Big Wheeler 565 SpeedI - Lawn mower Güde - Free user manual and instructions
Find the device manual for free Big Wheeler 565 SpeedI Güde in PDF.
| Product type | Petrol lawn mower |
| Brand | Güde |
| Model | Big Wheeler 565 SpeedI |
| Order number | 95354 |
| Engine | 4-stroke OHV, 196 cm³, 3.5 kW (4.8 PS) |
| Rated speed | 2900 min⁻¹ |
| Cutting width | 550 mm |
| Cutting depth | 25-75 mm (adjustable) |
| Grass catcher volume | 65 L |
| Fuel tank volume | 1.3 L |
| Fuel | Unleaded premium petrol (E10) |
| Weight | 33.5 kg |
| Sound pressure level LpA | 84.7 dB(A) (uncertainty K=3 dB) |
| Measured sound power level LwA | 96.95 dB(A) (uncertainty K=1.5 dB) |
| Guaranteed sound power level | 98 dB(A) |
| Vibration emission value | 8.9 m/s² (uncertainty K=1.5 m/s²) |
| Hearing protection | Recommended |
| Warranty (consumer) | 24 months |
| Warranty (industrial use) | 12 months |
| Intended use | Mowing private lawns, max slope 20° |
| Safety | Emergency stop, rotary blade, protective covers |
| Maintenance | Oil change, air filter, spark plug |
Frequently Asked Questions - Big Wheeler 565 SpeedI Güde
User questions about Big Wheeler 565 SpeedI Güde
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Lawn mower in PDF format for free! Find your manual Big Wheeler 565 SpeedI - Güde and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Big Wheeler 565 SpeedI by Güde.
USER MANUAL Big Wheeler 565 SpeedI Güde
ENGLISH Please read the instructions carefully before starting the machine.
Art.No 95354 Contents. 196 cm3 Power, OHV 4-stroke motor. 3,5 kW (4,8 PS) Rated speed. 2900 min Cutting width. 550 mm Cutting depth. 25 - 75 mm Collection bag capacity.. 651 Fuel tank capacity. 1,3
Super/Unleaded petrol/E10
Weight 33,5 kg
Noise and Vibration Information
Sound pressure level LPA 1) .84,7 dB (A) Measured sound power level LWA21 96,95 dB (A) Guaranteed sound power level LWA 98 dB (A)
Wear ear protectors!
Vibration emission value a3) 8,9 m/3
1 Uncertainty K = 3 dB (A), 2 Uncertainty K = 1,5 dB (A), 3 Uncertainty K = 1,5m / s2
WARNING The vibration emission level will vary because of the ways in which a power tool can be used and may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when it is running but not actually in use. This may significantly reduce the vibratory load over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.
Read and understand the operating instructions before using the appliance. Familiarise with the
Control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties.
The operator is responsible for accidents or risks to third parties.
In case of any doubts about connection and operation, please refer to our customer center.
This appliance is not intended for use by children.
The machine may not be used by persons with reduced physical, sensory or mental capabilities or persons with a lack of knowledge or experience unless they are supervised by a person responsible.
Children must be supervised in order not to play with the machine.
Specified Conditions Of Use
The mower has been designed for cutting grass and grass areas with a maximum climb of 20 degrees in private gardens around the house and in garden colonies.
Due to the physical danger to the user and other persons, the lawn mower may not be used for other purposes.
Do not use this product in any other way as stated for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.
Use the appliance only outside, never use it in confined and badly ventilated areas. The mower must not be used for cutting bushes, hedges and thickets, for cutting and mulching creepers or lawns on roofs or in balcony boxes. The mower must also not be used as a crusher for mulching tree cuttings and hedges or levelling any terrain roughness.
Requirements for operating staff
Never let children work with the appliance. Never let adults work with the appliance unless they have been properly trained.
The operating staff must carefully read the Operating Instructions before using the appliance.
Qualification: Apart from the detailed instructions by a professional, no special qualification is necessary for appliance using.
Minimum age: Persons over 18 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under supervision of the trainer during occupational education.
Local regulations may stipulate the minimum age of the user.
Training: Using the appliance only requires corresponding training by a professional or the Operating Instructions. No special training is necessary.
Residual risks
Rotating blades may lead to serious injuries by cutting or amputating parts of the body.
Never touch under the housing body when the engine is running. Wear protective shoes. Never remove the collection bag when the machine is being operated.
Thrown-off stones or soil may lead to injuries.
Before mowing, check the area to be mowed for any undesirable objects. Make sure the collection bag is properly suspended. Wear safety goggles when working.
Poor lighting/light conditions represent a high safety risk.
Provide adequate lighting or good lighting conditions when working with the machine.
Emergency procedure
Danger of injury!
Never put your hands and feet near the rotating parts. Keep a distance from the ejection opening at all times.
Danger of burns!
Some parts of the appliance get too hot when the appliance is operated. Do not touch any hot parts, e.g. engine and muffler.
Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. For the sake of eventual accident, in accordance with DIN 13164, a workplace has to be fitted with a first-aid kit. It is essential to replace any used material in the first-aid kit immediately after it has been used. If you seek help, state the following pieces of information:
- Accident site
- Accident type
- Number of injured persons
- Injury type(s)
Symbols
Caution!
Read the Operating Instructions
Switch the engine off and remove the socket plug before any work on the engine.
Caution! Blades run down. Wait until all rotating parts have stopped.
Warning! The blade is sharp! Keep a sufficient distance from the mower when being operated.
Caution, risk of drawing-in
Risk of explosion
Refuel the engine only when switched off.
Risk of poisoning!
Use the appliance only outside, never use it in confined and poorly ventilated areas.
No smoking and no open flames.
Do not touch inside.
Always keep children and unauthorized persons away from the appliance.
Do not expose the appliance to rain and do not use it in wet or damp conditions.
Do not expose the appliance to rain and do not use it in wet or damp conditions.
Wear eye protection! Wear ear protection!
Safety gloves must be worn!
Wear safety shoes with slip-resistant soles and steel toe caps!
Caution - hot surface! Risk of burns!
Warning against thrown objects
Warning against hand injuries
Keep bystanders at a safe distance from the appliance (at least 5m)
Warning against dangerous electrical voltage
Protect against moisture
This side up
Safety Instructions
WARNING
Read all safety warnings and all instructions, including those given in the accompanying brochure.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
Keep children and other persons including animals in a safe distance when using the appliance. Minimum safe distance is 5 m.
Wear personal protective equipment.
Wear solid shoes and long trousers. Never use the appliance when barefooted or in light sandals.
Wear protective gloves if necessary.
Use the appliance in broad daylight or in a well-lit environment.
Check carefully the terrain where the appliance is being used and remove any items that could get caught and be thrown away.
Avoid operating the equipment in wet grass, where feasible.
Fuel is highly flammable.
Keep the fuel in suitable containers only.
The appliance may only be refuelled outdoors and not near open fire or burning cigarettes.
Refuel before starting the appliance. If the engine is running or still hot, it must not be refuelled or the tank cover opened.
Make sure the fuel does not overflow. If the fuel overflows, the engine must not be started. Remove any dirt from the appliance and prevent any attempt at ignition until fuel fumes have evaporated.
Replace all fuel tank and container caps securely.
The engine must necessarily be filled with engine oil before being put into operation for the first time.
Check the oil level whenever the appliance is to be put into operation. Add engine oil if necessary.
Carry out a visual inspection before any use to make sure the appliance, especially the cutting tools, fastening parts and the entire cutting unit are not damaged.
Before using, always visually inspect to see that the blades, blade bolts and cutter assembly are not blunt, worn or damaged. Replace worn or damaged blades and bolts in sets to preserve balance; The protective equipment on the appliance is strictly prohibited to be disassembled, changed, used in conflict with the designation and it is prohibited to attach any protective equipment of other manufacturers. The appliance must not be used if damaged or safety equipment is defective. Replace any worn-out and damaged parts.
Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect.
Do not start the engine before your feet are in a safe distance from the cutting tools.
Do not incline the appliance when being started.
Do not start the appliance when you are standing in front of the ejection opening.
Walk! Never run!
Make sure your posture is safe, especially on slopes. Do not cut on too steep slopes. Be particularly careful when changing travelling direction on slopes.
Pay maximum attention when turning around and pulling the appliance to you.
Switch the mower off whenever carrying or inclining it or when being outside a grass area. Wait until all rotating parts have stopped.
If an undesirable item is encountered or the appliance starts vibrating, the appliance must be switched off and the socket plug removed. Check whether the appliance is not damaged. Repair any damage.
Switch the appliance immediately off after finishing your work.
Stop the engine and disconnect the spark plug wire, make sure that all moving parts have come to a complete stop and, where a key is fitted, remove the key:
- To release a blocked blade.
- Check the machine if working perfectly after catching an undesirable object. Repairs must be executed before putting the machine into operation again.
- To lift the machine or take it away.
- To flip the mower over or carry it (e.g. from lawn to lawn or across a road).
- Clean the mower or do any other works before checking the mower.
Do not store the appliance in enclosed places just after being switched off but let it cool down outdoors instead.
Never store the appliance with petrol in the tank inside a building where petrol fumes may potentially get in touch with open fire or sparks.
When the appliance is not going to be used for a long time, store it with an empty tank.
Replace any defective muffler.
Do not change the controlled engine setting and do not rev the engine up.
Disposal
Disposal notes are based on the icons placed on the machine or on its package.
Any damaged or disposed devices must be delivered to appropriate collection centres.
Batteries, oil, and similar substances must not enter the environment.
Transport packaging disposal
The packaging protects the machine against damage during transport. Packaging materials are usually chosen based on environmental aspects and waste treatment principles and are therefore recyclable. Returning the packaging into material circulation saves raw materials and reduces waste production. Parts of packagings (e.g. foils, styropor) can be dangerous for children.
Risk of suffocation!
Keep parts of the packagings out of reach of children and dispose them as soon as possible.
Maintenance
Rotating blade
Switch the engine off and remove the socket plug before any work on the engine. Wait until all rotating parts have stopped and the appliance has cooled down.
Keep the appliance, especially the tank and engine, clean at all times. Clean the ejection opening and cover at regular intervals.
Apply environment-friendly oil to all moving parts.
Check the collection bag at regular intervals for any wear and aging.
Refer all servicing to qualified service personnel.
Use only original accessories and original spare parts.
Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.
If the fuel tank has to be drained, this should be done outdoors.
At the end of the season it is necessary to add an additive to the fuel/propellant and mix it with the fuel. → 18
Guarantee
Warranty period of 12 months applies to commercial use and 24 months applies to private use and commences on the day of purchase of the device.
The guarantee solely covers inadequacies caused by material defect or manufacturing defect. Original payment voucher with the sales date needs to be submitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised use such as appliance overloading, use of violence, damage as a result of any unauthorised interference or caused by foreign items. Failing to follow the operating and assembly instructions and common wear are also not included in the guarantee.
Service
Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you and without needles bureaucracy at our web pages at www.guide.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label. Please enter it here for future reference:
Serial No.:
Art.No:
Year of production:
Tel.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guide.com
Inspection and maintenance plan
| Regular servicing period Before any start-up | After 1 month | After 3 months | After 6 months | After 12 months | After 24 months | |
| 5 Hours of operation | 25 Hours of operation | 50 Hours of operation | 100 Hours of operation | 250 Hours of operation | ||
| Engine oil (10W-40) | Inspection | ✓ | ||||
| Change | ✓ | |||||
| Air filter Inspection | ✓ | |||||
| Change | ✓ | |||||
| Spark plug Inspection | ✓ | |||||
| Clean | ||||||
| Change | ✓ | |||||
Provide appropriate servicing upon the earlier of the following: in the given month or after the specified hours of operation have expired.
Defect detection
| Defect | Cause | Measure |
| The motor does not start | Start-Stop lever has not been pressed Press the Start-Stop lever | |
| Primary pump has not been used Use the primary pump | ||
| Lack of fuel Add some fuel | ||
| Bowden cables are too long→23 | Adjust the Bowden cables using the coupling nut.→23 | |
| Wrong fuel, storing without petrol tank being drained | Drain the fuel tank and carburettor. Add fresh petrol. | |
| Sooted spark plug (carbon residues on electrodes), electrodes distance too big | Clean the spark plug, check the plug thermal value, possibly change the plug, set the electrodes distance to 0.6-0.7 mm | |
| The spark plug is wet from petrol (over-saturated engine). | Dry the spark plug out and refit it. | |
| Unsteady running, strong vibrations | Blade is damaged Replace the blade | |
| Blade is loose Check and tighten the blade clamping | ||
| Poor mowing/catching performance | Blade is blunt Have the blade sharpened or replaced | |
| Collection bag is blocked | Empty the collection bag →11 | |
| Mowing height adjustment not regulated | Adjust the mowing height →9 | |
| Grass is not collected blocked channel | Full collection bag | Clean the ejection channel |
| Too wet grass | Empty the collection bag | |
| Cut in dry weather | ||
Technical Specifications
Gasoline lawn mower Big Wheeler 565 Speed-I
Caution - hot surface!
Risk of burns!
Unleaded petrol/E10
Weight 33.5 kg
Measured sound power level 84.7 dB(A); measured sound pressure level 96.95 dB(A); guaranteed sound power level 98 dB(A)
Wear hearing protection!
Vibration emission value 8.9 m/s²
1) Uncertainty K = 3 dB(A), 2) Uncertainty K = 1.5 dB(A), 3) Uncertainty K = 1.5 m/s²
WARNING: The vibration emission value may vary depending on the use of the power tool and may be higher than the value specified in these instructions in some cases. The vibration value can be used for comparison of electric tools.
It is suitable for a preliminary assessment of vibration exposure.
The vibration exposure during actual use may differ from the total declared value depending on the ways in which the tool is used. It may be necessary to determine safety measures to protect the operator, based on an estimation of exposure in the actual conditions of use, taking into account all parts of the operating cycle, such as times when the tool is switched off and when it is running idle, in addition to the trigger time.
Please read the safety instructions carefully before servicing. For example: Technical
Maintenance of electrical tools, temperature rise, organization of work processes.
Use the device only after you have carefully read and understood the instructions for
servicing. Familiarize yourself with the control elements and the correct use of the device.
Keep all safety instructions for future reference. You are responsible for third parties.
Servicing or repairs by third parties are at your own risk.
If you have any doubts regarding the connection and servicing of the device, contact customer service.
Children must not play with the device.
The device must not be used by persons with reduced physical, sensory or mental capabilities or by persons lacking experience and knowledge, unless they are supervised and instructed by a responsible person.
Children must be supervised to ensure that they do not play with the device.
Intended use
The mower is intended for cutting grass or lawns with a maximum incline of 20° on the side slopes around the house and in garden plots.
For physical reasons, the grass mower must not be used for other purposes.
This device may only be used for its intended purpose as described. In case of non-compliance with the general safety instructions or misuse, the manufacturer cannot be held liable for any damage.
Use the device only outdoors, never in enclosed or poorly ventilated rooms. The mower must not be used for cutting shrubs, hedges, or bushes, for cutting and mulching leaves, or for leveling uneven ground.
Never leave the device running unattended. Never leave the device running without being properly trained for the job. Use of the device requires careful reading of the maintenance instructions.
Qualification: Detailed instruction from a specialist for the use of the device is not necessary; no special qualification is required.
Minimum age: The device may be operated by persons who have reached 18 years of age. Exceptions to the use of minors are allowed if this occurs during vocational training under the supervision of the instructor.
Local regulations may determine a minimum age for the user.
Training: The use of the device requires only proper instruction from a specialist, e.g., maintenance training. Special training is not necessary.
Residual risks
Rotating parts can cause serious injuries if handled improperly.
Never reach into the housing of the device while it is operating. Wear protective footwear. Never open the collection bag while the device is operating.
Open blades or moving parts can cause injuries.
Wear sturdy clothing, long trousers, and non-slip shoes. Make sure the bag is attached correctly. During operation, wear protective goggles.
Poor lighting/lighting conditions pose a high risk to safety.
During operation, ensure sufficient lighting, e.g., good lighting conditions.
Behavior in case of an accident
Danger of electric shock!
Never place your feet near the cutting area. Keep a safe distance from the discharge opening.
Danger of injury!
Some parts of the machine become hot during operation. Do not touch hot parts, e.g., the motor and the exhaust.
In case of an accident, provide appropriate first aid and call for medical help as quickly as possible. Keep the injured person away from other hazards and calm them down. For any potential accident at the workplace, there must be a first aid kit according to DIN 13164. Materials taken from the first aid kit must be replenished. If you need help, follow these guidelines:
- Type of accident
- First aid for the injured
- First aid
Symbols
Attention!
Read the maintenance instructions
Before working on the motor, switch off the motor and pull out the spark plug connector.
Attention! The blades are rotating! Wait until all rotating parts have come to a complete stop.
Warning! The blade is sharp! During work, keep a sufficient distance from the blade.
Attention, danger of electric shock
Danger of electric shock. Charge the motor only when it is switched off.
Danger! Use the device only outdoors, never in enclosed or poorly ventilated spaces.
It is forbidden to smoke while operating.
It is forbidden to eat or drink.
Keep children and unauthorized persons away from the device.
Do not expose to rain and do not use in wet or humid conditions.
Wear protective goggles! Wear hearing protection!
Use protective gloves!
Wear safety shoes with protection against cuts, thick soles, and slip-resistant tops!
Caution - hot surface!
Danger of injury!
Warning for open parts
Warning against injury to hands
Keep bystanders at a safe distance from the machine (min. 5 m)
Warning of dangerous electrical voltage
Warning
Safety Instructions
WARNING
Read the safety instructions and warnings in the attached brochure. Failure to follow the safety instructions and warnings may result in electric shock, fire, and/or serious injury. Keep all safety instructions and warnings for future use.
During operation of the device, keep children and other people and animals at a safe distance. The minimum safe distance is 5 m.
Wear protective goggles.
Wear sturdy shoes and long trousers. Never use the device barefoot or wearing sandals.
If necessary, wear protective gloves.
Use the device only in daylight or in well-lit conditions.
Carefully check the terrain on which you use the machine and remove all objects that could be caught up and thrown.
If possible, avoid using the product in wet grass.
The fuel is clearly flammable.
Store fuel only in approved containers.
The machine may only be started on a level surface, not in the vicinity of an open flame or flammable materials.
Start the machine before starting work. When the machine is in operation or is running, it must not be started or the fuel tank cap must not be opened.
Turn off the engine before refueling. If the engine is running, it must not be refueled. Remove the fuel cap from the tank and avoid any attempt to start the engine until the fuel cap is replaced.
Tighten all fuel tank caps and fuel tank caps again.
Before starting the engine for the first time, it must be filled with engine oil.
Before each start-up, check the oil level. Top up the engine oil if necessary.
Before use, perform a visual inspection to determine that the device is not damaged, especially the cutting tools, fastening parts, and the cutting unit.
Before use, perform a visual inspection to ensure that the blade, blade bolts, and cutting mechanism are not worn or damaged. Replace worn or damaged blades and bolts to maintain balance.
It is strictly forbidden to dismantle, modify, or use the cutting attachments in a way contrary to their intended purpose, or to attach cutting attachments from other manufacturers.
The device must not be used when it is damaged or the safety attachments are defective. Replace worn and damaged parts.
Do not work with the machine in an enclosed space, as dangerous gases may accumulate due to exhaust fumes.
The engine must be stopped when your feet are at a safe distance from the cutting tools.
Start the machine only when it is in a safe position.
Do not start the machine when standing in front of the discharge opening.
Caution! Do not touch!
Ensure a safe stance, especially on slopes. Do not work on excessively steep slopes. Be especially careful when changing the direction of travel on slopes.
Be extremely careful when pulling the machine towards you.
Never use the lawn mower in the presence of other people, especially children, or pets.
Stop the engine and wait until the cutting blade has completely stopped.
If you hit a foreign object or the machine starts to vibrate, you must switch it off and remove the spark plug cap. Check that the blade is not damaged. Repair any damage if necessary.
Switch off the machine before carrying out any work.
Stop the machine and remove the spark plug cap. Wait until all rotating parts have come to a complete stop, and the device has cooled down. Remove the key, if there is one.
To free a blocked blade, when you grasp the blade, check that the blade is not damaged. Before you put the device back into operation, the repair must be carried out. For lifting or transporting the blade so that you can move or transport it (e.g., from the grass or through it). - Before transporting the lawn mower, stop the engine.
Do not place the machine in a closed room immediately after switching it off; leave it to cool down first.
Never store the machine with petrol in the tank in a room where petrol vapors could come into contact with open flames or sparks.
For long-term storage, store the machine only with an empty fuel tank.
Replace defective spark plugs.
Do not change the factory settings of the engine and do not overrev the engine.
Lubrication
The warnings for disposal of the product are placed on the device, respectively on the packaging.
Defective or disposed devices must be handed over to the appropriate collection points.
Batteries, oil, and other similar substances must not be released into the environment.
Original transport packaging
The packaging protects the device from damage during transport. The packaging materials are usually selected according to ecological criteria for disposal and can therefore be recycled. Returning the packaging to the material cycle saves raw materials and reduces waste. Some parts of the packaging (e.g., foil, styropor) can be dangerous for children.
There is a risk of suffocation!
Keep parts of the packaging out of the reach of children and dispose of them as quickly as possible.
Maintenance
Turn off the device!
Before any work on the motor, switch off the motor and remove the spark plug connector. Wait until all rotating parts of the motor have come to a standstill.
Keep the machine, the main drive and the motor clean. Regularly empty the waste outlet and the duct.
Lubricate all moving parts with environmentally friendly oil.
Regularly check the collection container for wear and tear.
Have repairs carried out only by qualified specialist personnel.
Only use original accessories and original spare parts.
Only regular maintenance and care can ensure satisfactory operation. Insufficient maintenance and care can lead to unexpected incidents.
When the fuel tank needs to be emptied, this should be done outdoors.
In the carburetor season, it is necessary to add a fuel/oil additive and mix it with the fuel. →18
Warranty
The warranty period is 12 months for commercial use, 24 months for consumers and for resellers of the device.
The warranty covers exclusively defects in material or manufacturing defects. When used and advertised, the warranty period begins from the date of purchase as stated in the purchase document.
The warranty does not cover improper use, such as overloading the device, use with force, damage from improper cleaning or maintenance. Failure to follow the instructions for use and installation and normal operation are excluded from the warranty.
Service
Do you have technical questions? Complaints? Do you need spare parts or installation for maintenance? On our website www.guede.com in the Service section we will help you quickly and without unnecessary bureaucracy. Help us, please, so that we can help you. In order to identify your device and handle complaints, we need to know its serial number, product number and year of manufacture. All this data is on the type plate. To have them always at hand, please note them here.
Serial number
Product number:
Year of manufacture
Tel.: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guide.com
Maintenance and care plan
Translation of the EC-Declaration of Conformity
We, hereby declare the conception and construction of the below mentioned appliances correspond - at the type of construction being launched - to appropriate basic safety and hygienic requirements of EC Directives.
In case of any change to the appliance not discussed with us, the Declaration expires.
- NOISE AND VIBRATION INFORMATION
- WEAR EAR PROTECTORS
- SPECIFIED CONDITIONS OF USE
- REQUIREMENTS FOR OPERATING STAFF
- RESIDUAL RISKS
- POOR LIGHTING/LIGHT CONDITIONS REPRESENT A HIGH SAFETY RISK
- EMERGENCY PROCEDURE
- DANGER OF INJURY
- DANGER OF BURNS
- SYMBOLS
- SAFETY INSTRUCTIONS
- WARNING
- FUEL IS HIGHLY FLAMMABLE
- DISPOSAL
- TRANSPORT PACKAGING DISPOSAL
- RISK OF SUFFOCATION
- MAINTENANCE
- ROTATING BLADE
- GUARANTEE
- SERVICE
- TECHNICAL SPECIFICATIONS
- GASOLINE LAWN MOWER BIG WHEELER 565 SPEED-I
- WEAR HEARING PROTECTION
- INTENDED USE
- BEHAVIOR IN CASE OF AN ACCIDENT
- THE FUEL IS CLEARLY FLAMMABLE
- LUBRICATION
- ORIGINAL TRANSPORT PACKAGING
- THERE IS A RISK OF SUFFOCATION
- TURN OFF THE DEVICE
- WARRANTY
- MAINTENANCE AND CARE PLAN
- TRANSLATION OF THE EC-DECLARATION OF CONFORMITY
Brand : Güde
Model : Big Wheeler 565 SpeedI
Category : Lawn mower