CR65BT - Radio BLAUPUNKT - Free user manual and instructions

Product Type	Car Radio
Brand	Blaupunkt
Model	CR65BT
DIN Size	1 DIN (approx. 180 x 50 mm)
Weight	Approx. 0.5 kg
Power Supply	12V DC (negative ground)
Bluetooth	Yes, for hands-free calling and audio streaming
USB Port	Yes, front USB for playback and charging
AUX Input	Yes, 3.5 mm front AUX
Radio Tuner	FM/AM with RDS
Audio Formats	MP3, WMA, FLAC (via USB)
Max Power Output	4 x 50W max
Display	LCD with white illumination
Remote Control	Included
Steering Wheel Control	Compatible (adapter may be required)
Installation	Standard ISO connectors
Cleaning	Use soft dry cloth; avoid solvents
Security	Detachable faceplate for theft prevention
Spare Parts	Contact Blaupunkt service center

Frequently Asked Questions - CR65BT BLAUPUNKT

How do I pair my phone via Bluetooth?

Enable Bluetooth on your phone, then press the BT button on the radio until 'PAIR' appears. Select 'CR65BT' from your phone's list. Enter PIN 0000 if prompted.

What is the maximum USB drive size?

The radio supports USB drives up to 32GB formatted in FAT32.

Can I control the radio from my steering wheel?

Yes, if your vehicle supports steering wheel controls. You may need an adapter (e.g., PC99-x) for compatibility.

How do I reset the radio?

Press the RESET button on the front panel using a pointed object. This restores factory settings.

Why is there no sound from the speakers?

Check speaker connections, ensure the radio is not in mute mode, and verify the volume is turned up. Also check fuses.

Does it support Apple CarPlay or Android Auto?

No, this model does not support CarPlay or Android Auto. It offers basic Bluetooth and USB connectivity.

What is the warranty period?

Blaupunkt typically offers a 2-year warranty. Check your local dealer for details.

How do I clean the faceplate?

Use a soft, dry microfiber cloth. Avoid abrasive cleaners or alcohol to prevent damage to the display.

Can I connect a rear camera?

Some versions have a video input. Refer to the manual for pin assignment. An adapter may be needed.

How do I set the clock?

Press and hold the DISPLAY button until the hour flashes, then rotate the knob to adjust. Press again to set minutes.

USER MANUAL CR65BT BLAUPUNKT

Clock radio with Bluetooth

Important Notes

• Safety and operating instructions should be retained for future reference.
• The apparatus should not be exposed to dripping or splashing or placed in a humid atmosphere such as a bathroom.
• Do not install the product in the following areas:
• Places exposed to direct sunlight or close to radiators.
• On top of other stereo equipment that radiate too much heat.
• Blocking ventilation or in a dusty area.
• Areas where there is constant vibration. • Humid or moist places.
• Do not place near candles or other naked flames.
• Operate the product only as instructed in this manual.
• Before turning on the power for the first time, make sure the power adaptor is properly connected.

For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel.

Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel.

SAFETY INSTRUCTIONS

1. Read Instructions - All the safety and operating instructions must be read before the product is operated.
2. Retain Instructions - The safety and operating instructions should be kept with the product for future reference.
3. Heed warnings - All warnings on the product and in the operating instructions should be adhered to.
4. Follow instructions - All operating and users' instructions should be followed.
5. Installation - Install in accordance with the manufacturer's instructions.
6. Power sources - This product should be operated only from the type of power source indicated by the marking adjacent to the power cord entry. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
7. Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to train, dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool (or similar).
8. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Do not place any object containing liquid on top of the product.
9. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
10. Replacement parts - When replacement parts are required, ensure that the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
11. The highest environmental temperature suitable for this product is 35°C.
12. ESD hints - If the product maybe reset or not reset to operation of control due to electrostatic discharge, just switch off and reconnect again, or move the product to another location.
13. Battery

a. The batteries must not be exposed to excessive heat such as sunshine, fire or the like. b. The batteries should be drawn to the environmental aspects of battery disposal.

c. Battery usage CAUTION-to prevent battery leakage which may result in body injuries, property damage, or damage to the apparatus:

Install all batteries correctly, + and - as marked on the apparatus.

Do not mix batteries (old and new or carbon and alkaline, etc.)

Remove batteries when the unit is not used for a long time.

ERP2 (Energy Related Products) note

This product with ecodesign complies with the stage 2 requirements of Commission Regulation (EC) NO. 1275/2008 implementing Directive 2009/125/EC regard to standby and off mode electric power consumption of electronic household and office equipment.

WARNING

This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

1. Never use the device unsupervised! Switch off the device whenever you are not using it, even if this only for a short while.
2. The appliance is not intended to be operated by means of an external timer or separate remote control system.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
4. Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
5. To prevent fire or shock hazard, do not expose this equipment to hot places, rain, moisture or dust.
6. Do not place this unit close to a strong magnetic field.
7. Do not place the unit on an amplifier or receiver.
8. Do not place this unit in a damp area as the moisture will affect the life of electric components.
9. If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the player. If this occurs, the system will not operate properly. Please leave the system turned on for about an hour until the moisture evaporates.
10. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth.

NOTICE

Conformity

Hereby, Blaupunkt Competence Center 2N-Everpol Sp. z o.o., declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity can be obtained from the product page at www.blaupunkt.com.

Responsible party: 2N-Everpol Sp. z o.o, Puławska 403A, 02-801 Warsaw, Poland, Phone: [phone], E-mail: [e-mail]

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product, it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health.

Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Recording and playback of material might require consent. See Copyright Act 1956 and The Performer's Protection Acts 1958 to 1972.

Bluetooth™

The Bluetooth® wordmark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by us is under license. Other trademarks and trade names are those of their respective owners.

Many thanks for selecting our model. Please read and reference this manual carefully before operation. Please keep the manual for future operation reference.

Control locations

1- Set button; 2- Alarm button; 3- Dimmer/sleep button; 4- Display;

5- Volume - /Previous button; 6- Volume + /Next button;

7- Play/pause button; 8- DC IN jack; 9- Bass reflex; 10- Backup battery compartment;

11- Antenna; 12- Power/mode button; 13- Snooze button;

Power on clock radio

Insert the AC/DC adaptor into any 230V AC household outlet. Then insert the DC jack into the back of the unit. The display will light up and the unit will be ready to work. Long press (2 seconds) the power button to power off (display off) or on the radio. Short press it to switch play mode between FM, Bluetooth, and clock.

Backup battery installation

The radio requires 1 x CR2025 type battery (not included) to provide backup power for setting memory in the event of a temporary power interruption.

Place the unit face down on a flat and soft surface. Use a coin to turn the battery cover anticlockwise at the back of the unit. Insert one new CR2025 battery into the battery compartment, observing the “+” polarity facing upward. Replace the battery cover and turn it clockwise to lock it. The time and all settings will be kept in case of AC power interruption, as long as the backup battery is available.

Please dispose of the power-exhausted battery in an environmentally friendly way according to your local government requirements. Make sure a fresh CR2025 battery is used. A fresh battery can back up the clock continuously for around 3 weeks.

Display brightness adjustment/Dimmer: short press the dimmer button repeatedly to switch and select the display brightness between high, low, and off levels.

Clock time setting: short press the power button repeatedly to enter the clock time interface. Short press the set button to select 12/24 hour format. Long press (2 seconds) the set button to start the time setting procedure, and the hour digits will flash on the display. Press the previous/next button to adjust the desired hour, and press and hold it to accelerate the adjustment at high speed. Short press the play/pause button to confirm and skip to minute setting. Press the previous/next button to adjust it, then press the play/pause button to finish.

Alarm setting: short press the power button repeatedly to enter the clock time interface. Long press (2 seconds) the alarm1 button to start the alarm setting procedure, and the hour digits will flash on the display. Press the previous/next button to adjust the desired hour, and press and hold it to accelerate the adjustment at high speed. Short press the play/pause button to confirm and skip to minute setting. Use the same method to finish the rest of the settings for alarm1's minute, alarm source, and alarm volume (between 15~30 level) selection, and press the play/pause button to finish. Then the unit skips to alarm2 setting directly, which is the same operation as alarm1. Short press the alarm button repeatedly to turn on alarm1, alarm2, or both on the display. A relevant alarm icon will show on the right top corner of the display, which means the alarm is working now.

Alarm on/off: you need to turn on the alarm after finishing the alarm setting. Press the alarm button repeatedly to turn on or off alarm1 and alarm2. Please make sure the relevant alarm icon LED lights up on the display after your selection.

Alarm and snooze: When the unit is sounding due to the alarm time being reached, press the power button to cancel the voice, and it will wake up again at the same time the next day. If you short press the snooze button, the snooze function will activate. The alarm will silence temporarily and wake up again after 9 minutes. Long press (2 seconds) the snooze button to check the remaining snooze time on the display. Short press the power button to cancel the snooze function.

Note:

1. The unit will exit the clock or alarm setting mode if no key is pressed for approximately 5 seconds.
2. If your second alarm activates while the first alarm is sounding or is in snooze mode, the second alarm overrides the first alarm (the first alarm will reset to come on the next day).
3. The alarm only works when the DC/AC power adapter is connected. Please double-check the alarm setting in case of power interruption.
4. The alarm voice duration time is 1 hour. FM radio and buzzer are available to select as alarm source.

Radio operation

Before listening to the radio, please fully extend the antenna and move the unit next to the window in order to get better FM reception. Short press the power button repeatedly to enter radio mode; press and hold volume +/- to adjust the output volume level.

All-in-one scan (auto scan and save as preset stations): Long press (2 seconds) the play/pause button to scan and save the available stations automatically, max supported up to 60 preset stations. Short press the previous/next button to select and switch the preset station. Short press the play/pause button to mute the sound, press it again to resume the output.

Manual memory station: Short press the set button first, then press the previous or next button repeatedly and immediately to tune the available station step by step under 0.1MHz. When you tune to a favorite station, short press the set button immediately again, and the current station will be saved automatically. The preset station number will be sequenced automatically from low to high radio frequency.

Repeat the above operation to manually save other stations.

Remove noise or weak preset station: Long press the set button (2 seconds) to remove the current playing preset station, and the next preset will move forward and replace it.

Bluetooth operation

This product includes Bluetooth function which can wirelessly play music from other Bluetooth devices (like smart phones, tablets, etc.).

1. Short press the power button repeatedly to enter Bluetooth mode. The Bluetooth symbol will flash on the display, which means the unit is ready to pair.
2. Enable the Bluetooth function on your device, and search for available devices (please reference your device manual for operation). Then check the available Bluetooth devices on the

list. Select "BP CR65" for pairing. The Bluetooth symbol will become stable on the display after successful pairing.

1. Select and play music from your Bluetooth device. Press and hold the volume +/- button to adjust the volume level on the radio side, and adjust the volume level on your Bluetooth device. The sound will then play wirelessly from the speaker.
2. Press the previous/next button to select the last or next track. Press the play/pause button to play or pause playback. Long press (2 seconds) the play/pause button to disconnect the current Bluetooth device, but remain ready to pair with another device.

Notices:

1. Due to different designs and brands, not all Bluetooth devices are guaranteed to pair successfully.
2. The best working distance for Bluetooth is within 10 meters without any obstacles in between.
3. The unit can only pair and work with one Bluetooth device at a time.
4. In case of an incoming phone call during Bluetooth playback, the music will stop temporarily and resume after the call ends.

Sleep: In audio mode (FM radio or Bluetooth), long press (2 seconds) the sleep button repeatedly to switch the sleep time between 5/10/15/30/60/off. Select your desired sleep time and keep it for a while to activate the sleep function. The unit will turn off and switch to standby mode automatically when the sleep time elapses. Press and hold the sleep button to check the remaining sleep time on the display.

Troubleshooting

1. The speaker cannot turn on.

a. Please check if the power connection is correct.

2. No sound output.

a. Please try to adjust the volume knob and check the play source. b. Please contact the service center for support if the issue remains.

3. Background noise on FM station.

a. Try to move the unit to another place for better reception. b. Scan and switch to another station for listening.

4. Intermittent sound output in Bluetooth mode

a. Please try to move your Bluetooth device closer to the radio. b. Please refer to the manual for re-pairing.

5. The sound output is too small in Bluetooth mode.

a. Please check the volume level on both your Bluetooth device and the radio.

Specification

Power source: DC IN 5V/1.2A

FM frequency: 87.5~108.0MHz

Bluetooth version: V5.0

Backup battery power: CR2025, 3V/150mAh (not included)

Power consumption: 5W

Standby power consumption: <1W

Alarm duration: 1 hour

Snooze duration: 9 minutes

Default settings:

Time: 24-hour format

Alarm 1 and 2: 7:00 AM (OFF)

(The above specifications may change without prior notice.)

Power adaptor information
Information published	Value and precision	Unit
Manufacturer's name or trade markCommercial registration number Address	Shenzhen Fushigang Technology Co., LtdBuilding 8, Shiguan Industrial Park,Shangcun Community, GongmingStreet,Guangming District,Shenzhen,GuangDong,China,Guangdong,China
Model identifier	AS0601A-0501200EUL
Input voltage	100-240	V
Input AC frequency	50/60	Hz
Output voltage	DC5	V
Output current	1.2	A
Output power	6.0	W
Average active efficiency	≥75	%
Efficiency at low load (10 %)	68%	%
No-load power consumption	≤0.1	W

Important information

Alarm 1 and 2: 7:00 (OFF)

FM frequencies: 87.5–108.0 MHz

Bluetooth version: V5.0

"Alarm 1" and "Alarm 2": 7:00 (OFF)

02-801 Warsaw, Poland

Phone: [phone]

E-mail: [e-mail]

www.blaupunkt.com

In case of questions or problems

please contact our service.

Tel. [phone]

E-mail: [e-mail]

Enjoy it.

All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.