KA 5762 - Coffee maker SEVERIN - Free user manual and instructions
Find the device manual for free KA 5762 SEVERIN in PDF.
| Technical specifications | Filter coffee machine, 900 W power, 1.25 L capacity |
|---|---|
| Coffee type | Ground coffee |
| Features | Keep warm function, water level indicator, permanent filter |
| Usage | Easy to use with a single button, removable water tank |
| Maintenance | Easy to clean, dishwasher-safe removable parts |
| Safety | Anti-drip system, overheating protection |
| Dimensions | Compact dimensions, easy to store |
| Weight | Approximately 1.5 kg |
| Warranty | 2 years |
Frequently Asked Questions - KA 5762 SEVERIN
User questions about KA 5762 SEVERIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Coffee maker in PDF format for free! Find your manual KA 5762 - SEVERIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KA 5762 by SEVERIN.
USER MANUAL KA 5762 SEVERIN
Before using the appliance, read the following instructions carefully and keep this manual for future reference. The appliance must only be used by persons familiar with these instructions.
Connection to the mains supply
The appliance should only be connected to an earthed socket installed in accordance with the regulations. Make sure that the supply voltage corresponds with the voltage marked on the rating label. This product complies with all binding CE labelling directives.
Familiarisation
- Power cord with plug
- Cable storage space (at the rear)
- Display with clock & timer control buttons
- Rotary control
- Fresh-water reservoir lid with fill opening
- Fresh-water reservoir with cup scale and Max marking
- Filter system
- Glass jug with lid
- Hotplate
- Rating label (at the bottom of the unit)
- On/Off/Start button
- Main indicator light
- Coffee-brewing 'Standard'
- Coffee-brewing 'Aroma'
- Extended Keeping warm
- Timer
- Descalng
Important safety instructions
In order to avoid hazards, and to comply with safety requirements, repairs to this electrical appliance or its power cord must be carried out by our customer service. If repairs are needed, contact our customer service department by phone or email (see appendix).
Before cleaning the appliance, ensure it is disconnected from the power supply and has cooled down completely. For detailed information on cleaning the appliance, please refer to the section Cleaning and care.
- To avoid the risk of electric shock, do not clean the appliance with liquids or immerse it.
- Caution: Any misuse can cause severe personal injury.
The appliance must not be operated in a closed cabinet. - Caution: The hot-plate heats up during operation and will remain hot for some time afterwards.
-
Caution: This symbol indicates that the area around the water reservoir heats up during use and will remain hot for some time afterwards.
This appliance is intended for domestic or similar applications, such as the -
staff kitchens in shops, offices and other similar working environments,
- agricultural working environments,
- by customers in hotels, motels etc. and similar accommodation,
-
in bed-and breakfast type environments.
-
This appliance may be used by children (at least 8 years of age) and by persons with reduced physical, sensory or mental capabilities, or lacking experience and knowledge, provided they have been given supervision or instruction concerning the use of the appliance and fully understand all dangers and safety precautions involved.
Children must not be permitted to play with the appliance.
Children must not be permitted to carry out any cleaning or maintenance
work on the appliance unless they are supervised and at least 8 years of age.
-
The appliance and its power cord must be kept well away from children under 8 at all times.
-
Caution: Keep any packaging materials well away from children – these are a potential source of danger, e.g. of suffocation.
- Every time the appliance is used, the main body including the power cord as well as any attachment fitted should be checked thoroughly for any defects. Should the appliance, for instance, have been dropped onto a hard surface, or if excessive force has been used to pull the power cord, it must no longer be used: even invisible damage may have adverse effects on the operational safety of the appliance.
- Before use, make sure that the handle of the glass carafe is properly and securely fitted.
- During operation, the coffee maker must be placed on a level, non-slip surface, impervious to splashes and stains.
- Do not allow the appliance or its power cord to touch hot surfaces or to come into contact with any heat sources.
- To prevent the danger of hot water or steam being emitted, always switch off the coffee maker and allow sufficient time for the appliance to cool down before it is opened or any accessories or attachments are removed.
- Do not leave the appliance unattended while it is in use.
-
Remove the plug from the wall socket
-
in case of any malfunction,
- during cleaning,
-
if the appliance is not being used for an extended period of time.
-
When removing the plug from the wall socket, never pull on the power cord; always grip the plug itself.
- Do not allow the power cord to hang free; the cord must be kept well away from hot parts of the appliance.
- No responsibility will be accepted if damage results from improper use, or if these instructions are not complied with.
Before using for the first time
- Unpack the appliance and remove all packaging materials, adhesive tapes and promotional stickers etc.
- Clean the glass jug and filter insert as described in Cleaning and care.
Setting the clock:
Connect the appliance to the mains and set the time using the h and min keys on the display. If the appliance has been disconnected from the mains, the current time and timer settings must be re-entered.
- Before making coffee for the first time, let the appliance go through 2 or 3 filtration cycles using the indicated maximum amount of cold water, but without using ground coffee.
- This should also be done if the appliance has not been used for an extended period of time, and after descaling.
Display readings and functions
Rotary control
To select a particular function, by turning the rotary control clockwise or anti-clockwise as required.
To return the appliance to stand-by mode.
On/Off button
To start a particular function, interrupt a process, switch the appliance off and on again.
Main indicator light
Indicates that the appliance is ready for use.
Coffee-brewing 'Standard'
The coffee is brewed in standard mode and then kept warm for 35 minutes.
Coffee-brewing 'Aroma'
The coffee is brewed, fully-flavoured, and then kept warm for 35 minutes.
Extended Keeping warm
The coffee maker switches off automatically, while the hot-plate is activated for another 35 minutes.
Timer
Timer programming. The brewing process of the type to be selected ('Standard' or 'Aroma') starts at the pre-set time.
D escaling
The unit is being descaled (see Cleaning and care / Descaling).
Light ring
Off - the appliance is switched off
On - the appliance is in use
Flashing - the appliance is waiting for an input, or the brewing cycle is complete
Display
The display shows the current time. The keys on the display can be used to set the hours and minutes.
- With the rotary control set to the timer setting is shown and can be changed using the keys on the display.
Preparing the unit
- Open the water reservoir lid and fill the reservoir with the required quantity of cold water (min. 3 cups).
- Be careful not to exceed the maximum water level of 8/12 cups as otherwise boiling water may be ejected and cause burns.
- Two measuring scales on the water reservoir help you to find the correct amount of fresh water:
the left scale is for normal-sized cups (around 125 ml).
the right scale is for smaller cups.
Replace the reservoir lid.
Pull out the swing-out filter and remove the filter holder lid.
- Insert a size-4 paper filter into the filter insert, first folding down the perforated sides of the filter.
- Fill with ground coffee
Standard:
Per cup: approx. 6g = 2 tsp. of medium-fine ground coffee
Aroma:
Per cup: approx. 7.5g of ground coffee
The amount of coffee used may be altered to taste.
- Replace the filter lid and close the swing-out filter.
- Place the glass jug with its lid fitted onto the hotplate.
The jug lid opens the non-drip valve of the filter holder.
Selecting the brewing mode
'Standard'
For brewing a standard coffee with a balanced, soft aroma. The coffee is brewed at the ideal temperature, with the water released at intervals.
- Prepare the appliance as described in Preparing the unit.
Press the rotary control to switch the appliance on. - Turn the rotary control until the symbol is lit.
Press the rotary control. The brewing process starts.
'Aroma'
For brewing coffee with a full-bodied, strong aroma. The coffee is brewed at the ideal temperature, with the water released at intervals.
- Prepare the appliance as described in Preparing the unit.
Press the rotary control to switch the appliance on. - Turn the rotary control until the symbol is lit. The light ring flashes blue.
Press the rotary control. The brewing process starts. The light ring shows steady blue.
Timer
To start the brewing cycle at a pre-set time, first prepare the appliance as described in Preparing the unit. Then set the desired time:
- Turn the rotary control until the symbols and are lit.
Use the keys on the display to set the hours and minutes.
Now select the desired brewing programme:
Turn the rotary control to or 001
Press the rotary control to confirm.
The light ring, the main indicator light and are lit.
The coffee maker starts brewing at the pre-set time.
The brewing process
The light ring, the main indicator light and are lit.
- The water in the reservoir is brought to the boil. With the water reservoir filled to its maximum capacity, it will take about 5 minutes to heat the water.
- Once the perfect brewing temperature has been reached the valve inside the water reservoir opens and the brewing cycle begins.
- The 'click' sound indicates that the valve opens and closes for a perfect brewing result.
The filtered coffee starts flowing into the glass jug.
- Once the water has passed through, the light ring lights up briefly, and the hot-plate is activated for around 35 minutes. The unit switches off automatically afterwards.
To interrupt the brewing cycle, press the rotary control again to turn the appliance off.
Hint: When preparing less than 8 cups, the glass jug can be removed and the appliance switched off as soon as brewing is complete, i.e. when no more coffee comes out (see Stand-by-mode & switching off).
After the brewing cycle
- Remove the glass jug from the unit. The non-drip valve of the filter holder will close and prevent coffee from dripping onto the hotplate.
- To keep remaining coffee hot, replace the glass jug back onto the hotplate.
The plate is kept hot for around 35 minutes after brewing is complete. However, it may be turned off by selecting and pressing the rotary control
Should you wish to start several brewing cycles one after the other, allow the machine to cool down for at least 5 minutes with the reservoir lid open before reusing it. Use cold water only to refill the water reservoir.
Caution: Remember that the water reservoir and the reservoir lid are still hot after the brewing cycle has been completed and hot steam may escape from the reservoir when opening the lid (Caution: Danger of scalding).
Keeping-warm
To keep the coffee hot longer after the automatic switchoff, switch the unit on again by pressing the rotary control
- Turn the rotary control until the symbol is lit.
- Press the rotary control. The coffee is now kept hot. The light ring, the main indicator light and are lit.
- The hot-plate remains on for an additional 35 minutes. Afterwards, the unit switches off automatically.
Stand-by-mode & switching off
- If the brewing cycle or keep-warm function has been interrupted, the appliance can be returned to standby mode, or switched off.
- Turn the rotary control until only the main indicator light remains lit. The unit is now in stand-by-mode.
- The unit can be switched off by selecting and pressing the rotary control.
Cable storage
The cable storage space serves for storing the cable. The recess at the bottom facilitates limiting the length of the power cord.
Cleaning and care
- Before cleaning the appliance, ensure it is disconnected from the power supply and has cooled down completely.
- For safety reasons the coffee maker should not be treated with water or liquids and should never be immersed.
- Do not use harsh abrasive cleaners.
After each use:
Clean the filter system and glass jug:
To remove the coffee grounds, open the swing-out filter, take off the lid and lift out the filter insert. Take out the paper filter with the coffee grounds; as a natural substance, the coffee grounds may be composted. The glass jug, its lid, the filter lid and the filter insert may be cleaned in hot soapy water or in the dishwasher.
The jug lid can be taken off for easy cleaning.
The individual parts should be thoroughly dried and then re-fitted to the unit.
If required:
- Wipe the outer surfaces using a clean damp cloth; dry thoroughly afterwards.
- Wipe the inside of the reservoir with a clean damp cloth. To prevent the outlet-valve of the water reservoir from getting clogged, use a non-fluffy cloth to clean the water reservoir and the glass jug.
Dscaling
- Depending on the water quality (lime content) in your area as well as the frequency of use, all thermal household appliances using hot water need decalging (i.e. removal of lime deposits) on a regular basis to warrant proper functioning.
- Any warranty claim will be null and void if the appliance malfunctions because of insufficient descaling.
- The button starts flashing when the unit needs descending.
- Descaling must not be done right away, but should be done soonest.
- Descaling may also be initiated any time prior to the button flashing.
- For descending we recommend using a mixture of 6 cups of water and 50ml of vinegar essence.
- Place a paper filter into the plastic filter (without using ground coffee).
- Fill the cold descending solution into the water reservoir.
- Turn the rotary control to and press it. The light ring, the main indicator light and are lit.
- Pour away the descending solution once it has passed through the system. Do not pour descalers down enamel sinks. Do not use the descending solution a second time.
- Once descending has finished, the light ring starts flashing.
- To clean the machine after descending operate it twice or three times with fresh cold water only (without using ground coffee). To start the process, select the symbol
and press the rotary control
Disposal
Devices marked with this symbol must be disposed of separately from your household waste, as they contain valuable materials which
can be recycled. Proper disposal protects the environment and human health. Your local authority or retailer can provide information on the matter.
If a fault occurs...
... if the brewing cycle takes longer than normal, or ... if the valve of the water reservoir has become leaky,
- descale the water reservoir (see section Cleaning and care/Descaling).
... if hot water is ejected through the reservoir lid, or ... if the valve does not open although the boiling process is complete,
the water reservoir has been overfilled.
- When filling the water reservoir be careful not to exceed the maximum water level of 8 cups and not to remain below the 3-cup mark for medium-sized coffee cups.
