CB 613 - Iron BOMANN - Free user manual and instructions

USER MANUAL CB 613 BOMANN

White BOMANN® iron iron with control knob and placket (no visible text or symbols beyond brand name)

CB 613

CE

BOMANN®

Inhalt

Inhoud • Sommaire • Indice • Índice • Indice

Contents • Spis treści • Obsah • Tartalom • Continut • Содержание

General Safety Instructions

• Read the operating instructions carefully before putting the appliance into operation and keep the instructions including the warranty, the receipt and, if possible, the box with the internal packing.
• The appliance is designed exclusively for private use and for the envisaged purpose. This appliance is not fit for commercial use. Do not use it outdoors (except if it is designed to be used outdoors). Keep it away from sources of heat, direct sunlight, humidity (never dip it into any liquid) and sharp edges. Do not use the appliance with wet hands. If the appliance is humid or wet, unplug it immediately. Do not put it in water.
• When cleaning or putting it away, switch off the appliance and always pull out the plug from the socket (pull on the plug, not the cable) if the appliance is not being used and remove the attached accessories.
• Do not operate the machine without supervision. If you should leave the workplace, always switch the machine off or remove the plug from the socket (pull the plug itself, not the lead).
• To protect children from the dangers posed by electrical appliances, make sure that the cable is hanging low and that children do not have access to the appliance.
• Check the appliance and the cable for damage on a regular basis. Do not use the appliance if it is damaged.
• Do not try to repair the appliance on your own. Always contact an authorized technician. To avoid the exposure to danger, always have a faulty cable be replaced only by the manufacturer, by our customer service or by a qualified person and with a cable of the same type.
• Use only original spare parts.
• Pay careful attention to the following "Special Safety Instructions".

Special Safety Instructions

• WARNING! The ironing base becomes hot very quickly and takes a long time to cool down. Please do not touch it.
• When the iron is not in use it should be placed on its stand.
• Before filling the water tank remove the mains lead. Please fill the water tank with not more than one filling of the filling beaker.
• Let the iron cool down completely before you pack it away.
• When handing the travel iron over to other people please consign also the use instructions.
• Travelling irons are not intended for regular use.

First Use of the Machine

GB

Numbering of the Controls

1 Filling aperture for the water tank 6 Control lamp
2 Folding handle/water tank 7 Voltage changeover switch
3 Spray button 8 Spray nozzle
4 Release head 9 Steam jet button
5 Temperature regulator 10 Steam jet switch

Accessories: filling beaker

• Clean the iron with a slightly moist cloth.
• Press the unlock button (4) and pull the handle up until it locks in place
• Fill the water tank (2) through the filler aperture (1) with pure water (up to degree of hardness 2). If the water is harder than this, please use distilled water. Fill the iron with the help of the filling beaker.
• Before initial use of the iron press the steam jet button (9) to allow the contents of the water tank to evaporate on level •••. To do so, please place the device horizontally on a suitable surface (e.g. sink).

Use of the Iron

ATTENTION: iron only garments with this appliance.

Ironing without steam (steam jet switch (10) set to 0)

1. Place the iron on its stand.
2. Electrical connection:
   Make sure that the iron voltage (see name plate) and the mains voltage match. The voltage can be switched between 220-240 V/100-127 V using the voltage switch (7) on the bottom of the iron.

3. Sort out the garments according to their ironing temperatures. Start with the lower temperatures. It is set with the temperature regulator (5):
   • Synthetics, silk (low temperature)
   • • Wool (medium temperature)
   • • • Cotton, linen (high temperature)

4. Insert the mains plug into a correctly installed safety socket.

5. The control lamp (6) lights up. As soon as it shuts off, the set temperature is reached (approximately 3 min.). Now you can start to iron.

6. Always pull the plug out of the socket after using the iron.

Steam Ironing ( )

Please ensure that the steam jet switch and the temperature regulator are turned to the steam position ( ) This requires a high temperature (cotton, linen).

Extra steam is produced by pressing the steam jet button (9).

GB

Spray function ( )

• Turn the steam jet switch to the "0" position.
• In order to moisten an area to be ironed, press the spray button (3).

Packing the iron before travelling

• Let the iron cool down completely.
• Empty the water tank.
• Press the release head and fold the handle downwards.
• Wind up the cable slightly. Please do not wind it around the device.

Cleaning and Storage

• Always remove the mains lead before cleaning!
- Clean the casing with a slightly damp cloth.
- Clean the iron with a slightly moist cloth. Please do not use any abrasive cleaning agents!
- To clean the iron and remove deposits of starch and humid substances, rub it with a piece of cloth soaked in a mixture of vinegar and water.

This device has been tested according to all relevant current CE guidelines, such as electromagnetic compatibility and low voltage directives, and has been constructed in accordance with the latest safety regulations.

Subject to technical changes without prior notice!

Guarantee

The device supplied by our Company is covered by a 24 month guarantee starting on the date of purchase (receipt).

During the life of the guarantee any fault of the device or its accessories *) ascribable to material or manufacturing defects will be eliminated free of charge by repairing or, at our discretion, by replacing it. The guarantee services do not entail an extension of the life of the guarantee nor do they give rise to any right to a new guarantee!

Proof of the guarantee is provided by the proof of purchase. Without proof of purchase no free replacement or repair will be carried out.

If you wish to make a claim under the guarantee please return the entire machine in the original packaging to your dealer together with the receipt.

*) Damage to accessories does not mean automatic free replacement of the whole machine. In such cases please contact our hotline. Broken glass or breakage of plastic parts are always subject to a charge.

Defects to consumables or parts subject to wearing (e.g. motor pistons, kneading blades, drive shafts, spare remote control, spare toothbrushes, saw blades, etc.) as well as cleaning, maintenance or the replacement of said parts are not covered by the guarantee and hence are to be paid!

The guarantee lapses in case of unauthorized tampering.

After the expiry of the guarantee

After the expiry of the guarantee repairs can be carried by the competent dealer or repair service against the payment of the ensuing costs.

PL