BSGL53192 - Aspirateur BOSCH - Free user manual and instructions

USER MANUAL BSGL53192 BOSCH

Please keep this instruction manual. When passing the vacuum cleaner on to a third party, please also pass on this instruction manual. Intended use This appliance is intended for domestic use only. This appliance is intended for use up to a maximum height of 2000 metres above sea level. Only use this vacuum clean- er in accordance with the instructions in this instruction manual. In order to prevent injuries and damage, the vacuum cleaner must not be used for: Vacuum-cleaning persons or animals Vacuuming up: - hazardous, sharp-edged, hot or glowing substances. - damp or liquid substances. - highly flammable or explosive substances and gases. - ash, soot from tiled stoves and central heating systems. - toner dust from printers and copiers. Spare parts, accessories, dust bags Our original spare parts, original (special) accessories and original dust bags are designed to work with the features and requirements of our vacuum cleaners. We therefore recommend that you only use our original spare parts, original (special) accessories and original dust bags. This will ensure that your vacuum cleaner has a long service life and that the quality of its cleaning performance will remain consistently high throughout. !Please note Using unsuitable or inferior-quality spare parts, (special) accessories and dust bags can damage your vacuum cleaner. Damage caused by the use of such products is not covered by our guarantee. Safety information This vacuum cleaner complies with the recognised rules of technology and the relevant safety regulations. The appliance may be used by children over the age of 8 years and by persons with reduced physical, sensory or mental capacity or by persons with a lack of experience or knowledge if they are super- vised or have been instructed on the safe use of the appli- ance and the have under- stood the potential dangers of using the appliance. Children must never play with the appliance. Cleaning and user mainte- nance must never be carried out by children without super- vision. Plastic bags and films must be kept out of the reach of children before disposal. => Risk of suffocation. Proper use Only connect and use the vacuum cleaner in accordance with the specifications on the rating plate. Never vacuum without the dust bag or dust container, motor protection or exhaust filter. => This may damage the vacuum cleaner. Always keep the vacuum cleaner away from your head when using nozzles and tubes. => This could cause injury! When vacuuming stairs, the appliance must always be positioned below the user. Do not use the power cord or the hose to carry or transport the vacuum cleaner. For safety reasons, if this appliance's mains power cable becomes damaged, it must be replaced by the manufacturer, their after-sales service department or a similarlyqualified person. If using the appliance for longer than 30 minutes, pull out the power cord completely. When disconnecting the appliance from the mains, pull on the plug itself to remove it; do not pull on the power cord. Do not pull the power cord over sharp edges or allow it to be-come trapped. When the cable is being automatically rewound, ensure that the mains plug is not thrown towards persons, body parts, animals or objects. => Use the mains plug to guide the power cord. Pull out the mains plug before carrying out any work on the vacuum cleaner. Do not operate the vacuum cleaner if it is damaged. Unplug the appliance from the mains if a fault is detected.5 For safety reasons, only authorised after-sales service personnel are permitted to carry out repairs and fit replacement parts to the vacuum cleaner. Protect the vacuum cleaner from the weather, moisture and sources of heat. Do not pour flammable substances or substances containing alcohol onto the filters (dust bag, motor protection filter, exhaust filter, etc.). The vacuum cleaner is not suitable for use on construction sites. => Vacuuming up building rubble could damage the appliance. When not in use, switch off the appliance and pull out the mains plug. At the end of its life, the appliance should immediately be rendered unusable, then disposed of in an appropriate manner. !Please note The mains socket must be protected by at least a 16 amp circuit breaker. If a circuit breaker is tripped when you switch on the vacuum cleaner, this may be because other electrical appliances which have a high current draw are connected to the same power circuit. To prevent the circuit breaker from tripping, select the lowest power setting before switching the appliance on, and increase the power only once it is running. Disposal information Packaging The packaging is designed to protect the vacuum cleaner from being damaged during transportation. It is made of environmentally friendly materials and can therefore be recycled. Dispose of packaging that is no longer required at an appropriate recycling point. Old appliance Old appliances still contain many valuable materials. Therefore, please take appliances that have reached the end of their service life to your retailer or recycling centre so that they can be recycled. For current disposal methods, please enquire at a retailer or your local council. Disposal of filters and dust bags Filters and dust bags are manufactured from environmentally friendly materials. Provided they do not contain substances that are not permitted in household waste, you can dispose of them with your normal household waste. Notes on the energy label This vacuum cleaner is a general purpose vacuum cleaner with a primary hose. To achieve the energy efficiency rating and cleaning effectiveness rating on carpets, please use the interchangeable universal nozzle. To achieve the energy efficiency rating and cleaning effectiveness rating on hard floors with gaps and cracks, please use the supplied hard-floor nozzle without the clip-in edge cleaning bristles. These calculations are based on the Commission Delegated Regulation (EU) No. 665/2013 of 3rd May 2013 supplementing Directive 2010/30/EU. Unless otherwise stated, all the procedures referred to in these instructions were carried out in accordance with the EN 60312-1:2017* standard. *As the motor service test is carried out with the dust collector empty, the stated motor service life must be increased by 10% for tests with the dust collector half filled.Conservez cette notice d'utilisation. Si vous remettez l'aspirateur à une tierce personne, veuillez-y joindre sa notice d'utilisation. Utilisation conforme aux prescriptions et à l'emploi prévu

&-00.3,2*!22*,"* 1()- /%#*22*(,"*0+4- 3 $3"'3

B% @ ;GF "F) " . GA " EA ?AD" C"6 @G #

;GF #GA " B 7% ?AD" C"6 @G

"F? B 7% ?AD" C"6 @G " " A? D ;?1<"F% $% "

" GA 9" F" # G G% F " #F" # A "

. F' ? @G?+ @ @ " #G? H G7G >F F 9" F"

@ F ,%F GA B% # " EA F @ " #G? . F' >A 3< "6 "-A @F "F # ;9 " B% G%I D &F" F D C%G . G" CA "F @ F $"% # @ A <=.7 ", FF

(G' "F) " . GAA B 7% @ # B% " "F) "

F" @G . GG?A " F " B 7% " @ "G"

% ?AD" C"6 @G " " A? D ;?1<"F% $% " . GD ""9 " " B"E

Congratulations on your purchase of a Bosch vacuum cleaner from the GL50 product series. This instruction manual describes various GL50 models, which means that some of the equipment features and functions described may not apply to your model. You should only use original Bosch accessories, which have been specially developed for your vacuum cleaner, to achieve the best possible vacuuming results. Fold out the picture pages. Your vacuum cleaner 1 Adjustable floor tool with locking collar* 2 Hard-floor tool with locking collar* 3 Telescopic tube with adjusting sleeve (and locking collar)* 4 Handle 5 Flexible hose* 6 Dust bag change indicator* 7 ON/OFF button 8 Parking aid 9 Power cord 10 Exhaust grille (corresponds to one of the two variants shown)* 11 Upholstery nozzle* 12 Crevice nozzle* 13 Accessories compartment 14 Dust bag 15 Motor protection filter, washable* 16 Exhaust filter* 17 Storage aid (on underside of unit) 18 Carrying handle 19 Dust bag compartment lid 20 “Animal”* turbo nozzle 21 Pet hair upholstery tool* Replacement parts and special accessories A Replacement filter pack To get the most out of your appliance, we recommend using G ALL genuine replacement bags. Contents: - 4 dust bags with fasteners - 1 micro-hygiene filter

PLEASE NOTE We therefore recommend that you only use our ori- ginal dust bags. Your appliance is a highly efficient vacuum cleaner that achieves excellent cleaning results when used with high-quality dust bags. Only by using high-quality dust bags (such as Bosch original dust bags) can you ensure that your vacuum cleaner is working at the energy efficiency class, dust pick-up rate and dust retention capacity listed on its EU energy label. The use of inferior-quality dust bags (e.g. paper bags) can have a negative effect on the service life and performance of your appliance. Using unsuitable or inferior-quality dust bags can also damage your vacuum cleaner. Such damage is not covered by our guarantee. You can find more information about this at www.bosch-home.com/dust-bag . You can order our original vacuum cleaner bags here. B Hepa filter BBZ154HF Additional filter for cleaner exhaust air. Recommended for allergy sufferers. Replace once a year. C Hard floor tool BBZ123HD For vacuuming hard floors (parquet, tiles, terracotta, etc.) D Bionic filter BBZ11BF Combats unpleasant odours over a long period Please replace the filter once it begins to lose its effect (after approx. 1 year) Ordering code: 468637 Before using for the first time Figure ● Push the handle onto the flexible tube and until it engages. Figure ● Open the accessories compartment. ● Insert the crevice nozzle and upholstery nozzle in the accessories compartment in the appliance lid. ● Close the accessories compartment. Figure ● Open the dust bag compartment lid. Figure ● Remove the motor protection filter from the appliance. ● Place the Bionic filter onto the motor protection filter. ● Push the filters into the appliance and close the dust bag compartment lid.

21Figure Adjusting the floor tool: Rugs and carpets => Hard floors => Figure ● Remove the crevice nozzle or upholstery nozzle from the accessories compartment in the appliance lid. Figure Vacuuming with accessories Attach the nozzles to the suction pipe or handle as required: a)Crevice nozzle for vacuuming crevices and corners, etc. b)Upholstery nozzle for vacuuming upholstered furniture, curtains, etc. c)Hard-floor tool - with clip-in edge cleaning bristles: For gentle but effective cleaning of hard floor coverings (tiles, parquet, etc.) - without edge cleaning bristles: For cleaning dirt in gaps and cracks ● The edge cleaning bristles can be removed by pushing the two catches in the direction of the arrows. Figure Professional upholstery nozzle ● For intensive cleaning of upholstered furniture (attach to the handle or suction pipe, depending on requirements). ● To clean the professional upholstery nozzle, simply vacuum it using the handle. Figure ● After use, place the crevice or upholstery nozzle back into the accessories compartment in the appliance lid. Figure ● You can use the parking aid on the back of the appliance if you wish to stop vacuuming for a short time. ● Once you have switched off the appliance, slide the hook on the floor tool into the recess on the rear of the appliance. Figure To overcome obstacles, e.g. steps, the appliance can also be carried by the handle on the appliance body. When the work is done Figure ● Pull out the mains plug. ● Tug the power cord briefly and then let go (the power cord retracts automatically). Figure ● To store or transport the appliance, you can use the storage aid on the underside of the appliance. ● Stand the appliance up on its end. Slide the catch on the floor tool into the groove on the underside of the appliance.

Initial use Figure a)Push the flexible hose connecting piece into the air intake opening in the vacuum cleaner lid until it engages. b)To remove the flexible hose, press the two locking catches together and pull out the hose. Figure ● Push the handle into the telescopic tube until it locks in place. ● To release the connection, press the locking collar and pull out the telescopic tube. Figure ● Push the telescopic tube into the connecting piece on the floor tool until it locks in place. ● To release the connection, press the locking collar and pull out the telescopic tube. Figure ● Move the sliding sleeve in the direction of the arrow to release the telescopic tube and adjust it to the length required. Figure ● Holding the power cord by the plug, pull out to the required length and insert the plug into the mains socket. Figure Switching on/off ● To switch the vacuum cleaner on or off, press the ON/OFF button. Figure Controlling the suction level The required suction level can be set to the level required by turning the control knob in the direction of the arrow. Low power range => For vacuuming delicate materials, e.g curtains. Medium power range => For the daily vacuuming of light dirt deposits. High power range => For vacuuming durable floor coverings, hard floors and heavy deposits of dirt. Vacuuming

Please note: Depending on the type of hard floor involved (e.g. rough rustic tiles), floor tools are subject to a certain amount of wear. Therefore, you must check the underside of the floor tool at regular intervals. Worn undersides of floor tools may have sharp edges that can damage sensitive hard floors, such as parquet or linoleum. The manufacturer does not accept any responsibility for damage caused by worn floor tools.

Dependent on model Changing the filter

Please note: Always switch off the appliance before changing the filter. Replacing the bag Figure ● If the dust bag change indicator in the lid is filled completely when the floor tool is lifted from the floor with the highest suction level selected, the dust bag must be changed, even though it may not yet be full. Even if the dust bag is not full, it may still need changing, due to the type of dust which has been vacuumed. First check that the nozzle, suction pipe and flexible hose are not blocked, as this would also lead to the dust bag change indicator being triggered. Figure Opening the lid ● Open the lid by moving the locking lever in the direction of the arrow. Figure a) Seal the dust bag by pulling the sealing plate, and remove the bag. b)Slide the new dust bag into the holder up to the stop.

Please note: the lid will only close if a dust bag has been inserted. Cleaning the motor protection filter The motor protection filter should be cleaned regularly by tapping out the dirt and rinsing. Figure ● Open the dust bag compartment lid. Figure ● Remove the motor protection filter from the appliance in the direction of the arrow. ● Disconnect the motor protection filter from the Bionic filter.* ● Clean the motor protection filter by tapping out the dirt. ● If it is very dirty, the motor protection filter should be rinsed. The filter must then be left to dry for at least 24 hours.

Please note: the Bionic filter must not come into contact with water, as this will adversely affect the correct operation of the filter. ● After cleaning, place the Bionic filter onto the motor protection filter as necessary and push both filters into the appliance. ● Close the dust bag compartment lid. Replacing the Bionic filter If your appliance is equipped with a Bionic filter, it should be replaced once it begins to lose its effect (after approx. 1 year). Figure ● Open the dust bag compartment lid. Figure ● Remove the motor protection filter together with the Bionic filter from the appliance. ● Remove the old Bionic filter from the motor protection filter and dispose of it. ● Place the Bionic filter onto the motor protection filter. ● Push the filters into the appliance and close the dust bag compartment lid. 20*

● The motor protection filter must also be inserted into the appliance if you no longer wish to use the Bionic filter Replacing the exhaust filter Replacing the micro-hygiene filter This should be replaced with every replacement filter pack. Figure ● Open the dust bag compartment lid. Figure ● Release the filter holder by turning the locking lever in the direction of the arrow. ● Remove the micro-hygiene filter. Insert the new micro- hygiene filter into the appliance. ● Insert the filter holder in the appliance and lock it in place. Cleaning the Hepa* exhaust filter The Hepa* filter is designed so that it does not need to be replaced, provided the appliance is used as intended in the household. To ensure that the vacuum cleaner is working at its optimum power level, the Hepa* filter should be rinsed out after one year. The filtering action of the filter remains intact, even if the filter surface becomes discoloured. Figure ● Open the dust bag compartment lid. Figure ● Unlock the Hepa* filter by moving the locking tab in the direction of the arrow, and remove it from the appliance. ● Tap out the filter unit and rinse it under running water. Alternatively, the unit can be cleaned in a washing machine at max. 30 °C using a gentle programme and the lowest spin speed. TIP: To protect other laundry items, put the filter unit into a laundry bag. ● Once the Hepa* filter has dried completely (at least 24 hours), insert it back into the appliance and lock it in place. ● Close the rear flap. After vacuuming fine dust particles (e.g. gypsum, cement, etc.), clean the motor protection filter by tapping it out or, if necessary, replace the motor protection filter and exhaust filter. Care Always switch off the vacuum cleaner and disconnect it from the mains before cleaning the vacuum cleaner. The vacuum cleaner and plastic accessories can be cleaned with a commercial plastic cleaner.

Do not use abrasive agents, glass or all-purpose cleaning products. Never immerse the vacuum cleaner in water. If necessary, the dust compartment can be cleaned with a second vacuum cleaner or simply wiped with a dry cloth or dusting brush. Subject to technical modifications.

(,N +,= /C! +( )M E Bionic ,"AN; :)NMCE H$L!

.4ld 8 6 !c* ]8j[ fLU/_

.4k4d! 6 !c* ]8j[ fLU/_

7. .4ld 8 6 W7 i6* f<l fLU/_ =j63

P.O. Box 90449 (9:>9:= 1:A

0&.#A:8HFD9DBTGH>8DG