BDBB214 - Lighting BLACK & DECKER - Free user manual and instructions

Frequently Asked Questions - BDBB214 BLACK & DECKER

USER MANUAL BDBB214 BLACK & DECKER

Your Black & Decker mini light bar has been designed for providing illumination for DIY projects and leisure use. This product is intended for consumer use only.

Safety instructions

Warning! When using battery-powered appliances, basic safety precautions, including the following, should always be followed to reduce the risk of fire, leaking batteries, personal injury and material damage.

Read all of this manual carefully before using the appliance.
The intended use is described in this manual. The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury.
Retain this manual for future reference.

Using your appliance

Always take care when using the appliance.

Do not immerse the appliance in water.
Do not open body casing. There are no user-serviceable parts inside.
Do not operate the appliance in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
To reduce the risk of damage to plugs and cords never pull the cable to remove the plug from a socket.

Safety of others

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for the their safety.
Children should be supervised to ensure that they do not play with the appliance.

After use

• When not in use, the appliance should be stored in a dry, well ventilated place out of the reach of children.
  Children should not have access to stored appliances.
• When the appliance is stored or transported in a vehicle it should be placed in the boot or restrained to prevent movement following sudden changes in speed or direction.
  The appliance should be protected from direct sunlight, heat and moisture.

Inspection and repairs

Before use, check the appliance for damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.
Do not use the appliance if any part is damaged or defective.
- Have any damaged or defective parts repaired or replaced by an authorised repair agent.
- Never attempt to remove or replace any parts other than those specified in this manual.

Specific safety instructions for light bars

Inspect the lens for damage following impact or if the light bar is dropped. Do not operate without the lens in place or with a damaged lens.
- Never look directly into the light or shine the light into another person's eyes.
Do not immerse light bar in water.

Additional safety instructions for non-rechargeable batteries

Warning! Batteries can explode, or leak, and can cause injury or fire. To reduce this risk:

Make sure that the on/off switch is in the off position before inserting the battery(s). Inserting batteries into power tools and appliances that have the switch on invites accidents.
Under abusive conditions, liquid may be ejected from the battery, avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Carefully follow all instructions and warnings on the battery label and package.
Always insert batteries correctly with regard to polarity (+ and -) , marked on the battery and the equipment.
Do not short battery terminals.
Do not charge batteries.
Do not mix old and new batteries. Replace all of them at the same time with new batteries of the same brand and type.
Keep batteries out of the reach of children.
Remove batteries if the device will not be used for several months.
- Never attempt to open for any reason.
Do not store in locations where the temperature may exceed 40^
When disposing of batteries, follow the instructions given in the section "Protecting the environment".
Do not incinerate the batteries.
Do not expose the batteries to water.

Features

1. Flexible hook
2. LED light bar
3. On/off button
4. Battery compartment cover

Assembly

Installing the batteries (fig. A)

Warning! Use AA size (LR06) alkaline batteries only.

Turn the light bar upside down to get access to the battery compartment cover (4).
Unscrew the battery compartment cover (4) counterclockwise and remove it.
Insert three new AA (LR06) alkaline batteries (5), make sure to match the (+) positive and the (-) negative terminals correctly.
Locate the cover (4) into the base of the light bar. It will only fit one way, do not force it.
To secure the cover (4) to the battery compartment, screw it clockwise to lock it into position.

Use

To turn the light bar on, press the on/off button (3).
To turn the light bar off, press the on/off button (3) again.

Using the flexible hook (fig. B and C)

The flexible hook (1) may be used to store, support or suspend the light bar. The flexible hook allows the light bar (2) to be set to in any position (fig. B). Make sure that the flexible hook is secure around the supporting object.

Maintenance

Your Black & Decker corded/cordless appliance/tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper appliance/ tool care and regular cleaning.

Warning! Before performing any maintenance on corded/ cordless appliances/tools.

Switch off and unplug the appliance/tool.
Or switch off and remove the battery from the appliance/ tool if the appliance/tool has a separate battery pack
Or run the battery down completely if it is integral and then switch off.
Unplug the charger before cleaning it. Your charger does not require any maintenance apart from regular cleaning.

Regularly clean the ventilation slots in your appliance/ tool/charger using a soft brush or dry cloth.
Regularly clean the housing using a damp cloth. Do not use any abrasive or solvent-based cleaner.

Warning! Regularly open the chuck and tap it to remove any dust from the interior (if applicable).

Protecting the environment

Separate collection. This product must not be disposed of with normal household waste.

Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection.

Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.

Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product. Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.

You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com.

Batteries

At the end of their useful life, discard batteries with due care for our environment:

Do not short-circuit the battery terminals.
Do not dispose of the battery(s) in fire, as this may result in a risk of personal injury or an explosion.
Run the battery down completely, then remove it from the appliance/tool.
- Batteries are recyclable. Place the battery in suitable packaging to ensure that the terminals cannot be short-circuited.
Take them to any authorised repair agent or a local recycling station.

Technical data

BDBB214

Input voltage Vdc 4.5

Battery size type 3 x LR06 (AA)

Weight kg 0.36

EC declaration of conformity

BDBB214 H1

Black & Decker declares that these products conform to:

Standards & Legislation.

EN60598

The undersigned is responsible for compilation of the technical file and makes this declaration on behalf of Black & Decker

Kevin Hewitt

Director of Consumer Engineering

Spennymoor, County Durham, DL16 6JG

United Kingdom

29-05-2009

Guarantee

Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.

If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Black & Decker guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to make sure of the minimum inconvenience to the customer unless:

The product has been used for trade, professional or hire purposes.
The product has been subjected to misuse or neglect.
The product has sustained damage through foreign objects, substances or accidents.
Repairs have been attempted by persons other than authorised repair agents or Black & Decker service staff.

To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com.

Please visit our website www.blackanddecker.co.uk to register your new Black & Decker product and to be kept up to date on new products and special offers. Further information on the Black & Decker brand and our range of products is available at www.blackanddecker.co.uk.

Director of Consumer Engineering

Spennymoor, County Durham, DL16 6JG

Großbritannien

29.05.2009

Garantie

Piles type 3 x LR06 (AA)

Poids kg 0,36

Spennymoor, County Durham, DL16 6JG

Royaume-Uni

29-05-2009

Garantie

Spennymoor, County Durham, DL16 6JG

Regno Unito

29-05-2009

Garanzia

(European Free Trade Area).

Director of Consumer Engineering

Spennymoor, County Durham DL16 6JG

Verenigd Koninkrijk

29-05-2009

Garantie

Spennymoor, County Durham, DL16 6JG

Reino Unido

29-05-2009

Garantía

Instalar as pilhas (fig. A)

Director de Engenharia de Consumo Spennymoor, County Durham, DL16 6JG

Director of Consumer Engineering

Spennymoor, County Durham, DL16 6JG

Storbritannien

29-05-2009

Garanti

Spennymoor, County Durham, DL16 6JG

Storbritannia

29.5.2009

Garanti

Black & Decker er trygg på kvaliteten på sineprodukter og tilbyr en enestående garanti. Denne garantierklæringenkommen i tillegg til dine lovbestemte rettigheter, og eriks i konflikt med disse. Garantien er gyldig i EU- og EFTA-medlemsstatene.

Director of Consumer Engineering Spennymoor, County Durham, DL16 6JG Storbritannien 29-05-2009

Garanti

Director of Consumer Engineering

Spennymoor, County Durham, DL16 6JG

Iso-Britannia

29.5.2009

Takuu

Do not forget to register your product!

www.blackanddecker.co.uk/productregistration

Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.

DEUTSCH

www.blackanddecker.pt/productregistration