H150 - Headphones LOGITECH - Free user manual and instructions

Features	Details
Product type	Headphones
Connectivity	Wired, 3.5 mm jack
Microphone	Built-in microphone with noise reduction
Frequency response	20 Hz - 20 kHz
Impedance	32 Ohms
Weight	Approx. 150 g
Usage	Ideal for calls, gaming, and music listening
Compatibility	Compatible with most devices equipped with a 3.5 mm jack
Maintenance	Clean regularly with a soft cloth, avoid moisture
Warranty	1 year
Safety information	Avoid prolonged exposure to high volumes to prevent hearing damage

Frequently Asked Questions - H150 LOGITECH

How do I connect the Logitech H150 headset to my computer?

To connect the Logitech H150 headset to your computer, plug the 3.5 mm audio connector into your PC's audio jack. Make sure the microphone is also connected if your computer has a separate input.

The headset sound is too low, what should I do?

Check your computer's volume level and ensure it is set to an adequate level. You can also adjust the volume directly on the headset if your model has this feature.

The microphone is not working, what should I check?

Make sure the microphone is properly connected and that mute is not enabled. Also check your communication software settings to ensure the Logitech H150 microphone is selected as the input device.

My Logitech H150 headset is uncomfortable, what can I do?

Try adjusting the ear pads or the headband. If the headset is too tight, you can gently stretch it for a better fit. Frequent breaks can also help reduce discomfort.

How do I clean my Logitech H150 headset?

Use a soft, slightly damp cloth to clean the headset. Avoid harsh chemicals. For the ear pads, you can wipe them with a dry cloth or a bit of isopropyl alcohol.

The headset does not work on my device, what should I do?

Test the headset on another device to check if it works. If not, it may be defective. Otherwise, check your device's audio settings to ensure they are properly configured.

Can I use the Logitech H150 with a smartphone?

Yes, the Logitech H150 headset can be used with a smartphone if it has a 3.5 mm audio jack. Make sure the microphone is supported by your device.

The headset is under warranty, how can I make a claim?

To make a warranty claim, contact Logitech customer support with your proof of purchase. They will guide you through the return or exchange process.

USER MANUAL H150 LOGITECH

Contents4 English Getting started with

6. Headphone plug (green)

1. Insert the 3.5 mm headphone plug (green)

into the headphone jack on your computer.

2. Insert the 3.5 mm microphone plug (pink)

into the microphone jack on your computer.

Connect the headset6 English Getting started with 2English 7 Logitech® Stereo Headset H150

• Check both the headphone and microphone cable connections between the headset and your computer. The 3.5 mm headphone plug (green) connects to the headphone jack on your computer, and the 3.5 mm microphone plug (pink) connects to the microphone jack.

• Adjust the volume and microphone settings to an audible level in the application and operating system.

• Try restarting the media application.

• Close all media applications and check whether your computer soundcard has been selected in your Windows operating system for playback and voice. Windows XP: Go to Start/Control Panel/ Sounds and Audio Devices/Audio tab. Choose your sound card and click OK. Go to the Voice tab, select your sound card, and click OK. Restart your media application. Windows Vista and Windows 7: Go to Start/Control Panel/Sounds/ Playback Devices tab. Choose your sound card and click OK. Go to the Recording devices tab, choose your sound card, and click OK. Restart the media application. For additional assistance, please visit www.logitech.com/support. Help with setup: headset not working?8 Deutsch Erste Schritte