AS 3914 - Electric slicer SEVERIN - Free user manual and instructions
Find the device manual for free AS 3914 SEVERIN in PDF.
User questions about AS 3914 SEVERIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Electric slicer in PDF format for free! Find your manual AS 3914 - SEVERIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AS 3914 by SEVERIN.
USER MANUAL AS 3914 SEVERIN
Before using the appliance, the user should read the following instructions carefully.
Connection to the mains supply
The appliance should only be connected to an earthed socket installed in accordance with the regulations.
Make sure that the supply voltage corresponds with the voltage marked on the rating label of the appliance. This product complies with all binding CE labelling directives.
Familiarisation
- On/Off switch
- Thickness selection knob
- Cutting blade
- Central locking screw
- Sliding tray
- Power cord
- Rating label (on underside of the unit)
- End-piece holder with finger guard
- Stop plate
Important safety instructions
- Before the appliance is used, the main body as well as any fitted attachments should be checked thoroughly for any defects. If the appliance, for instance, has been dropped onto a hard surface, it must no longer be used: even invisible damage may have adverse effects on its operational safety.
- The power cord should be regularly examined for any signs of damage. In the event of such damage being found, the appliance must no longer be used.
- Do not allow the appliance to touch hot surfaces (e.g. oven-plates) or to come into contact with any open heat sources.
-
For safety reasons, always bring the stop plate to its rest (zero) position after use, so that it is flush with the blade.
-
Caution: the appliance should only be operated with the sliding tray and endpiece holder safely fitted and in operating position, unless the size or shape of the food to be cut makes this impossible.
- Do not use any accessories or parts other than those that accompany this appliance or those recommended by the manufacturer.
- This food slicer is not suitable for cutting frozen food.
- Caution: do not touch the blade while operating the appliance, and do not attempt to stop it while it is still turning.
- Do not allow the power cord to come into contact with the blade.
-
When removing the plug from the wall socket, never pull on the power cord; always grip the plug itself.
Always remove the plug from the wall socket -
after use,
- in case of any malfunction, and also
-
before cleaning the appliance.
-
This appliance is not intended for use by any person (including children) with reduced physical, sensory or mental capabilities, or lacking experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance. - No responsibility will be accepted if damage results from improper use, or if these instructions are not complied with.
- This appliance is intended for domestic use only and not for commercial applications.
- In order to comply with safety regulations and to avoid hazards, repairs of electrical appliances must be carried out by qualified personnel, including the replacement of the power cord. If repairs are needed, please send the appliance to one of our customer service departments. The address can be found in the
appendix to this manual.
Before using this appliance for the first time Clean the slicer before using it for the first time, or after a long period of non-use.
Applications
The slicer is designed for use with bread, cooked meats, ham, cheese, cold roasts and other food suitable for slicing.
Operation
Short-term operation
The appliance has been designed for shortterm operation only, i.e. the slicer should not be operated continuously for more than 10 minutes. Switch it off afterwards and allow the motor to cool down before switching on again
Positioning the slicer
- Position the slicer on a flat, stable surface.
- Before the appliance is connected to the mains, ensure that the On/Off switch is in the Off-position.
Slicing
Follow the above instructions when operating the slicer.
- Use the thickness selection knob to adjust the desired thickness of the slices.
- Place the food to be sliced onto the sliding tray and press it against the stop plate.
- Fit the safety holder, with the studded side facing the blade, onto the sliding tray.
- Switch the appliance on and move the sliding tray towards the rotating blade. At the same time, lightly press the endpiece holder with the food towards the blade.
- The end-piece holder ensures safe handling of the food while slicing.
- When removing the sliced food, keep fingers and hands well away from the
blade, which is extremely sharp.
Always switch the slicer off after use.
- For safety reasons, always bring the stop plate back to its rest position after use so that it is flush with the blade.
Practical hints
- When cutting a loaf of bread where the crust is thicker or harder on one side, it should be placed against the blade in such a way that the firm side faces the blade.
- When cutting cheese or very thin slices of other foods, use a slightly damp cloth to moisten the blade before cutting. This will make the slicing process easier.
- When cutting ham, ensure that the fatty side is facing upwards.
Cleaning and care
Clean the slicer before using it for the first time, or after a long period of non-use.
General
- To prevent perishable food particles from collecting in the slicer, clean it thoroughly after use.
- Always remove the plug from the wall socket before cleaning the slicer or detaching any accessories.
- Wait until the motor has come to a complete standstill. Bring the stop plate to its rest position so that the blade does not protrude.
- To avoid the risk of electric shock, do not clean the appliance with water and do not immerse it in liquid of any kind.
- Do not use abrasives or harsh cleaning solutions.
- The sliding tray can be folded out for easy access when cleaning the appliance.
- To clean the sliding tray, a damp, lint-free cloth and a mild detergent should be used.
- If necessary, the housing may be wiped with a slightly damp, lint-free cloth.
- The safety holder can be cleaned using hot water and a mild detergent (do not
put in a dish-washer).
Detaching and cleaning the blade
- Caution: the blade is extremely sharp; beware of injury.
The stainless-steel blade can be cleaned with a slightly damp, lint-free cloth.
The area behind the blade should also be cleaned occasionally, using a slightly damp cloth. To detach the blade, use a suitable coin to turn the central locking screw of the blade 90^ in a clockwise direction.
When re-fitting the blade, follow these instructions in reverse.
Disposal

Do not dispose of old or defective appliances in domestic garbage; this should only be done through public collection points.
Guarantee
This product is guaranteed against defects in materials and workmanship for a period of two years from the date of purchase. Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. This guarantee is only valid if the appliance has been used in accordance with the instructions, and provided that it has not been modified, repaired or interfered with by any unauthorised person, or damaged through misuse.
This guarantee naturally does not cover wear and tear, nor breakables such as glass and ceramic items, bulbs etc. If the product fails to operate and needs to be returned, pack it carefully, enclosing your name and address and the reason for return. If within the guarantee period, please also provide the guarantee card and proof of purchase.
Chere cliente, Cher client,
Bcerda BbIHMaIte BNJky H3 p03eTKN:
- HOCJIe HcIOJb3OBaHHa;
-
IIIO60I HEnOJaIke;
-песлочкий пнобopa. -
ΘTOTПрибор He Предиа3нayeh ДлЯ ИСПОЛБЗОВАнь 6e3 ПprсмOTpa JIИцамN (ВКЛЮчая DeTeи) с ОгразичЕНьIMN ФИЗЧЕСКИМN, СЕнсOPнБIMN ИЛN УМСТВЕНьIMN СПОСБHOCТЯМN, a TaKxe JINIaMn, He ОБlaДАЮПIMN ДОCTATOHbIM OПБITOM ИУМEHМ, ПOKA ЛИЦ, OTBeuaIOПпee 3a ИX 6e3ОПаСHOCТь, He obyuHT INx ОБразиЧЕНЮ с ДАнHBIMПрибОРМ.
He octabJIyTe JeTei 6e3 IprncMOtpa, YTO6bI OHN He NaaJIIN INrpaTb C IIpn6Opom. - I3rTOBHTeJIb He Hecet HnKaKoI OTBeTCTBeHHOCTH 3a IIOBpeJDeHne, BbI3BaHHoe HeIIpaBnJIbHOI 3KcIIyatauHeiHApUHeHEm HaCTOJIHX yKa3aHn.
-Данный прибор преднаЗнayен нСКЛЮЧИТЕЛБНО ДЛЯ ДOMaIIHе罗 ПриMuHeHЯ И He ДОЛжЕн ИСПОЛБ3OBaTbСЯВ KOMМерЧecКNX ПЕЛХ.
B coOTBeTcTBn c Tpe6oBaHnMaN IpaBJI TexHnKn 6e3OIIacHOCTn I JIA NCKJIIOUeHnRA BO3MOXHOrO TpaBMaTH3Ma peMOHT 3JIeKTPoIPnpOB, BKJIOUaYn 3aMeHy IHHypa IIITaHnY, IOJIKeH II pOnI 3B OД nIbT bCЯ KBaJIINΦNIINPOBAHHbIM IIepCOHaJIOM. EcJIn Heo6xOdM peMOHT, HaIIpaBbTe, IIOJaIyIcTa, 3JIeKTPoIPnpOB B OJHy I3 HauINx cepBnCHbIX cJyXb. AIIpeca yKa3aHbI B IIpNILOJKeHn K JaAHHomy pyKOBOIDCTBy.
Ipei IepBbIM IIpImeHHeM
Czech Republic / Slowak
Republic
ARGO spel. s r.o.
Zihobce 137
CZ 342 01 Susice
Tel.: +376597197
Fax: +376 597 197
Narva: CENTRALSERVICE,
Tallinna 6A, tel: 35 60 708
Haapsalu: Teco KM OÜ,
Jalaka 1A, tel: 47 56 900
Rakvere: Niri Tōnu FIE, tel: 32 40 515
Viljandi: Aaber OÜ,
Vabaduse pl. 4, tel: 43 33 802
Kuressaare: Toomas Teder FIE,
Pikk 1B, tel: 45 55 978
Bahar Administration and
Commercial Center
No. 668, 7th Floor, Ave.
South Bahar
TEHRAN - IRAN
Tel.: 009821-7516483
e-mail: info@iranseverin.com
Internet: www.iranseverin.com
Italia
via Dino Col 52r-54r-56r,
I - 16149 Genova
Green Number: 800240279
Tel.: 010/645 11 02 - 01041 86 09
Fax: 010/6425009
e-mail: videoelettronica@panet.it
Jordan
F.A. Kettaneh
P.O.Box 485
Amman, 11118, Jordan
Tel: 00962-6-4398642
e-mail: app@kettaneh.com.jo
Korea
Euko Trading
Namho B/D 3F, 194-6,
Neungpyeong-Ri
Opo.Eup, Gwangju-Si,
Kyunggi-do
Korea 464892
Tel: +82-31-714 5394
Fax: +82-31-714 8394
Service Hotline: 080-001-0190
Latvia
SERVO Ltd.
Mr. Janis Pivovarenoks
Tel: +371 7279892
servo@apollo.lv
Lebanon
The Right Angle S.A.L.
Boulos Building
Hazmieh- Damascus Highway
P.O.Box 1656-09
BEIRUT, Lebanon
Tel.: 05-952 162 and 3
Fax: 05-950 190
e-mail: rightangle@inco.com.lb
Luxembourg
Ser-Tec
"AJITbIH ΦpyH3eHcKn"
236016 KaJIiHnIHrpaI,
yJI.ΦpyH3e 15,
Tei.: (0112) 53 95 90
OOO Orbita-Service
123362 Moskau
ul. Svobody 18,
Tel.: (095) 491 31 06
OOO"Op6nTa-CepBnc"
123362, MockBa,
yJI.CB6oIbI,Ⅱ.18
Tei.: (095) 491-31-06
Romania
For Brands srl
Str. Capitan Aviator Alexandru
Serbanescu Nr. 33-35, Bl. 20E,
Sc. 2, Et.1, Ap.27, Sector 1,
Bucuresti.
Tel: +40 21 233 41 12
+40212334113
+40216886613
Fax: +40 21 233 41 03
+40216886613
E-mail: office@forbrands.ro
Web site: www.forbrands.ro
Schweiz
Serbia and Montenegro
tel: + 381-21-524-638
tel: +381-21-553-594
fax: +381-21-522-096
Finland
Oy Harry Marcell Ab
Rässitie 6, PL 63
01511 Vantaa