TVSAND434K - 4K UHD TV POLAROID - Free user manual and instructions

USER MANUAL TVSAND434K POLAROID

<Polaroid @ 6686000 © © 66

Antenne Channel Installation Mode Channel Anterna [e]

Make the most of your TV

Finish setting up your TV

TVSAND434KPRO1 USER MANUAL

The warning sign CAUTION: TO AVOID THE RISK OF The warning sign showing a lightning bolt ELECTROCUTION, DO NOT showing an in a triangle indicates REMOVE THE COVER (OR THE exclamation point in that this product BACK OF THE DEVICE). a triangle indicates contains “dangerous NO PARTS ARE REPLACEABLE BY that this point of the electrical voltages". THE USER. PLEASE CONTACT manual requires QUALIFIED PERSONNEL IN CASE special attention. OF FAILURE. CAUTION: - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR SERIOUS INJURY: Read these safety instructions before using your device and store them for possible future reference. © This device must only be connected to a mains network whose characteristics are identical to those shown on the device identification plate. © The mains plug must always be easily accessible. lt serves as a mains disconnecting switch of the device. © To disconnect the device from the mains, the plug must be disconnected. Hold the mains cable by its plug. Do not pull on the mains cable to disconnect the plug. © The mains cables must be routed so that they are not trampled upon or pinched by objects placed on or against them. @ lfthe mains cable of the device is damaged, it must be replaced by the manufacturer, its after-sales service or a similarly qualified person to avoid any danger. The device must not be exposed to dripping or splashing water, moisture or liquids. Do not place the device near water, for example in a bathroom or near a sink. No objects filled with liquids such as vases should be placed on or above the device. Never touch the mains cable with wet hands, this could cause a short circuit or electric shock. © To avoid the risk of fire, do not place sources of open flames, such as lighted candles, or heat sources such as radiators, on or near the device.

The device is intended for use only in a temperate climate. If smoke, an unusual odour or strange noise is emitted by the device: unplug the mains cable from the electrical outlet and consult the after-sales service or repair centre. Never attempt to make repairs yourself, this could be potentially dangerous. Do not attempt to open or disassemble the device. This would expose you to dangerous voltages. The slots and openings of the device are intended for ventilation and to ensure its operation. To prevent overheating, these openings must not be obstructed or covered in any way, such as by newspapers, tablecloths or curtains. Always leave a minimum distance of 10 cm around the device for sufficient ventilation. Never push any object into the device through one of its openings, as it may come into contact with electrical components, which can cause an electric shock or fire. In case of thunderstorm or lightning, immediately unplug the mains cable from the wall outlet. Always turn off the device when not in use. Unplug the mains cable from the electrical outlet when the device will not be used for a long period of time. Unplug the device from the electrical outlet before cleaning. Do not use liquid or aerosol cleaners. Use a dry, soft cloth for cleaning.

connected to a mains socket with a protective earth connection. If the product does not bear the logo, it is a Class | device. lt must then be CAUTION -: TO AVOID RISK OF INJURY OR DAMAGE TO THE PRODUCT OR OTHER EQUIPMENT: This product is intended for household and personal use only. Do not use this product for commercial, industrial or other purposes. Do not subject the product to strong shocks, extreme temperatures or direct sunlight for prolonged periods. Keep the product away from magnetic objects, motors and transformers. Do not use the product outdoors, regardless of weather conditions. Install the device only on a stand (furniture, wall.) that can support its weight safely.

+ WARNING: never place a TV on an unstable location. This can fall, causing injuries or even the death of a person. Many injuries, especially in the case of children, can be avoided by taking simple precautions such as: - The use of furniture or stands recommended by the TV manufacturer. - The exclusive use of furniture that can support the weight of the TV safely. - Make sure that the device does not protrude from the edge of the furniture on which it is placed. - Never place the device on a tall piece of furniture (e.g. cabinets or bookcases) without attaching both the furniture and the device to a suitable stand. - Do not place the device on a trolley or on a stand that is not stable. Do not install the device on any fabric or other materials placed between its base and the supporting furniture. The device could fall and be damaged or seriously injure a person. - Do not use or watch the TV while driving. This is dangerous, and illegal in some countries. - Explain to children the dangers they face when climbing on the furniture to reach the device or its controls. - If you keep this device and change the location, you should apply the same considerations. -_ CAUTION: to avoid accidents, this device must be securely attached to the floor or wall according to the installation instructions. À CAUTION: TO AVOID EYE HAZARDS: + _Itis best to have soft indirect lighting to watch TV. Avoid completely dark environments and any reflection on the screen, as these can cause eyestrain. À USE AND HANDLING OF BATTERIES: + CAUTION: danger of explosion if the batteries are not inserted correctly or if they are replaced by a non-similar or incompatible model. + _Replace the batteries only with batteries of the same type or equivalent type. e Batteries must not be exposed to excessive heat such as that from the sun, fire or similar origin.

Never throw batteries into fire and never expose them to heat sources. Do not mix different types of batteries, or new and used batteries. © The batteries must be inserted according to the polarities indicated on the battery and in the battery case of the remote control. © Used batteries must be removed from the remote control. © The batteries must be disposed of safely at the assigned specific collection points to preserve the environment. Follow the disposal instructions indicated on the batteries and at the collection points. © Keep batteries out of the reach of children and animals. Only adults are capable of handling the batteries. For installation, handling, cleaning and disposal of the device, refer to the following chapters of the user manual. User Manual Remote Control Stand: All the pictures in this manual are just for your reference, appearance and display should subject to the final product.

FEATUR 43" LED Display This unit has a built-in LED display window to provide clear vision and low radiation. Support Auto TV Scanning Support Digital Broadcasting Reception Support TV Guide Function Support TELETEXT (Europe) Function Support USB Multimedia Playback Support Multi-languages On Screen Display Support Full Function Remote Control Support HDMI, ANT,RJ 45,USB, AV and CI Input Support EARPHONE and OPTICAL With Detachable Stand Holder With External Antenna Jack With Built-in Speakers

ENERAL PART MAIN UNIT Front View bottom View 1: Remote control sensor. 2: Indicator LED: RED © STANDBY. “=? VOL- and move left “+? VOL+ and move right “A7? CH- and move down #w? CH+ and move up -Short press to confirm or enterthe menu -Long press to Power off

REMOTE CONTROL 1: POWER: To set the TV to Standby or Power On modes. 2:) : Select among the different input signal sources. 3: NUMERIC KEY: For direct access to channels. 4: CD: Jumps to last channel viewed 5:e (dot): Input the character “dot”. 6 :NETFLIX: Press to open NETFLIX. 7 :(@runbe) : Press to open the YouTube. 8 :P.MODE: Press to switch the picture mode. 9 :S.MODE: Press to switch the sound mode. 10:© : Press to open the Home Page. 11:MENU: Press to open or close the on-screen menu. 12 :OK: Confirms selection. Press to open the app list 14 :Back: Return to the previous menu. 15:VOL+/-: To adjust sound level. 16:CH+/CH-: To access the next or previous channels. 17:63 :Press to display the channel information REMOTE CONTROL <Polaroid

REMOTE CONTROL 18: GUIDE: Press to display electronic programme guide in TV mode 19:MUTE:To disable or enable the speaker sound output. 20:-#«(Reverse) : Reverse playback rapidly. 21: mI(Play/Pause) : Start playback or Pause playback. 22: (Forward): Advance playback rapidly. 23: KA (Prev) : To skip to the begining of the previous chapter/track/photo. 24:BæI(Next): Skip to the beginning of the next chapter/track/photo 25: (Stop): Press to stop multimedia playback 26: TEXT: Press to select the teletext mode. 27: ASPECT : Press to change the picture aspect ratio 28:SUBTITLE: To turn on subtitles in DTV mode! 29:MTS : Press to select Mono, Nicam,Stereo for ATVchannel,Audio language for DTV channel. 30:Coloured buttons: Implement the relevent Polaroid operations ccording to the prompt atthe botton ofthe menu in the text. 31: Google Assistant : Press to openthe google assistant or tart a voice search NOTE: This Remote Control is used across a range of TV models with differing capabilities.Some functions listed above may not be applicable to your TV model

BATTERY INSTALLATION Install the batteries as the following pictures. Be sure + and -terminals are positioned as indicated in the battery compartment (Fig1).

SERVICE LIFE OF BATTERIES

- The batteries normally last for one year although this depends on how often the remote control is used. - Ifthe remote control fails to work even when it is operated near the player, replace the batteries. - Use two size AAA dry batteries. NOTE: © Do not drop, step on or otherwise impact the remote control. This may damage the parts or lead to malfunction. @ lfthe remote control is not going to be used for a long time, remove the batteries. REMOTE CONTROL Fig1 Fig2 OPERATION Remote Control Sensor Point the remote control from no more than about 6m from the remote control sensor and within about 60° of the

: bal e front of the player (Fig2). © room. - Do not point bright light at remote control sensor. - Do not place objects between the remote control and the remote control sensor. - Do not use this remote control while simultaneously operating the remote control of any other equipments. NOTES: - The operating distance may vary according to the brightness of the 30° 30° TT ® EU:

BASIC CONNECTION @ Ensure all the cables are disconnected from the main unit before connecting to AC power source. © Read through the instructions before connecting other equipments.

Install external antenna into antenna jack for best picture. Antenna Outdoor antenna Indoor amplifier antenna I amplifier Power plug 75 OHM of antenna antenna amplifier ce, plug

HEADPHONE HEADI Connection of intelligent external equipment for data transmission, at present, the market has been specially designed for portable TV K song make the microphone can connect the headphone jack Like a violent wind song's wireless microphones, just connect it to À TV headphone jack, and acoustics, can enjoy karaoke. OPTICAL = æ O Hours In the back of audio-visual equipment, there are Optical identification.Light audio interface of image not only, and the audio has absolute optimization function.But using is not very convenient, : à lot of equipment cannot be used directly, need to transform.

RJ 45 and HDMI reticle Use RJ 45 that You can browse video on the Internet. Some TV sets can also download video on the Internet for watching at any time “ Digital Video | 2j DVD playe computer | Réorderpve | Blu-ray disc player The HDMI cable connects the computer: to the TV, making the TV a monitor for the computer, capable of synchronizing images and sounds from the computer USB and ANT Connection cable or wireless antenna, watch TV

0 = Ho USB terface is used to and other USB devices (such as mobile hard disk, U disk, etc.), direct broadcast audio and video files in USB devices.Turn it also has a memory function, such as on a USB interface with the 1 camera, another interface to connect mobile hard disk, you can easily move the photos from digital camera to hard disk.

1. Press CH+ button to play next channel.

2. Press CH- button to play previous channel.

3. Press number buttons on remote control directly to select desired program.

NOTE: Press -/-- button repeatedly to switch the digit. VOLUME CONTROL - Press VOL+ or VOL- to adjust the level of current volume. Available range: 0-100. MUTE CONTROL - Press MUTE button to mute the sound, press it again to turn on the sound. SOURCE SETTING - Press SOURCE button on the remote control to display the sources list. - Press UP or DOWN navigation button to select desired input source, and then press OK button to confirm selection. Available options: TV, Composite, AV, HDMI

- Press ASPECT button on remote control repeatedly to select VIDEO SIZE directly. Available options: Auto, 4:3, Wide screen,Full Super zoom NOTE: If there's no signal, pressing ASPECT button will not work. And the available video size may be different for different input source.

BASIC OPERATION INITIAL SETUP The first you turn your TV,the setup wizard will guide you through setting up basic settings: Please according to the text tip to first time setup. This function is used for the remote control pair code: After the code is successful.you can use the Bluetooth remote control to operate the TV. If you don't need to use the Bluetooth remote control, you can press the BACK button to skip this step. Welcome Press Y À to select the system language and press OK to confirm the language: Quickiy set up your TV with your Android phone? Connect your Androïd phone to your TV, select Continue" to continue the connection, and choose "Skip' to skip this step. Press Y A to select the the Wifi to connect, press OK and enter the password to confirm the connection is successful. You can also try use Ethernet and skip select network, Terms of Service By accepting the Google Terms of Service lo improve the product experience, select "Accepf to accept this condition. Location Agree to Google to get the location information of your device to get more features,choose "YES" to accept. Help improve Android By agreeing to automatically send diagnostic information to Google to improve discriminative power, choose "YES" to accept. 1.Your device is powered by Android TV and press the button to select the browsing feature.

2. You can get more apps from Google Play and press

the button to go to he next screen.

3. Transfer photos and other content to the TV via the

built-in chromecast, press OK to complete the browsing Press Y A to select the country of your device and press OK to confirm. Used to set your device’ s password to ensure security and privacy, Press OK to pop up the soft keyboard, and use the remote control to enter the 4-digit password automacically jump to the next interface.

BASIC OPERATION Press Y Ato select whether to search, select "Scan to search, select "Skip Scan” to skip the search. Confim Paseo Confirm the password again and keep it consistent. pis comp Use the remote control to enter the password and complete the password confirmation. For selecting the mode, press Y Akey to select Home mode and press OK to confirm. Confirm the selected mode again, select "Yes to confim the selected mode, and select "No" to Press the OK button to agree to (Disclaimer) retum to the previous step. After setting is complete, You can watch TV. Let this device be detected as a Google Cast device and allow Google Assistant and other services to wake this device up to respond to Cast commands, ‘even when on standby and the screen is off. Press OK to complete the setup. To select the Tuner mode for searching, press YAto select and press OK to confirm:

BASIC OPERATIONS HOME SCREEN Press the HOME button to go to the home page © open the google assistant start a voice search or use keyboard search @ Among the applications installed on the TV, the icons for the favourite applications are shown inside here (Favourite applications can be added/deleted/ changed its order by users.) Apps: Click to jump to Apps screen where all the installed applications are listed. Notification: Display the notifications. Inputs: Icon to select an input source ENetwork&intemet: Icon to Setup Network, Such as wifi ESettings: Various settings can be configured here. For details on the settings, see the next explanation INPUT SOURCE 1.in the HOME interface press Y À 4} to select the “Inputs” icon,press OK to open the input source list, then press up to highlight an input and press OK to switch 2.Under Live TV, press the SOURCE button to display the list of input sources. You can select the disired_ source: Inputs ©Tv O Composite © HDMI © HDMI2 O HDMI3 © HDMI4

NAVIGATING THE ON-SCREEN MENU

1. There are two ways to enter. First, in Live TV, press

the menu button to display TV options, press Y À <> select the settings menu and press OK to confirm. Second, in the HOME interface, press the > key to select the icon of the circular settings menu, press OK to confirm.

2. Press Y Abutton to select what you want set

3. Press OK to enter setting.

Press BACK to return to the previous menu. If the main menu is displayed, pressing BACK will close the onscreen menu: Network& Internet

1. Press Y Abutton to select what you want set.

2. Press OK button to adjust

3. After finishing your adjustment, press OK button

to save and return to the previous menu. Netnork & Internet

gutgmatie searen platform jneriace of jAgtenna- Channels Display ie scan sub-menu based on Update Scan ‘fe auomatcal} scarch Lor different Channel installation modes. Channel installation mode:Select on-screen display channel sources. You can select the signal type. *Antenna:Set the signal type to antenna. When set to Antenna, the TV can receive analog and digital (DVB-T/DVB-T2)broadcasting signals: «Cable :Setthe signal type to cable. When setto Cable, the TV can receive analog and AM broadcasting signals. Analog Manual Scan : Manual ATV search station. After input the frequency point, you can select Auto Channel Update up or down Search station. Parental controls : Press Y Abutton to select the option then press OK button to enter the sub-menu. Audio Channel: Press Y Abutton lo select the option then press OK button to enter the sub-menu. pen source licenses: Press Y Abutton lo select the option then press OK button to enter the sub-menu. Antenna Channel Installation Mode Single, RF Scan :DTV manual search lof and Channel right after selecting RF Channel, directiy OK search Cable

1. Menu->Settings->Channel->Channel

Installation Mode, select Cable.

3. Enter Channel Scan,where Numericable APPS

are the local operators,and the default Scan Mode is Advance:Others have Advance, Quick and Full Scan modes. In this menu, you can set the APP permissions and read the app lists. 1.Press Y A button to select what you want set. 2:Press OK button to adjust. 3.After finishing your adjustment,Press BACK button to return to the previous menu DEVICE PREFERENCES ABOUT Single RF Scan: manual search station

In this menu. you can read the information and settings of TV. 1.Press Y A button to select what you want set. 2.Press OK button to adjust 3.After finishing your adjustment, Press BACK button to return to the previous menu. Press UP/DOWN button to select Sign in or Skip.

1. Press Y Abutton to select what you want set.

2.Press OK button to adjust.

3. After finishing your adjustment, Press BACK

button retum to the previous menu: RETAIL MODE Retail Mode Retail Mode Retail mode: Press v A button to select the option then press OK button to choose ON/OFF.

BASIC OPERATIONS Start now: Press v Abutton to select the option then press OK button to enter screen saver. LOCATION Location Location status In this menu, you can set searchable apps, safe search fier, block offensive words, open source licenses. Location status : Press Y A button to select the option

1. Press Y Abutton to select what you want set then press OK button to enter he sub-menu.

2.Press ok button to adjust. (Optonal:Use Wi-Fi to estimate location, Of.

3. After finishing your adjustment, Press BACK

button retum to ihe previous menu. Usage & Diagnostics Chromecast built-in on Open source can Version number In this menu, you can read the infomation and setings of Chromecast.

1. Press v A button to select what you want set.

2.Press ok button to adjust.

3. After finishing your adjustment, Press BACK

button retum to ihe previous menu. SCREEN _SAVER Screen saver Usage & diagnostics -Press v Abutton to select the option then press OK button to choose ON/OFF. ACCESSIBILITY Puce Audio Description : Press v Abutton to select the opfon then press OK button to choose ON/OFF. stron Visually Impaired : Press Abution to select the option then ; OK button to enter the sub menu. Screensaver : Press Abution to select the option press don | then press OK button to enter the sub-menu.(Optonai: _ SPOken Subtitle : Press v Abution to select the Tum screen off, Backdrop, Colors). option then press OK button to choose ON/OFF. When to Start: Press button to select the option Gprons: Press v Abuton to sect the option then then press OK button to enter the sub-menu.(Optional: … P'ESS tion to enter the sub-menu. 5 minutes, 15 minutes, 30 minutes, 1 hour, 2 hours). High contrast text Press v A button to select the Put device to sleep: Press v Abutton to select the °Phon Ihen press OK bufton Lo choose ON/OFF. opion then press OK button to enterthe sub-menu. RESET (Opional: 30 minutes, 1 hour, 3 hours, 6 hours, 12 Press OK button to enter the sub-menu. hours, Never). 24 PS ES sing

BASIC OPERATIONS RESET In this menu, you can pair Bluetooth devices. Press OK button to enter the sub-menu 1.Press the* MENU ”and” LEFT "buttons at Reset-Erase everything. the bottom of the remote control for 5 seconds.

2. Wen the LED starts to flash, release it. The

remote controller wil send the pairing signal to the TV and display the infomation of the remote control on the right side of the screen. 3.Press the OK button to display the pairing. the paired is displayed,the connection is successful 4.fthe couldnt pair appears, the connection fails. Wait 30 seconds and then press the“ MENU ” and"LEFT ” buttons at the bottom of the remote REMOTE & ACCESSORIES control for 5 seconds to repeat the previous steps 5.Press BACK button retum to the previous menu. MULTIMEDIA PLAYER Seorching In the HOME interface, select the MMP APP to display Video, Photo, Audio, Text.After inserting th USB flash drive, you can view the corresponding files in the USB flash drive. NOTE: The menu may be different depending on when you purchased the TV.

MAINTENANCE © Be sure to press POWER button to set the player to the standby mode and disconnect the power plug before maintaining the player. © \Wipe the player with a dry, soft cloth. © lfthe surface is extremely dirty, wipe clean with a cloth which has been dipped in a weak soap-water solution and wrung out thoroughly, and then wipe again with a dry cloth. © Never use alcohol, benzene, thinner, cleaning fluid or other chemicals. And do not use compressed air to remove dust. © Do never insert any object nor liquid into ventilation areas. It may damage the product, create short-circuit or electric shock danger. WALL MOUNTING © Contact a professional for assistance when wall mounting your TV. We are not responsible for any damage to the product or injury to yourself, if you mount the TV on your own. © Do not wall mount the TV while TV is turned on. It may cause personal injury due to electric shock. © Use standard M6*14mm screws (4 pieces) to mount this TV. Back of your TV =— 200 —— kT=æ | e E [ LL UUULTINLT ®

STAND INSTALLATION Your TV is packaged with the Stand and the Cabinet separated. Before enjoying this TV, please carry out the Stand Installation according to the instructions below. Step 1 Place the TV faced down on a soft cloth or cushion to prevent the panel from being damaged. Step 2 Align the Stand with TV bottom and then force the end of stand until the TV is fully seated on the stand. Step 3 Tighten the included screws with a screw driver. NOTES:

1) Unplug the power plug first when installing

or removing the TV Stand.

2) To avoid any damage to this TV, contact

one or more partner for assistance when do) installing or removing the TV stand.

Specifications are subject to change without notice. ACCESSORIES : Stand 2 pieces Remote control - 1 User manual 1 Allthe pictures in this manual are just for your reference, appearance an should subject to the final product

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Spec sheet about energy Brand Polaroid Reference TVSAND434KPRO1 Energy efficiency grade A Screen size 107.9 cm ; 42.5 inches Eletrical consumption in on mode (W) 60W Annual electric consumption for 4 hours/day, 365 days/year 87kWh/year Eletrical consumption in sleep mode (W) <0.5W Eletrical consumption in off mode (W) N/A Screen resolution (pixels) 3840x2160 Specifications are subject to change without notice.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI.

GENERAL TROUBLESHOOTING Check the following points before assuming malfunctions of this unit: Symptom[COMMON] Remedy No power. Insert the power plug securely into the power outlet. No picture. Ensure that the equipment is connected properly. © Ensure that the equipment is connected properly. © No sound. @ Ensure that the input setting for the TV and stereo system are @ Distorted sound. correct. © Adjust the master volume to a suitable volume by pressing VOL+/VOL- button. No operations can be performed with the remote control unit. © Check the batteries are installed with the correct polarities. © The batteries are exhausted: replace them with new ones. © Point remote control at the remote control sensor and operate it again. © Operate the remote control unit at a distance of no more than 6m from the remote control sensor. @ Remove the obstacles between the remote control and remote control sensor. No key operation (by the main unit and/or the remote control unit) is effective. Disconnect the power plug and then reconnect it. (The player may not be operating properly due to lightning, static electricity or some other factors.) Symptom[TV] Remedy © Adjust antenna or use an external antenna. @ Relocate the unit near a window (if inside a building). No or poor picture. © Move units away from this product that causes interference. Do Auto Tuning again. Try another channel. No sound or poor sound. © Check the audio settings. © Press MUTE button on remote control to cancel mute function. © _Unplug the headphone. Noise or other interface. Electronic equipment near the unit is causing interface. Relocate the unit or move the equipment.

Warranty conditions OPERATING MANAGEMENT: Your product is guaranteed 2 years. To request support, contact the customer service at 08 11 48 22 02 You will then be asked the defective part and the original invoice stating the product regulation. We may ask you for photos of your appliance. FAILURE TO PACKING: Ifit appeared, after unpacking the product or device, a vice preventing the use of the product in its expected configuration, contact the customer service within 72 hours worked.

DISCLAIMER OF WARRANTY

DISCLAIMER OF WARRANTY RELATED TO THE ORIGIN OF DAMAGES The guarantee does not apply in case of accidental physical damage, it does not cover such damage and failures that resulted: @ improper installation (of a bad installation) or a misuse or poor maintenance of the product. @ improper use of the material or not complying with the instructions in the user manual. @iighining, flood, fire, power surge, shock, poor ventilation, a fall, discoloration due to the action of light, burning, humidity, excessive heating without humidifier, or irregular ground or insects. @repairs made and / or working on the hardware and / or opening of it by an unauthorized person by the manufacturer. @ maintenance, repair or replacement of parts due to normal usury or failure to maintain. @ modification of the construction and original features of the guaranteed product. @ corrosion, oxidation, a bad connection nor an external power supply problem. EXCLUSION OF WARRANTIES RELATING TO THE NATURE OF DAMAGES (INDIRECTS DAMAGES) The guarantee covers only the right to repair or replace the guaranteed product. Consequently, the indirect damage resulting from the failure or damage not covered by

warranty, including: © Commissioning costs, adjusting, cleaning; © Damage of any kind resulting from the unavailability of the product guaranteed during the period between deterioration and failure and repair or the replacement of the product guaranteed. OTHER EXCLUSIONS © Damage and faults under specific exclusions in the warranty manufacture guaranteed product, as mentioned in the product instructions for use; © The æesthetic damage; © The products guarantee that the customer is not able to return or those who returned without their accessories. PIXEL POLICY @ in accordance with the ISO 13406-2 norm, a product is considered defective when the number of dead or lit pixels is over 3.

SUPPORT Please refer you to the board below to find easily your after sales number: COUNTRY PHONE NUMBER

PLR IP Holdings, LLC, its licensees and affiliates, fully support all electronic waste initiatives. As responsible stewards of the environment, and to avoid violating established laws, you should properly dispose of this product in compliance with all applicable regulations, directives or other governances in the area where you reside. Please check with local authorities or the retailer where you purchased this product to determine a location where you can appropriately dispose of the product. THE DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT WASTE PRODUCTS ON THE PART OF FINAL USERS IN THE EUROPEAN UNION This symbol on the product or on the container indicates that this product cannot be eliminated with the general waste. The user is responsible for eliminating this kind of waste by throwing them away ata “recycling point” specifically for electrical and electronic waste. Selective collection and electrical equipment recycling contribute to preserve natural resources and warrant waste recycling to protect environment and health. In order to receive further information about electrical and electronic waste collecting and recycling, contact your Local Council, the service of household waste or the establishment where the product was acquired. CEX / ) To avoid possible hearing damage, do not listen at high audio volume for long periods of time. Product features, specifications and appearances are subject to change without notice. Declaration of conformity EU: Market Maker Brand Licensing, hereby declares that this equipment, conforms to the essential requirements and other relevant provisions of Directive 2014/53/0UE. The declaration of Conformity can be viewed at the following address: http:/!www.mms-support.net/OTA/ECD_MMBL_TVSAND434KPR01.pdf

$&Polaroid Inst recognizable. Instant resssuñng. The Palaroi Ciasie Border lets Youknow you've purchased a product Kat exemple ie be quais of our brand and Hat contribute 10 our heritage of quai and imovaion. © 2019. Al Rights Reserved Questions? Need some help? “This manual ll = ET Polaroid, Polaroid & Pixel, Polaroïd Classic Border Logo and Polaroid Color Spectrum are trademarks of PLR IP Holdings, LLC, used under license. PLR IP Holdings, LLC does not manufacture this product or provide any Manufacturers Warranty or support www.polaroid.tech Market Maker Brand Licensing -79/81 Ancienne Route Nationale 7-69570 Dardilly, France If you stil have questions, call our help line: CRÉROCT 08 11 48 22 02 www.polaroid.tech

MULTIMEDIAPLAYER Finish setting up your TV

USB en ANT Connection cable or wireless antenna, watch TV USB USB interface is used to and other USB devices (such as ? mobile hard disk, U disk, etc.), direct broadcast audio and _ video files in USB devices.Turn it also has a memory function,

© Composite © HDMI © HDMI2 O HDMI

REFERENTIE TVSAND434KPRO1.133