POE162S - Switch Planet - Free user manual and instructions

Product Type	Gigabit PoE Splitter
Model	PLANET POE-162S
Supported PoE Standards	IEEE 802.3af / IEEE 802.3at
Network Interface	1 x RJ-45 STP input (PoE + data), 1 x RJ-45 STP data output
DC Output Connector	1 x DC jack connector
Data Rate	10/100/1000 Mbps (Gigabit)
PoE Input Voltage	802.3af: 48 V DC; 802.3at: 52~56 V DC
DC Output Voltage (selectable via DIP)	12 V DC / 2 A or 24 V DC / 1 A
DIP Switch	Output voltage selection (12V or 24V)
LED Indicator	PoE active (green): indicates connection to a 802.3af/at PSE
Dimensions (L x W x H)	95 x 70 x 25 mm
Weight	111 g
Housing Material	Plastic
Recommended Network Cable	Cat. 5/5e/6 UTP, up to 100 m
Number of Powered Devices	1
Operating Temperature	0 ~ 50 °C
Storage Temperature	-10 ~ 70 °C
Humidity	5 ~ 95 % (non-condensing)
Certifications	FCC Class A, CE
Package Contents	PoE splitter, user manual, 15 cm UTP cable, 2 DC power cables
Warranty	2 years (standard)

Frequently Asked Questions - POE162S Planet

What is the PLANET POE-162S?

The POE-162S is a Gigabit PoE splitter compliant with IEEE 802.3af/at standards. It separates power and data from a PoE Ethernet cable to power a non-PoE device (such as an IP camera, access point) while providing a Gigabit network connection.

How to choose the output voltage with the DIP switch?

The POE-162S has a DIP switch to select the output voltage: 12V DC / 2A or 24V DC / 1A. The default position is 12V DC. Ensure the voltage matches your device's requirements before connecting power.

Can I use the POE-162S with a non-PLANET PoE injector?

Yes, as long as the injector is compliant with IEEE 802.3af or IEEE 802.3at. The POE-162S works with any PSE (Power Sourcing Equipment) that meets these standards.

What is the maximum data rate supported by the POE-162S?

The POE-162S supports 10/100/1000 Mbps (Gigabit Ethernet), making it suitable for high-performance applications such as HD IP cameras or Wi-Fi 5/6 access points.

How to know if the POE-162S is receiving power?

A green LED on the housing lights up when the splitter is connected to a compatible PoE source (802.3af/at). If it does not light up, check the cable and the compatibility of the injector or PoE switch.

What types of cables can I use with the POE-162S?

Use a Cat. 5, 5e, or 6 UTP cable for a maximum distance of 100 meters. The included cable (15 cm) is for the connection between the splitter and the device.

Can the POE-162S power multiple devices?

No, the POE-162S is designed to power only one device at a time. To power multiple devices, use a multi-port PoE switch or multiple splitters.

What to do if the POE-162S does not work?

Check the following: 1) The PoE source is on and compliant. 2) The Ethernet cable is properly connected. 3) The selected output voltage matches your device. 4) The LED is on. If the problem persists, contact PLANET support.

What is the maximum distance between the PoE injector and the splitter?

The maximum distance is 100 meters with Cat. 5e or 6 UTP cable. Beyond that, use PoE extenders or better quality cable.

Is the POE-162S compatible with PTZ cameras?

Yes, the POE-162S is often used to power PTZ cameras, access points, and other network devices requiring 12V or 24V DC and a Gigabit connection.

USER MANUAL POE162S Planet

1. Overview 1-1
2. Package Contents 1-1
3. Product Outlook ...... 1-2
4. LED Indication 1-2
5. Hardware Installation 1-3
6. Product Specification 1-7

Française

Thank you for purchasing PLANET IEEE 802.3at / af Power over Ethernet Splitters. These PoE splitters will work with any Power Sourcing Equipment (PSE) that also supports the IEEE 802.3af / at standards. The models bellows are included:

Model PoE Standard DC Power Out Power Input Pass-thru. Speed
POE-151S	IEEE 802.3af 5V / 1	2V 48V DC 10/100	Mbps
POE-152S	IEEE 802.3af 5V / 1	2V 48V DC 10/100	/1000Mbps
POE-162S	IEEE 802.3at / af 12	V / 24V 56V DC 1	0/100/1000Mbps

Unless specified, terms of "PoE Splitter" in the following sections means the model listed above.

2. Package Contents

Upon open the box of the PoE Injector and carefully unpack it. The box should contain the following items:

POE-151S / POE-152S POE-162S
■ The 802.3af Power over Ethernet Splitter x 1■ User's Manual x 1■ 15cm UTP Straight Network Cable x 1■ DC Plug Cable x 2	■ The IEEE 802.3at Gigabit High Power over Ethernet Splitter x 1■ User's Manual x 1■ 15cm UTP Straight Network Cable x 1■ DC Plug Cable x 2

Note

If any of these pieces are missing or damaged, please contact your dealer immediately. If possible, retain the carton including the original packing material, and use them again to repack the product in case of a need to return for repair.

3. Product Outlook

POE-151S / POE-152S

There are two RJ-45 Twisted-Pair jack, one LED indicator, one DC 5V / 2A, 12V / 1A DIP switch and one DC Plug connector.

Figure 1: POE-151S / POE-152S

POE-162S

There are two RJ-45 Twisted-Pair jack, one LED indicator, one DC 12V / 2A, 24V / 1A DIP switch and one DC Plug connector.

Figure 2: POE-162S Overview

4. LED Indication

LED Color Function
PoE In Green		Lights to indicate the port is connected with IEEE 802.3af / at PSE device.

5. Hardware Installation

This section describes the hardware features of PoE Splitter. Before connecting any network device to the PoE Splitter, refer to this chapter carefully.

5.1 Before Installation

The PLANET PoE Splitter separates the power out and provides two kind of DC power output through its DIP switch and its voltage and current shown as below:

Model DIP	switch for DC Voltage Output Default Mode
POE-151S	5V DC / 2A	5V DC
POE-152S	12V DC / 1A
POE-162S	12V DC / 2A	12V DC
	24V DC / 1A

POE-151S / POE-152S POE-162S

Note

The PLANET PoE Splitter and PLANET PoE Injector (ex. POE-151, POE-152 and POE-161) can be installed in pair. Use of third-party PoE Injector device is allowed if the device complied with IEEE 802.3at or IEEE 802.3af standard.

5.2 802.3af/at Device Installation

The PLANET PoE Splitter also provide the alternative to make the non IEEE 802.3af / 802.3at devices the possibility to connect with an IEEE 802.3af / 802.3at PSE power device like Power over Ethernet Injector or Power over Ethernet Switch, the figure is as below.

graph LR
    A["802.3af in-line power Switch"] -->|Data + Power| B["POE-151S"]
    B -->|Data| C["POE-152S"]
    C -->|DC Power| D["Wireless AP"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333

Figure 3: Connection to IEEE 802.3af Device

graph LR
    A["802.3at in-line power switch"] -->|Data + Power| B["POE-162S"]
    B --> C["PTZ Speed Dome"]
    D["100 meters"] --> E["Data"]
    D --> F["DC"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#ffc,stroke:#333
    style F fill:#fcc,stroke:#333

Figure 4: Connection to IEEE 802.3at Device

Note

With IEEE 802.3af / 802.3at standard; the PLANET PoE Splitter also can co-work with IEEE 802.3af / 802.3at End-Span Switch that feeding power over pin 1, 2, and 3, 6.

5.3 PoE Injector and PoE Splitter Installation

For non PoE remote device or Ethernet equipment, the PoE Splitter and PoE Injector can runs in pair to provide DC Power for those devices, the table below shows the model of PLANET PoE Injectors:

Model PoE Standard Max. PoE Out Power In Pass-thru. Speed
POE-151 IEEE 802.3af 15.4 Watts 48V DC 10/100Mbps
POE-152 IEEE 802.3af 15.4 Watts 48V DC 10/100/1000Mbps
POE-161 IEEE 802.3at / af 30 Watts 56V DC 10/100/1000Mbps

Steps:

1. [Switch & PoE Injector] Connect a standard network UTP cable from Switch / workstation to "Ethernet" port of PoE Injector and the PoE Injector get DC power from attached power adapter.

2. [PoE Injector & PoE Splitter]

■ Connect the long UTP cable between the port "Ethernet+DC" of PoE Injector to the port "Ethernet+DC" (or "PoE IN") of PoE Splitter.
■ The PoE LEDs of both Injector and Splitter will light on continuance.

1. [PoE Splitter]

■ Connect the UTP cable in the package from "Ethernet" of the PoE splitter to the RJ-45 port of remote device.

■ Adjust proper DC power output and connect proper DC plug from "DC OUT" of PoE Splitter to the remote device.

100 meters

graph LR
    A["Ethernet Switch"] -->|Data| B["POE-151/152 PoE Injector"]
    B -->|Data + Power| C["POE-151S PoE Splitter"]
    C -->|Data| D["Wireless AP"]
    B -->|DC Power| E["AC"]
    C -->|DC Power| F["Power Line (DC)"]
    C -->|DC Power| G["Power Line (AC)"]
    C -->|DC Power| H["100Base-TX UTP with PoE"]

Figure 5: Connection Architecture via 802.3af PoE Injector and PoE Splitter

graph LR
    A["Switch"] --> B["POE-161"]
    B --> C["POE-162S"]
    C --> D["PTZ Camera"]
    B --> E["Data"]
    B --> F["Power"]
    B --> G["AC"]
    B --> H["Power Line (AC)"]
    C --> I["DC"]
    C --> J["Power Line (DC)"]
    style A fill:#f9f,stroke:#333
    style D fill:#ccf,stroke:#333
    style E fill:#cfc,stroke:#333
    style F fill:#fcc,stroke:#333
    style G fill:#ffc,stroke:#333
    style H fill:#cfc,stroke:#333
    style I fill:#fcc,stroke:#333
    style J fill:#cfc,stroke:#333

Figure 6: Connection Architecture via 802.3at PoE Injector and PoE Splitter

Note

Please ensure the PoE Splitter output voltage is correct before applying power to remote device otherwise, it may damage the remote device.

6. Product Specification

Product POE-151S POE-152S POE-162S
Hardware Specification
Interface	"Data" Output Port 1 x RJ-45 STP
	"PoE (Data + Power)" Input Port	1 x RJ-45 STP
	DC Out Plug Connector 1
LED Indicator System: PoE in Use x 1 (Green)
Network Cable UTP Cat. 5/5e/6, up to 100m (328ft)
Data Rate 10/100Mbps 10/100/1000Mbps 10/100/1000Mbps
Dimension (W x D x H) 73 x 55 x 24 mm 73 x 55 x 24 mm 95 x 70 x 25 mm
Weight		50g 50g	111g
Power over Ethernet
PoE Standard		IEEE 802.3af Power over Ethernet / PD		IEEE 802.3at / af Power over Ethernet / PD
PoE Power Input		802.3af 48V DC		802.3at 52~56V DC
DIP Switch		5V / 12V DC Output voltage	5V / 12V DC Output voltage	12V / 24V DC Output voltage
Number of device can be powered		1	1	1
Standards Conformance
IEEE 802.3 10Base-T Ethernet		■	■	■
IEEE 802.3u 100Base-TX Fast Ethernet		■	■	■
IEEE 802.3ab 1000Base-T Gigabit Ethernet		-	■	■
IEEE 802.3af Power over Ethernet		■	■	■
IEEE 802.3at Power over Ethernet		-	-	■
Regulation Compliance		FCC Class B, CE mark	FCC Class A, CE mark	FCC Class A, CE mark
Environment
Operating Temperature		0 ~ 50 Degree C
Storage Temperature		-10 ~ 70 Degree C
Humidity		5 ~ 95% (Non-condensing)

1. Vue d'ensemble

Remarque

Hinweis

Nota

Figura 5: Connection Architecture via 802.3af PoE Injector and PoE Splitter

graph LR
    A["Switch"] --> B["POE-161"]
    B --> C["POE-162S"]
    C --> D["PTZ Camera"]
    B --> E["Data"]
    B --> F["Power"]
    C --> G["Data + Power"]
    style A fill:#f9f,stroke:#333
    style D fill:#ccf,stroke:#333
    style B fill:#cfc,stroke:#333
    style C fill:#fcc,stroke:#333
    style E fill:#ffc,stroke:#333
    style F fill:#ffc,stroke:#333
    style G fill:#cfc,stroke:#333

Figura 6: Connection Architecture via 802.3at PoE Injector and PoE Splitter

Nota

graph LR
    A["802.3af in-line power Switch"] --> B["Data"]
    B --> C["POE"]
    C --> D["POE-151S"]
    D --> E["POE-152S"]
    E --> F["Data"]
    F --> G["DC"]
    G --> H["Power"]
    H --> I["Wireless AP"]
    style A fill:#f9f,stroke:#333
    style I fill:#bbf,stroke:#333
    note right of A: 100 meters
    note right of D: 100Base-TX UTP
    note right of G: DC Power Line (DC)
    note right of H: PoE 100Base-TX UTP with PoE

Notas

EC Declaration of Conformity

For the following equipment:

*Type of Product : IEEE802.3af Power over Ethernet Splitter

*Model Number : POE-151S, POE-152S

* Produced by:

Manufacturer's Name : Planet Technology Corp.

Manufacturer's Address: 10F., No.96, Minquan Rd., Xindian Dist.,

New Taipei City 231, Taiwan (R.O.C.).

Is here with confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2004/108/EC).

For the evaluation regarding the EMC, the following standards were applied:

EN 55022 (Class B : 2006)

EN 61000-3-2 (2006)

EN 61000-3-3 (1995+A1:2001+A2:2005)

EN 55024 (1998+A1:2001+A2:2003)

IEC 61000-4-2 (2001)

IEC 61000-4-3 (2008)

IEC 61000-4-4 (2004)

IEC 61000-4-5 (2005)

IEC 61000-4-6 (2008)

IEC 61000-4-8 (2001)

IEC 61000-4-11 (2004)

Responsible for marking this declaration if the:

Manufacturer

☐ Authorized representative established within the EU

Authorized representative established within the EU (if applicable):

Company Name: Planet Technology Corp.

Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)

Person responsible for making this declaration

Name, Surname

Kent Kang

Position / Title :

Product Manager

Taiwan

Place

29th, Sep., 2009

Date

Legal Signature