CB 993 - Vacuum Cleaner BOMANN - Free user manual and instructions

USER MANUAL CB 993 BOMANN

• Read the operating instructions carefully before putting the appliance into ope- ration and keep the instructions including the warranty, the receipt and, if possi- ble, the box with the internal packing.

• The appliance is designed exclusively for private use and for the envisaged pur- pose. This appliance is not fit for commercial use. Do not use it outdoors (except if it is designed to be used outdoors). Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediate- ly. Do not put it in water.

• When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull on the plug, not the cable) if the appliance is not being used and remove the attached accessories.

• Do not operate the machine without supervision. If you should leave the work- place, always switch the machine off or remove the plug from the socket (pull the plug itself, not the lead).

• To protect children from the dangers posed by electrical appliances, make sure that the cable is hanging low and that children do not have access to the appli- ance.

• Check the appliance and the cable for damage on a regular basis. Do not use the appliance if it is damaged.

• Do not try to repair the appliance on your own. Always contact an authorized technician. To avoid the exposure to danger, always have a faulty cable be replaced only by the manufacturer, by our customer service or by a qualified person and with a cable of the same type.

• Use only original spare parts.

• Pay careful attention to the following “Special Safety Instructions“. Special Safety Instructions

• Do not suck up liquids!

• Do not suck up hot ashes or pointed or sharp objects!

• Do not use the appliance in humid rooms!

• Never use without the filter. Check that the filter is inserted correctly!

• hair, clothing and body parts away from the vacuum nozzle during use!

• Keep the vacuum cleaner away from sources of heat like radiators, ovens, etc.!

1. Insert the connection head of the suction hose (12) into the hose connection

(11) until its locks in place.

2. In order to release the hose again, press the two buttons on the side of the suc-

tion hose at the same time.

3. Keep the buttons pressed and then pull the hose out.

1. Attach the floor nozzle (16) or the accessory.

2. Unwind the length of cable (1) you require.

3. Insert the mains plug into a correctly installed safety socket (230 V, 50 Hz) and

then switch the machine on using the on/off switch (2).

4. Set the vacuum power with the vacuum power regulator (3).

5. Vacuum at a steady speed. There is no need to exert pressure.

6. Attention: pay attention to the range that can be covered with the cable length.

Accessory Compartment (6): The integrated accessories (crevice nozzle, upholstery/brush combination nozzle) can be found by pulling the lid (7) of the accessory compartment. Nozzle accessories: Crevice nozzle: For vacuuming in corners and crevices. Upholstery/brush combination nozzle: For cleaning upholstery, curtains etc. Floor nozzle: For cleaning carpets or smooth surfaces.

1 Cable 2 On/off switch 3 Vacuum power regulator 4 Carrying handle 5 Cable-winding key 6 Accessory compartment 7 Accessory compartment opener 8 Dust bag filling display 9 Dust bag compartment 10 Button for opening the dust bag compartment 11 Hose connection 12 Vacuum hose 13 Telescopic suction tube 14 Telescopic suction tube button 15 Hook on the suction tube 16 Floor nozzle 17 Parking assistance Accessories: Crevice nozzle Upholstery/brush combination nozzle 5....-05-BS 1231 04.03.2003 11:21 Uhr Seite 35Upholstery/Brush Combination Nozzle: Please note that the upholstery/brush nozzle is a "2 in 1" attachment. For uphol- stery please use the nozzle without the attachment. The brush attachment is hoo- ked under the upholstery novel. Releasing the accessories: Pull them apart while turning slightly. Vacuum power regulator (3): Low vacuum power: For curtains and delicate fabrics Medium vacuum power: For long-pile velour carpets and textile flooring High vacuum power: For sturdy rugs and floors Telescopic Suction Tube (13): As the length of the suction tube can be adjusted it can be adapted to your own personal height. Unlock the coupling by pressing the button (14) downwards. Then move the telescopic suction tube to the desired height. To fix the suction tube in position, pull it until it is heard to lock in place. Cable winding device: Pull out the cable (1) up to the maximum length indicated with the yellow mark. Never pull the cable out up to the red mark as the cable winding can be damaged. Said damages are not covered by the warranty. Winding: Press the cable (5) winding button and guide the cable. Hold the cable to avoid wrap- ping. Air Slide: Open the air slide on the hose handle in order to regulate the airflow or to clear any particles sticking to the nozzle. Dust bag replacement display (8): Hold the hose up into air. If the dust bag change display lights up, the bag is full. Please change it. Changing the dust bag: Pull the plug out of the socket. Press the button (10) to open the lid of the dust bag compartment (until its locks in place). Remove the dust bag holder and pull the dust bag out of the holder. Insert a new dust bag. Reinsert the dust bag holder. Close the cover so that it snaps into place.

5....-05-BS 1231 04.03.2003 11:21 Uhr Seite 36Filter: Your appliance has two filters. Motor protection filter (inlet filter): The inlet filter is located in the dust bag compartment. Press the button (10) to open the lid of the dust bag compartment. The filter is located vertically in the rear section of the dust housing. Remove the filter by pulling upwards. Clean the engine protec- tion filter after 10 dust bag changes. If necessary, the filter can also be washed in warm water without any additives. Place it back into place only once it is completely dry! Outlet filter

The appliance is also equipped with an outlet filter. It is located on the rear part of your appliance behind a ventilation grid. Open the ventilation grille by pressing the button above it.Then pull the grille out towards the front. Remove the filter and clean as described above. Fit the filter back into place and close the ventilation grid by fol- lowing the steps above in the opposite order. Cleaning and storage Cleaning

• Pull the plug out of the socket before cleaning!

• Clean the casing with a dry cloth. Storage

• Let the iron cool down completely.

• Wind the cable completely.

• Please place the machine in a vertical position and insert the hook (15) on the suction tube into the parking assistance (17) on the back. This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations. Subject to technical changes without prior notice! Guarantee The device supplied by our Company is covered by a 24 month guarantee starting on the date of purchase (receipt). During the life of the guarantee any fault of the device or its accessories *) ascriba- ble to material or manufacturing defects will be eliminated free of charge by repai- ring or, at our discretion, by replacing it. The guarantee services do not entail an extension of the life of the guarantee nor do they give rise to any right to a new guarantee!

5....-05-BS 1231 04.03.2003 11:21 Uhr Seite 37Proof of the guarantee is provided by the proof of purchase. Without proof of purchase no free replacement or repair will be carried out. If you wish to make a claim under the guarantee please return the entire machine in the original packaging to your dealer together with the receipt. *) Damage to accessories does not mean automatic free replacement of the whole machine. In such cases please contact our hotline. Broken glass or breakage of plastic parts are always subject to a charge. Defects to consumables or parts subject to wearing (e.g. motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc.) as well as cleaning, maintenance or the replacement of said parts are not covered by the guarantee and hence are to be paid! The guarantee lapses in case of unauthorized tampering. After the expiry of the guarantee After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs.