KH 1130 HAND-HELD MIXER - Hand blender BIFINETT - Free user manual and instructions

Brand	BIFINETT
Model	KH 1130
Product type	Electric hand mixer with immersion blender
Rated voltage	230 V ~ 50 Hz
Rated power	300 W
Protection class	II
Number of speeds	5 + turbo
Included accessories	2 stainless steel whisks, 2 stainless steel dough hooks, immersion blender, mixing bowl, scraper
Whisk material	Stainless steel
Hook material	Stainless steel
Use	Kneading, mixing, whipped cream, purée
Cleaning whisks and hooks	Dishwasher safe
Cleaning the housing	Damp cloth
Cleaning the immersion blender	Do not immerse, clean the lower part under running water
Warranty	3 years
Safety instructions	Do not touch accessories while operating; do not use for more than 10 minutes continuously
Cord fastening	Fixing clip for winding the cable

Frequently Asked Questions - KH 1130 HAND-HELD MIXER BIFINETT

How to use the immersion blender?

Open the safety device, push the immersion blender until it clicks and then screw it on. Only use the turbo button. Only start the blender after immersing it in the ingredients.

How to clean the whisks and hooks?

They can be washed under running water or in the dishwasher. Clean them immediately after use.

Can I crush ice cubes with this appliance?

No, the immersion blender should not be used for hard foods such as ice cubes, coffee beans, sugar, or raw potatoes.

What is the power of the appliance?

The rated power is 300 W at a voltage of 230 V ~ 50 Hz.

What to do if the appliance does not start?

Check that the plug is connected and the speed regulator is not set to 0. If the problem persists, contact customer service.

How to change the accessories?

Turn off the appliance and unplug it. Press the unlock button to remove the beater, then press the ejection button to release the whisks or hooks.

What is the warranty period?

The appliance is covered by a 3-year warranty from the date of purchase.

Can I use the appliance continuously?

Do not exceed 5 minutes of continuous use with the immersion blender, and never more than 10 minutes continuous for the beater.

How to wind the cable?

Use the provided fixing clip to wind and secure the cable.

How to scrape food from the bowl during mixing?

Turn off the appliance, then use the provided scraper to remove any dough or flour residue from the edges of the bowl.

USER MANUAL KH 1130 HAND-HELD MIXER BIFINETT

This Handmixer set is suitable for kneading dough, mixing liquids (e.g. fruit juice), whipping cream and for blending fruits. All other uses or modification of the set are not intended by the manufacturer and could entail risk of damage or injury.

List of parts.

① speed control
② mains cable and plug
③ insert appliance for blending rod
(4) release button for Handmixer
⑤ support
⑥ housing
⑦ base
⑧ stand
⑨ mixing bowl
忍 support release button
⑪ turbo button
② ejection key
③ blendingrod
④ stainless steel beater
⑤ stainless steel kneading hook
16 scraper
⑦ fixing clip

Important safety instructions

• Read the instructions for use carefully before using the appliance for the first time and keep these safely for subsequent use.
  Always ensure that any other person wishing to use the appliance first reads these instructions.
• Check whether the appliance is complete immediately when you have unpacked the set. Ensure that all parts are present and correct according to the list of parts.
• Never allow children play with or handle electrical appliances without supervision. Children cannot appreciate the grave risks of damage and injury resulting from incorrect handling.
• Never use the Handmixer outdoors. The appliance is intended exclusively for domestic and kitchen use.
  Make sure that the plug is disconnected after each use and before cleaning the appliance. Care must be taken that the device cannot be switched on accidentally.
  Always switch off the appliance before replacing the accessory parts.
• Examine the device and all parts for visible damage or faults. Full safety of the appliance can be guaranteed only when it is in perfect condition.

Warning:

Never switch on the device if parts are damaged or are missing. Serious damage and injury can otherwise occur.

Ensure that all repairs are carried out by a specialist.

In case of faults, please consult the service partner in your home country (see Guarantee).

Warning:

Avoid all contact with the beater blades, kneading hooks or the knife of the blending rod when the appliance is in

operation. Make sure that long hair, scarves, etc. never hang over the attachments. Carelessness can lead to serious injury!

• Never fix attachments with different functions to the appliance at the same time.
  Caution!

The knife on the blending rod is sharp. Care must therefore be exercised at all times when handling the rod.
The power cable must never come close to or in contact with hot parts of the appliance or other sources of heat. Never leave the mains lying on edges or corners.

Warning:

A damaged power cable can lead to electric shocks!

0 Device is switched off

1 Good starting speed for mixing "soft" ingredients, such as flour, butter, etc.
2 Best speed for mixing liquid ingredients
3 Ideal speed for mixing cake and bread dough
4 For creaming butter, sugar, deserts and sweets, etc.
5 For beating white of egg, cake icing, for mashing boiled potatoes, whipping cream, etc.

Turbo · Same speed as setting "5"

• This button puts the entire performance of your appliance at your disposal immediately.
• For operating the blending rod

Use of the appliance

Use of beater blades ④ and kneading hooks ⑤

Preparation

1. Clean the attachments (⑬, ⑭, ⑮) and the mixing bowl ⑨ before the first use.
2. Slide the beater blades ④ or kneading hooks ⑤ into the appliance until they are secure and you hear a distinct locking sound.

Always insert the kneading hook with the cogwheel into the intended opening in the Handmixer (indicated with a cogwheel).

1. Unlock the mixer support ⑤ by pressing the support release button ⑩ and fold the support upward (Fig. 2).
2. Remove the mixing bowl ⑨ and fill with ingredients according to the quantities required (Fig. ②).
3. Replace the mixing bowl ⑨ onto the appliance stand ⑧ .
4. Press the support release button ⑩ and fold the support ⑤ down.
5. Place the Handmixer onto the support ⑤.
6. Connect the plug ② to the mains.

Kneading/beater blades

1. To start the mixer, turn the speed control ① to the right. You can choose from between 5 speed settings or the turbo button ⑩ (see Chapter "Speed settings").
2. During the mixing operation, flour sometimes gets stuck to the mixing bowl. If this happens, always turn off the appliance immediately. Use the enclosed scraper ⑥ to

remove any remaining dough or flour from the side and edge of the bowl.

1. When you wish to remove the contents of the bowl, first switch off the Handmixer. Then press the support release button ⑩ , fold the support ⑤ upwards and take the mixing bowl ⑨ from the stand ⑧ .
2. Press the unlocking button ④ to remove the Handmixer and then press ejection button ② in order to release the beater blades ⑤ or kneading rods.

Use of the blending rod

Preparation

1. You will find the insert position for the blending rod at the back of the Handmixer ③ . This is covered for safety reasons. Before attaching the blending rod you must first open the safety device ③ .
2. Press the rod in until this locks into position and then twist until secure.

Blending

1. The blending rod ⑧ is operated exclusively with the turbo button ① (see Chapter "Speed settings"). Hold the turbo button ① down during use. As soon as you release this button the motor will stop.

2. In order to prevent overflowing, ensure that the blending vessel is never more than 23 full. We recommend a vessel of approx. 18 cm in height and with a diameter of approx. 11 cm.

3. To ensure that ingredients get ideally mixed, the material to be blended must cover at least the bottom section of the blending rod.

4. Do not switch on the mixer until you have lowered the rod into the material to be blended.
5. Never use the blending rod for hard materials, such as coffee beans, ice cubes, sugar, cereals, chocolate, raw potatoes, etc.
6. When you are finished using the Handmixer, return the speed control ① to the "0" position and disconnect the plug.
7. To clean the blending rod screw out of the inset position ②.
8. The enclosed fixing clip can be used for holding the power cable.

Caution!

1. Always allow the Handmixer to rest for a few minutes after every 5 minutes of constant use – in particular after using the blending rod ⑧ .
2. Never keep the appliance in constant operation for more than 10 minutes!
3. Never dip the blending rod ⑧ into water. Clean only the bottom part with knife under flowing water.

Cleaning

1. Make sure the plug is disconnected before cleaning the appliance.
2. Clean the housing ⑥ only with a damp cloth and if necessary with a mild cleaning agent.
3. Beater blades ④ or kneading hook ⑤ can be cleaned under running water or in the dishwasher.
4. We recommend that all attachments be cleaned directly after use. This will prevent food residues accumulating and remove the risk of germs.

Disposal

The packing consists of 100% environment-friendly materials, which you can dispose of at your local recycling points.

Please enquire from your local or municipal authorities regarding ways of disposing old household appliances.

Technical Data

Nominal voltage: 230V 50Hz

Nominal output: 300W

Protection class: II/回

This appliance is protected by a 3-year guarantee from the day it is purchased. This appliance was produced with great care and tested before leaving our factory. If, however, you discover any defects or functioning faults, please return the device with the original packing together with the sales receipt to the service address listed for your country.

Damage resulting from unprofessional treatment or handling and wear parts are not covered by this guarantee.

Beaver Electronic Services · The Lodge, Premier Business Park

Long Street, Walsall · West Midlands, WS2 9DY Tel.: [phone] · Fax: [phone]

IRL GUARANTEE

This appliance is protected by a 3-year guarantee from the day it is purchased. This appliance was produced with great care and tested before leaving our factory. If, however, you discover any defects or functioning faults, please return the device with the original packing together with the sales receipt to the service address listed for your country.

Damage resulting from unprofessional treatment or handling and wear parts are not covered by this guarantee.

Irish Connection Ltd · 8 St Mary's Place · Howth, Co. Dublin Tel [phone] · Fax: [phone]

F GARANTIE