KM5560 - Appareil de cuisine AEG - Free user manual and instructions

USER MANUAL KM5560 AEG

PT MANUAL DE INSTRUÇÕES Q*

FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

Visit our website to: Get usage advice, brochures, trouble shooter, service information: www.aeg.com/webselfservice Register your product for better service: www.registeraeg.com Buy accessories and consumables for www.aeg.com/shop

CUSTOMER CARE AND SERVICE When contacting Service, ensure that you have the following data available:

- Model Number - PNC number - Serial number The information can be found on the rating plate.

ENGLISH Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and spare parts. They have been designed especially for your product. This product is designed with the environment in mind. All plastic parts are marked for recycling purposes.

B. C. D. E. F. G. H. I. J.

Motor head (tiltable)

Speed selector Housing Tilt head locking lever Working light Attachment hub Attachment shaft Stainless steel bowl Bowl clamping plate Non-slip feet

Wire whip Coated flat beater SoftEdgeBeater™* Coated dough hook Meat grinder* Slicer/Shredder* PerfectRiseLid™ Pulse function*

* Certain models only

Before using the appliance for the first time: Unplug the appliance. The Wire whip, Meat grinder* and Slicer/Shredder* should only be washed by hand in warm soapy water. The bowl, Flat beater, Dough hook, SoftEdgeBeater™* and

PerfectRiseLid™* are dishwasher-proof. Clean the motor unit with a damp cloth.

Place the appliance on a flat surface. Tilting the Motor head up: Move the Tilt head locking lever to “Unlocked” with one hand, tilt the Motor head up with the other hand. Once in up position it locks. Warning: Keep fingers and hands away from areas with movable parts.

Move Speed selector to “OFF”. Place the Stainless steel bowl on the bowl clamping plate. Move the bowl clockwise to lock into position. Warning: Never operate appliance with the attachments wire whip, Flat beater, Dough hook or

SoftEdgeBeater™* unless the bowl is in place, and the motor head is down.

Place an attachment on the Attachment shaft: Align the slot at the top of the attachment with the pin on the Attachment shaft. Push the attachment up and turn it counterclockwise until the pin is locked into position. To remove the attachment, move it clockwise and pull off.

Tilting the Motor head down: Move the Tilt head locking lever to “Unlocked” with one hand, tilt the Motor head down with the other hand. Insert the plug in the main socket.

Move the Speed selector from “OFF” to desired speed (1-10). Once mixing is complete, turn the Speed selector to

“OFF” and unplug the appliance.

Work light and Power indicator light: If the appliance is plugged in and a speed is selected, a blue LED lights up around the Speed selector. A working light will also light up over the working area. If the Speed selector is moved to

“OFF”, the working light will automatically shut off after 3 min.

Note: If the Speed selector is already turned on before the appliance is plugged in, both the blue Speed selector LED light and the Working light will flash OFF and ON to let you know the Speed selector has been left on. Turn the Speed selector to “OFF” and the lights will stop flashing. Then resume operating normally.

Caution: Never immerse the motor unit in water! Let all parts dry thoroughly.

How to use the coated SoftEdgeBeater™ * tool:

The SoftEdgeBeater™ is perfect for creamy mixtures and toppings. The silicone edges of the beater, gently wipes the sides on the bowl helping to incorporate all the ingredients in the mixture and to ensure even consistency throughout the mixing process.

Note: Do not use the coated SoftEdgeBeater™ * with heavy mixtures such as dough, use the dough hook tool instead. For hard ingredients like dry fruits, shells or bones use the coated flat beater instead.

How to use the PerfectRiseLid™ *:

The PerfectRiseLid™ isolates and helps to build up the humid environment for the dough to rise in proper condition.

Covering the bowl with the PerfectRiseLid™ keeps the dough from drying out, preventing the formation of a crust on the surface of the dough, which inhibits the proper rising of the dough which results in a poorer baking result.

How to use the Pulse function*:

If the machine is set to speed 1/P, you can temporarily stop the machine by pressing the “PULSE” button on the speed selector. Pressing it again will start the machine for 1,5 seconds. If you press continuously the machine will work as long as you keep the button pressed.

Attachment hub: The appliance comes with a built in multipurpose Attachment hub. Read and carefully follow the instructions that comes with each attachment for correct and safe use.

Adjusting the Attachment shaft: The appliance is adjusted at the factory so that the Flat Beater clears the bottom of the Bowl. If the Flat Beater hits the bottom of the Bowl or is too far away from the sides, you can adjust it correctly.

See 14 for further instructions.

Turn the Speed selector to “OFF” and unplug the appliance. Tilt the Motor head back. Use a slotted point Head screwdriver to adjust the screw. Turn counter clockwise to raise the Attachment shaft, turn clockwise to lower it.

Insert the grind screw (B) into the grinder housing (A). Place the knife (C) over the square shaft at the end of the grind screw. Place the grinding plate (D) (medium or coarse) over the knife. Tighten the ring (E) by hand until the meat grinder is secured.

Note: Do not over tighten the ring.

Open the Attachment hub lid on the Stand mixer. Fit the Power shaft of the attachment in the Attachment hub socket on the Stand mixer. Rotate the attachment back and forth if necessary. Tighten the Attachment hub knob until the attachment is fully fastened.

Caution: Before attaching accessories turn off the appliance and unplug it.

Place the food tray over the grinder housing. Cut raw meat into small pieces and place it on the food tray. Plug in the appliance and turn the speed selector to desired speed (recommended speed: 6-8). Feed the meat into the feed chute by using the pusher.

Caution: Do not put your fingers or other utensils in the feed chute. Note: Meat should not contain bones, muscles or skin.

How to use the Slicer/Shredder: Choose a Slicer or a Shredder knife (Medium or Course). Insert the shaft (square end) of the selected Knife into the Slicer/Shredder housing so the shaft fits into square hub socket. Secure the Knife by pulling the Locking handle downwards.

Caution: The blades and inserts are very sharp!

Assemble the Slicer/Shredder in the Attachment hub. Place a container under the attachment. Cut the food into small pieces. Plug in the appliance and turn the Speed selector to desired speed (recommended speed: 8).

Feed the food into the Feed chute by using the Pusher. When finished using your attachment, turn off the appliance and unplug it. Close the Attachment hub lid and tighten the Attachment hub knob.

Unplug the appliance. We recommend that the wire whip, meat grinder* and slicer/shredder* is washed by hand in warm soapy water.

The bowl, Flat beater, Dough hook, SoftEdgeBeater™* and PerfectRiseLid™* are dishwasher-proof. Clean the motor unit with a damp cloth. Caution: Never immerse the motor unit in water! Let all parts dry thoroughly.

Do not use abrasive cleaners or scouring pads when cleaning the appliance.

Enjoy your new AEG product!

AR FR GR NL PT SAFETY ADVICE Read the following instruction carefully before using the appliance for the first time.

• This appliance shall not be used by children. Keep the appliance and its cord out of reach of children. • Care shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning. • Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. • Children shall not play with the appliance. • The appliance may only be connected to a power supply whose voltage and frequency comply with the specifications on the rating plate! • Never use or pick up the appliance if – the supply cord is damaged, – the housing is damaged. • If the appliance or the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person, in order to avoid hazard. • Always place the appliance on a flat, level surface. • Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning. • Appliance is for indoor use only. • Do not immerse the appliance, cord or plug in water or any other liquid. • Do not let cord hang over edge of table or counter, do not let cord contact hot surface, including the stove. • Never use accessories or parts made by other manufactures not recommended or sold; may cause a risk of injury to persons. • Make sure the motor has completely stopped before disassembling and cleaning. • Avoid contact with moving parts. Contact could result in injury! Do not use other tools or utensils during the appliance usage. • Do not leave this product out of your sight when it is running. • Ensure all loose matters and your clothes/accessories are kept away while using this product. • Never process boiling liquids (max 90°C). • Do not use this appliance to stir paint. Danger, could result in an explosion! • Never operate appliance with the attachments wire whip, flat beater or dough hook unless the bowl is in place. • This appliance is intended for domestic use only. The manufacturer cannot accept any liability for possible damage caused by improper or incorrect use.

GB TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION The motor slows down during operation.

Amount of dough may exceed maximum capacity.

Remove half and process in two batches.

Dough may be too wet, it sticks onto the side of the bowl.

Add more flour, 1 tablespoon at a time until the motor speeds up. Process until dough cleans the side of the bowl.

The appliance is not connected to the mains.

Make sure to plug in the appliance before operation.

The motor does not work.

The appliance vibrates/moves The rubber feet are wet. during operation.

DE ES FA Make sure the rubber feet at the bottom of the unit are clean and dry.

It is normal for heavy loads (e.g heavy dough, cheese).

Remove half and process in two batches.

The attachment scrapes the

Stainless steel bowl during operation.

The height of the attachment shaft is incorrect.

Adjust the height of the attachment shaft.

The Working light and Power indicator light flashes on and off.

The Speed selector has been left turned on.

Turn the Speed selector to “Arrest”.

DISPOSAL This symbol on the product indicates that this product contains a battery which shall not be disposed with normal household waste.

This symbol on the product or on its packaging indicates that the product may not be treated as household waste. To recycle your product, please take it to an official collection point or to an AEG service center that can remove and recycle the battery and electric parts in a safe and professional way. Follow your country’s rules for the separate collection of electrical products and rechargeable batteries. AEG reserves the right to change products, information and specifications without notice.

FR GR NL PT RECIPES WHISKING FUNCTION QUANITITIES AND PROCESSING TIMES Ingredients

Use the wire whip tool.

BEATING FUNCTION QUANTITIES AND PROCESSING TIMES (MIXING LIGHT DOUGH (E.G: CAKE DOUGH))

dL Nougat raw mixture

The butter should be soft not hard. Stir the soft butter with sugar until creamy. Add the eggs one after another. While stirring, add the sour cream and vanilla sugar. Finally stir in the flour together with baking soda.

Note: Use the SoftEdgeBeater™* tool for creamier results.

Place all ingredients in the bowl, and mix them, till it is ready.

Note: Use the SoftEdgeBeater™* tool for creamier results.

Chocolate butter cream frosting

Semi-sweet chocolate chips

dL Sifted confectioners’ sugar

Melt chocolate chips over hot water; stir until smooth. Set aside; cool 15 minutes.

We recommend to use the SoftEdgeBeater™* tool instead of the coated flat beater tool. In large bowl, beat butter until creamy. Gradually add confectioners’ sugar, alternately with milk. Add melted chocolate and vanilla; beat until smooth.

HOOKS FUNCTION QUANTITIES AND PROCESSING TIMES Recipe

(bread)min. Quantities

Assemble the coated dough hook to mix the ingredients. Place all the ingredients into the bowl and knead until satisfactory. Cover the bowl with the PerfectRiseLid™* and let it rise.

(Pizza dough) max quantities

PT In a container mix half of the yeast with the salt and the sugar and set aside;

In the bowl add the remaining yeast with the water and the oil; This dough should be mixed with a whire whip tool, at minimum speed until a smooth mixture is obtained; Add into the bowl the fresh eggs and the preparation set aside in point 1 (the yeast mixed with salt and sugar). The speed should be increased to medium. Add half of the flour gradually. When the dough acquires a bigger volume and consistency change the tool to the coated dough hook tool. Add the rest of the flour and continue mixing. At this point you will need to monitor the input power of the machine, so that it doesn’t exceed setting 2.The dough should be mixed until it releases completely from the interior surface of the bowl. Cover the bowl with the PerfectRiseLid™* and let it rise.

*Do not exceed Speed 2 when preparing yeast dough. This may damage the machine.

• • • • • • • • • • • • • •

B. C. D. E. F. G. H. I. J. K.

L. M. N. O. P. Q. R. R.

B. C. D. E. F. G. H. I. J.

CONSUMABLES & ACCESSORIES www.aeg.com/shop

Express Slicer & Grater

Ref: AUM ES PNC: 900167704/7

Ref: AUM PR PNC: 900167751/8

Ref: AUM PSC PNC: 900167752/6 Meat Grinder Ref: AUM MG PNC: 900167703/9 Tagliatelle Cutter Ref: AUM PTC PNC: 900167753/4

Ref: AHP 01 PNC: 900168341/7