDUJÍCÍM I VAROVÁNÍM I, UPOZORÑENÍM I A BEZPEÇNOSTNÍM I POKNY:

DÜLEZITÉ BEZPECNOSTNI POKNY - PUVODNI POKNY

TYTO POKYNY DOBRE USCHOVEJTE

Nabijecka: 110-240 V - 50/60 Hz 0,7 A - 18,0 V 1,0 A 18,0 W

Dobijec lithium-ionová baterie 4100 mAh

Frekvence: Uroven 1 - 1700/28 Hz, uroven 2 - 1900/32 Hz, uroven 3 - 2100/35 Hz,

Uroven 4 - 2400/40 Hz, uroven 5 - 2700/45 Hz

UDSKIFTNING AF HOVEDTILBEHØR

AC-DC-oblader: 110-240 V - 50/60 Hz 0,7 A - 18,0 V 1,0 A 18,0 W

Genopladeligt litium-ion-batteri 4100 mAh

Frekvens: Niveau 1 - 1700/28 Hz, niveau 2 - 1900/32 Hz, niveau 3 - 2100/35 Hz,

Niveau 4 - 2400/40 Hz, niveau 5 - 2700/45 Hz

Vaegt: 1,18 kg/2,6 lbs

Designet i USA. Samlet i Kina.

GARANTI

OLULISED OHUTUSJUHISED - ALGSED JUHISED

Sagedus: tase 1 - 1700/28 Hz, tase 2 - 1900/32 Hz, tase 3 - 2100/35 Hz

tase 4 - 2400/40 Hz, tase 5 - 2700/45 Hz

Kaal: 1,18 kg (2,6 naela)

Disainitud USA-s. Seade on kokku pandud Hiinas.

GARANTII

Caricabatterie CA-CC: 110-240 V - 50/60 Hz 0,7 A - 18,0 V 1,0 A 18,0 W

AC/DC-oblader: 110-240 V - 50/60 Hz 0,7 A - 18,0 V 1,0 A 18,0 W

Herlaadbare lithium-ionbatterij van 4100 mAh

Frequentie: niveau 1 - 1700/28 Hz, niveau 2 - 1900/32 Hz, niveau 3 - 2100/35 Hz,

niveau 4 - 2400/40 Hz, niveau 5 - 2700/45 Hz

Incarcator c.a.-c.c.: 110-240 V - 50/60 Hz 0,7 A - 18,0 V 1,0 A 18,0 W

Baterie reincarcabilă cu ioni de litiu de 4100 mAh

Greutate: 1,18 kg (2,6 lbs)

Projecat in SUA. Asamblat in China.

GARANTIE

Aceastā garantié exclude:

AC-DC-laddare: 110-240 V - 50/60 Hz 0,7 A - 18,0 V 1,0 A 18,0 W

JH 1n HJ 1000000000000000000000000000000000000000000000000000000000000000000000000000

i

3apndoe yctpoCTBO AC-DC: 110 - 240 B, 50/60 F, 0,7 A - 18,0 B, 1,0 A, 18,0 BT

PepesapkaemblnTm-NOHbAkkymyTop 4100 M

Yactota: nepbary ckopoctb - 1700/28 T, Btopaay ckopoctb - 1900/32 T, TpeTb yckopoctb - 2100/35 T, YetBepTay ckopoctb - 2400/40 T, Ptaay ckopoctb - 2700/45 T

Macca:1,18Kr/2,6yHTa

Pa3pa6oTaHO B CUSA. N3roToBJeHO B KInTae.

ГAPАНТИ

EcnB TeueHne DByx Iet C DaTbI NOKyPkN DaHHoe yCTpOcTBo BbIJeT n3 CTPOr n3-3a DeΦeKTa MaTePnAna nn PpOn3BOdCTBeHHoro 6paKa, Hyperice, Inc. 6ecnPaTHo OTpeMoHTnpyEt nn 3aMeHIT n3dJIe Ne HEO6XODMbIe y3bln dTeaII.

DaaHnra rapaHTnHe paCnpocTpaHreTcHa:
(a) yuep6, npuHHeHHbI B pe3yIbTaTe HecuaTHoro clya, rpy6oro HapyuHnnpaBn 3KcNyaTaun, HeocToPOxHOrO o6paueHn nn TpaHCnOpTIpOBKn;
(b) yctpoiCTBa, noBBeprHyTbIe HecaHKUOHOPOBaHHOMy peMOHTy;
(c) yctpoicTba, nCnoIb3yEmbIe He B COOTBeTcTBn C INHCTpyKUmaMn no yxOdy Hyperice;
(d) yüep6, npeBbIaUoJn CTOnMocTb yCTpOYCTBa;
(e) yxyuueHne KaueCTBa npedocTbAeHHoro ycTpoCtBa Bpe3yIbTaTe HnnpaBnIbHO xpaHeHn (nn) OTCYCTBn Tpe6yEmbix ycNoBn 3KcNpyataun Ha TeppntOpn KJnEHTa; n
(f) HeBO3MOXHOCTb IpeIOCTaBUTb DaTnPOBaHHbI JOKyMeHT, NOITBePjDaIoumni NOKyNkY.

Ha TeppHTOpHn HeKOTOpbIX uTATOB nCTpaH He DOnyUcKaeTCB BBeJeHne OrpaHnueHnno BO3MeUeHNIO y6bITKOB, NO3TOMy BAu ClyaM MoKeT He NOnaDaTb NOD BbIweyKa3AHHOe ORpaHnueHne. B pAMkax HacToaSei rapaHTnN oEocNeuBAIoTcR ONpeDeJIeHHbIe 3aKOHbIe npaBa, Ondako YcNoBnO bcEpcHeHn IpyrNx PpaB B pa3hBix CTpaHax N UStaTaX MOrY T OTnuaTbcra. rapaHTnHO ocClyuNbAHnpeDcTbAETcR B COOTBeTCTBnC TEkyueo nolNTIKoN i npOeDypamn KOMpAHn Hyperice, Inc., a TaKxe BCex MeJxHapOdHbIX DCtPrb6bIOtopoB Hyperice. EcIn BBIAreTeCB KIneHTOM, CBxHITecB C COOTBeTCTByIOUM NOpda3deJeHem Hyperice, dINlePOM INI KOMpAHne, 3aHIMaIOUeICr po3HNUHOI pOdaKe, y KOTopBX Bbl HapPMyIO npNo6peTIy UcTPOIcTBQ, IJI POlyueHn rapaHTnHoro ObcLyuNbAHn IN BbINONHeHn IpoUeDyp IO Bo3BpATy. DaHHa rapaHTnI ppeOCTabJIeTcR KOMpaHneHyperice, Inc.

UNTUK MENGURANGKAN RISIKO RENJATAN ELEKTRIK, KEBAKARAN DAN KECEDERAAN DIRI ATAU KEROSAKAN HARTA BENDA, PERANTI INI PERLU DIGUNAKAN MENGIKUT AMARAN, PERINGATAN DAN ARAHAN KESELAMATAN BERIKUT.

ARAHAN KESELAMATAN PENTING - ARAHAN ASAL

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Hyperice, Inc., 525 Technology Drive, Suite 100, Irvine, California 92618 USA

Copyright 2021 © Hyperice, Inc. All rights reserved.

170-00075 Rev 1