USER MANUAL CL-EXM15X COSYLIFE
Machine à expresso Espresso Coffee Maker Espressomachine Cafeteria Espresso
973757 - CL-EXM15X
CONSIGNES D'UTILISATION 02
INSTRUCTIONS FOR USE 26
Thank you for choosing this COSYLIFE product. COSYLIFE products are chosen, tested, and recommended by ELECTRO DEPOT, so you can be sure you are getting a top-quality, easy-to-use product that won't let you down.
We're confident your new device will be a pleasure to use every day!
Welcome to ELECTRO DEPOT.
Table of Contents
Parts Product usage Caracteristiques
Before first use
Making espresso
Making hot water
Heating/frothing milk
Changing the dispensing amount
Cleaning and maintenance Troubleshooting Storage
Before using the unit, carefully read both the Manual and RegulatoryWarnings booklet. Keep these instructions for future reference and pass them onto any new owners of the unit.
Parts
Control panel
Power button
1 cup of coffee button
2 cups of coffee button
Steam button
Control knob
1 cup metal filter
2 cups metal filter
Filter holder
Drip plate
Drip tray
Water tank cover
Handle
Water tank
Steam handle
Steamer
Measuring spoon
Product usage
- This appliance is designed for brewing coffee and boiling water and must not be used for any other purpose. It is intended for household use only and should not be used for commercial purposes. Any other use may damage the product or cause injury.
Specifications
| Model: | 973757 – CL-EXM15X |
| Supply voltage: | 220-240V~, 50-60Hz |
| Power consumption: | 1250-1450W |
| Capacity: | 1L max./0.2L min.
Max. 8 large cups/min. 6 small cups |
| Protection class: | Class I |
Before first use
- Place the unit on a stable, level, non-slip, heat-resistant surface.
- Do not position the unit near the edge of a countertop where it could accidentally fall off.
- Do not place the unit on a hot surface such as a stove.
Unwind the power cord fully.
- Clean the unit to remove any residues from the manufacturing process. The appliance may give off a slight odour when you start using it. This is normal due to its newness and does not indicate a manufacturing defect or danger.
Make sure the filter holder is tightly fixed in the CLOSE position. Place a coffee cup (not provided) on the drip plate, making sure it is placed under the spout on the filter holder.
B Product usage
15 The control panel lights will stop flashing when the machine has preheated.
17 ！ Place a coffee cup (not provided) on the drip plate, making sure it is placed under the spout on the filter holder.
On initial use or when there is air in the unit, a noise may be heard for about 20 seconds as the water pumps through the coffee machine.
B Product usage
WARNING: If there is not enough water in the coffee maker's water tank, it will stop dispensing water and the control panel indicator lights will flash. Once the tank has been refilled, wait a few minutes for the machine to initialise.
Making espresso
- For best results, always preheat the machine as shown in steps 2 - 16.
B Product usage
Do not leave the coffee maker unattended whilst brewing coffee, as you may need to reposition the cup to catch the coffee being dispensed or prevent the coffee from spilling out of the cup. A beep will sound to inform you that your coffee is ready when it has finished dispensing from the filter holder spout.
B Product usage
Making hot water
B Product usage
Heating/frothing milk
Use this function to heat and froth milk for a latte or cappuccino. Do not overfill the milk jug as the milk volume increases when you add steam to heat and froth it.
Choose a cup that is large enough to contain the total volume of the coffee and milk required for your latte or cappuccino.
CAUTION: Hot steam can cause burns! Keep your hands and face away from the end of the steamer where the nozzle releases steam.
- Follow steps 2 - 5 and then 11 - 16 to preheat the machine.
B Product usage
B Product usage
! After using the steamer, you can start making another cup of coffee straight away. However, if the control panel lights flash quickly, the water temperature is too high. Place an empty jug under the steam nozzle. Turn the control knob to the hot water setting and the hot water will run out until the temperature has sufficiently reduced. When the pump stops, turn the control knob to the OFF position and now you can resume making coffee. Alternatively, if you do not want another coffee, press either of the coffee cup buttons to cancel heating.
NOTE: If the control panel lights continue to flash, turn off the unit, wait a few minutes and then turn it back on again.
Changing the dispensing amount
Dispensing a single cup
Dispensing 2 cups
Restore the factory settings
B Product usage
Standby mode
- If no operation is undertaken for a period of time (ranging from 30 seconds to 3 minutes depending on the last operation undertaken), the coffee maker will automatically turn off.
- To reactivate the coffee machine, press the 1/2 cups or steam button on the control panel.
Cleaning and maintenance
WARNING!
- To prevent the risk of electrocution, unplug the unit from the wall socket before cleaning.
- Allow the unit to cool down completely before cleaning.
- Do not immerse the appliance, power cable or plug in water or any other liquids as they contain electrical components.
- Never use solvents, chemical or abrasive cleaning agents, wire brushes, sharp objects or scouring pads to clean the appliance.
- Dry all parts thoroughly and reassemble before using the unit.
Descaling the coffee maker
WARNING!
- Regular descending will improve the coffee maker's lifespan.
- The frequency required for descending will vary depending on the hardness of the water and the amount you use the coffee maker.
- Only use descalers that are made for this specific purpose and follow the manufacturer's instructions carefully.
- Using filtered water will reduce the amount of scale in the coffee maker.
After 500 coffee cycles, all indicator lights will flash 5 times to alert you that coffee maker requires descaling. This alert will keep appearing each time you turn on the coffee maker until it is descaled.
NOTE: Avoid pouring the water/descaler solution into an enamelled water basin. Do not reuse the same solution. In case of unsatisfactory results, repeat the steps above.
- Alternatively, you can follow the steps above and clean the coffee maker with a vinegar solution comprising 3 cups of white vinegar and then water up to the MAX mark (1L).
Troubleshooting
| Problem | Possible cause | Solution |
| Water leaks from the bottom of the coffee maker. | ·There is too much water in the drip tray. | ·Empty and clean the drip tray. If this does not resolve the issue, contact your nearest service centre. |
| Water leaks out of the side of the metal filter or filter holder. | ·Coffee grounds on the filter rim are preventing a tight seal around the filter. | ·Remove excess coffee grounds. |
| The coffee tastes vinegar. | ·Incorrect cleaning. | ·Clean the coffee maker as shown in the Before First Use section. |
| ·The coffee is stored in a hot or wet environment or for too long and has gone off. | ·Store coffee power in airtight jars in a cool, dry place such as a fridge. |
| The coffee maker is not turning on. | ·The power is incorrectly connected. | ·Plug the power plug into a wall socket, making sure that the plug is firmly secured into place. |
| The steamer is not frothing the milk. | ·The steamer has not preheated. | ·Press the steam button to activate the steamer and wait until it stops flashing and lights up steadily on the control panel. |
| ·The container is too large and not the correct shape. | ·Use a tall, narrow jug. |
| ·The wrong type of milk is used. | ·Use whole or semi-skimmed milk. |
Storage
WARNING!
Before storing the appliance, unplug it from the wall socket and allow it to cool completely.
- If you do not plan to use the appliance for a long time, we recommend that you clean it and then store it in its original packaging in a cool, dry place, away from direct sunlight, excessive dirt and dust, and out of the reach of children or pets.
Bedankt!
This product is guaranteed against faults caused by defects in manufacturing or the materials used for a period of two years, starting from the date of purchase.* This warranty does not cover defects or damage caused by failure to install the device correctly, incorrect use of the product, or excessive wear and tear.
*proof of purchase required.
NL
GARANTIEVOORWAARDEN
