AS 10 - Slicer TEAM - Free user manual and instructions
Find the device manual for free AS 10 TEAM in PDF.
| Product Type | Electric Slicer |
| Brand | Team |
| Model | AS 10 |
| Power Supply | Mains 220-240 V ~ 50 Hz |
| Power | 150 W (estimated) |
| Cutting Thickness | Adjustable from 0 to 15 mm |
| Knife Type | Circular stainless steel knife |
| Max. Cutting Capacity | Up to 15 mm thickness |
| Dimensions (approx.) | 35 x 25 x 20 cm |
| Weight (approx.) | 3 kg |
| Usage | Household (non-professional) |
| Max. Continuous Use Time | 5 minutes (check rating plate) |
| Mandatory Break | At least 10 minutes |
| Safety | Double switch with safety, carriage, pusher and thumb guard |
| Cleaning | Wipe with damp cloth; do not immerse; removable knife washable with soapy water |
| Lubrication | Recommended with food oil after cleaning |
| Included Parts | Carriage (3 pieces), pusher, thumb guard |
| Repairability | Contact a qualified approved service |
| Recommended Foods | Cheeses, boneless meats, bread, deli meats |
| Prohibited Foods | With bones, frozen, packaged, hard foods |
| Recycling | Do not dispose with household waste, follow WEEE directive (2002/96/EC) |
Frequently Asked Questions - AS 10 TEAM
User questions about AS 10 TEAM
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Slicer in PDF format for free! Find your manual AS 10 - TEAM and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AS 10 by TEAM.
USER MANUAL AS 10 TEAM
- Blade-locking knob
- Blade
- Safety switch
- On switch
- Slice thickness regulation
- Pusher
- Platform
- Table
- Thumb guard
F
MOUNTING OF THE PLATFORM
- Put the platform (7) in a vertical position in order to mount it correctly on the table (8).
- Put edge (B) under edge (A).
- Lift it up so that edge (B) is next to edge (A).
- Turn the platform down (horizontally) so that it is located on the table and can be moved easily. The platform should be secured in the table groove (C).
MONTAGE DU CHARIOT COULISSANT
Please read these instructions carefully before using the appliance.
Important: People (including children) who are not able to use the appliance in a safe way, due to their physical, sensorial or mental capacity or their lack of experience or knowledge, must never use the appliance except if they are supervised by a person responsible for their safety or if they previously received instructions concerning the safe use of the appliance. Close supervision is necessary to prevent children from using the appliance as a toy.
Check that your mains voltage corresponds to that stated on the appliance.
Never leave the appliance unsupervised when in use.
From time to time check the appliance for damages. Never use the appliance if cord or appliance shows any signs of damage. In that case, repairs should be made by a competent qualified electrician ^() . Should the cord be damaged, it must be replaced by a competent qualified service (^)
Only use the appliance for domestic purposes and in the way indicated in these instructions.
Never immerse the appliance in water or any other liquid for any reason whatsoever. Never place it into the dishwasher.
Before cleaning, always unplug the appliance from the power supply.
Never use the appliance near hot surfaces.
Never use the appliance outside and always place it in a dry environment.
Never use accessories that are not recommended by the producer. They could constitute a danger to the user and risk to damage the appliance.
Never move the appliance by pulling the cord. Make sure the cord cannot get caught in any way. Do not wind the cord around the appliance and do not bend it.
Make sure the appliance is set on a flat surface.
Unplug the appliance when not in use.
Only use this slicer for cooking applications. Only cut articles such as cheese, (boned) meat, bread and sausages. Never cut frozen food with this slicer.
Always use the platform and its pusher unless it is impossible because of the size and dimension of the article. Make sure never to touch the blade.
This kind of appliance cannot function continuously, it is not a professional type of appliance. It is necessary to make temporary stops. Check the section « Important information » in the instruction manual.
The blade of this appliance is extremely sharp, always be very careful when cleaning the appliance.
It is absolutely necessary to keep this appliance clean at all times as it comes into direct contact with food.
Make sure the appliance is unplugged when disassembling it before cleaning.
Never touch the blade when the appliance is in use. Furthermore, never try to stop the movement of the blade in any way whatsoever.
- Be careful never to remove the platform when the appliance is connected as it protects the user from the blade. Therefore never try to overstep the 0 and 15mm graduations.
Be careful, the platform (7) guiding the food is delivered in kit (3 parts). Before any use, it is absolutely necessary to make sure that the parts have been put together correctly and that no part is missing. Please see the pictures on page 2 and 4.
(*) Competent qualified electrician : after sales department of the producer or importer or any person who is qualified, approved and competent to perform this kind of repairs in order to avoid all danger. In any case you should return the appliance to this electrician.
IMPORTANT INFORMATION
This appliance is not for professional use. You should follow the requested breaks. Failure to follow this instruction carefully may result in damage to the motor. Please refer to the rating label for the maximum continuous usage time (KB xx min where xx is the maximum usage time). The breaks should last at least 10 minutes.
USING THE SLICER (see Page 4)
Clean all exterior parts of the appliance before the first use.
Make sure the appliance is on a steady surface and open the table (8).
- Put the platform (7) on top of the table. The platform should be secured in the table groove. Now add the pusher (6) and the thumb guard (9) as described on the picture.
- Select the slicing thickness by turning the adjusting knob (5). You can control millimetres on the side of the appliance.
- Plug in the appliance. The slicer is now ready for use.
- Lay the food to be sliced between the blade (2) and the pusher.
- First press the safety switch (3), then the on switch (4). The blade will start rotating. If you release the on switch first, the blade will stop rotating. On the contrary, if you release the safety switch first and afterwards the on switch, the appliance will operate continuously. You can deactivate the continuous operation by pressing the safety switch briefly. Please note that for safety reasons the appliance will only operate if both switches are pressed.
- Push the platform with the other hand to bring the food to the blade. As a safety measure, the platform cannot be moved easily. This means that the pressure has to be sufficiently strong in order to obtain regular slices.
To avoid food sticking to the appliance, you can moisten the blade with a wet towel beforehand. This also allows you to slice more easily.
Always use the pusher when slicing small parts and leftovers.
- Do not slice meat with bones, food with large seeds, rolled roast without removing the string, wrappers (i.e. aluminium foil), frozen food or any hard, inedible food parts.
CLEANING
Before cleaning, always unplug the appliance.
- Wipe the inside and outside of the appliance with a paper towel or a soft and damp cloth. It should not be washed in a dishwasher.
- Do not clean the inside or outside with any abrasive scouring pad or steel wool as this will damage the finish.
- Do not immerse in water or any other liquid.
- The blade can be taken off by turning the blade-locking knob (1) clockwise (e.g. with a coin of the suitable size). Caution: the blade is very sharp. Clean the blade with soapy water and give it a rinse. Then turn the knob anticlockwise to fasten it.
- Dry all parts well before storage.
PRACTICAL TIP
Lubricate the blade with cooking oil after each cleaning in order to protect it agains humidity. This way, the blade will not stick to the food during use.
PROTECTION OF THE ENVIRONMENT- DIRECTIVE 2002/96/EC
In order to preserve our environment and protect human health, the waste electrical and electronic equipment should be disposed of in accordance with specific rules with the
implication of both suppliers and users. For this reason, as indicated by the symbol the rating label or on the packaging, your appliance should not be disposed of as unsorted municipal waste. The user has the right to bring it to a municipal collection point performing waste recovery by means of reuse, recycling or use for other applications in accordance with the directive.
