PP5.2CR - Radio BLAUPUNKT - Free user manual and instructions

Product Type	Portable Radio
Brand	Blaupunkt
Model	PP5.2CR
Dimensions (W x H x D)	200 x 120 x 80 mm
Weight	0.5 kg
Power Source	AC 230V, 50Hz or 6 x AA batteries
Tuning Range	FM 87.5-108 MHz, AM 520-1710 kHz
Output Power	2 x 2W RMS (stereo)
Display	LCD with clock
Functions	Radio, Alarm, Sleep Timer, Headphone Jack
Antenna	Built-in ferrite for AM, telescopic for FM
Audio Input	AUX 3.5mm
Cleaning	Wipe with dry cloth
Safety	Keep away from water, do not disassemble
Spare Parts	Not available separately
Repair	Contact service center

Frequently Asked Questions - PP5.2CR BLAUPUNKT

How do I set the alarm?

Press the Alarm button, then use the + and - buttons to set the time. Confirm with Alarm again.

How to improve FM reception?

Extend the telescopic antenna fully and rotate it for best signal. For AM, rotate the unit itself.

Can I use batteries?

Yes, insert 6 AA batteries (not included) into the battery compartment. The radio switches to battery power automatically when unplugged.

How to clean the radio?

Use a soft, dry cloth. Do not use any liquids or cleaners, as they may damage the device.

What are the dimensions?

Approximately 200 x 120 x 80 mm (width x height x depth). Weight is about 0.5 kg.

Does it have a headphone jack?

Yes, there is a 3.5 mm headphone jack on the side. Inserting headphones mutes the speakers.

How to set the sleep timer?

Press the Sleep button repeatedly to select a time (15, 30, 60, 90 min). The radio will turn off automatically.

Can I connect external devices?

Yes, you can connect an MP3 player or phone via the AUX input using a 3.5 mm cable.

What is the power voltage?

The radio operates on AC 230V, 50Hz. For battery operation, use 6 x 1.5V AA batteries.

Where can I get spare parts?

Spare parts are not sold separately. For repairs, contact an authorized Blaupunkt service center.

USER MANUAL PP5.2CR BLAUPUNKT

• This safety and operating instruction should be retained for future reference. • The apparatus should not be exposed to dripping or splashing or placed in a humid atmosphere such as a bathroom. • Do not install the product in the following areas: - Places exposed to direct sunlight or close to radiators. - On top of other stereo equipment that radiate too much heat. - Blocking ventilation or in a dusty area. - Areas where there is constant vibration. • Humid or moist places. • Do not place near candles or other naked flames. - Operate the product only as instructed in this manual. • Before turning on the power for the first time, make sure the power adaptor is properly connected.

For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel.

Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel.

SAFETY INSTRUCTIONS

1. Read Instructions - All the safety and operating instructions must be read before the product is operated.
2. Retain Instructions - The safety and operating instructions should be kept with the product for future reference.
3. Heed warnings - All warnings on the product and in the operating instructions should be adhered to.
4. Follow instructions - All operating and users' instructions should be followed.
5. Installation - Install in accordance with the manufacturer's instructions.
6. Power sources - This product should be operated only from the type of power source indicated by the marking adjacent to the power cord entry. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
7. Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to train, dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool (or similar).
8. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Do not place any object containing liquid on top of the product.
9. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
10. Replacement parts - When replacement parts are required, ensure that the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
11. The highest environmental temperature suitable for this product is 35°C.
12. ESD hints - If the product resets or fails to operate due to electrostatic discharge, simply switch it off and reconnect it, or move the product to another location.

ERP2 (Energy Related Products) note

This product with ecodesign complies with the stage 2 requirements of Commission Regulation (EC) No. 1275/2008 implementing Directive 2009/125/EC regarding standby and off mode electric power consumption of electronic household and office equipment.

WARNING

This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

1. Never use the device unsupervised! Switch off the device whenever you are not using it, even if only for a short while.
2. The appliance is not intended to be operated by means of an external timer or separate remote control system.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
4. Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
5. To prevent fire or shock hazard, do not expose this equipment to hot places, rain, moisture, or dust.
6. Do not place this unit close to a strong magnetic field.
7. Do not place the unit on an amplifier or receiver.
8. Do not place this unit in a damp area as the moisture will affect the life of electric components.
9. If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the player. If this occurs, the system will not operate properly. Please leave the system turned on for about an hour until the moisture evaporates.
10. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth.

NOTICE

Conformity

Hereby, Blaupunkt Competence Center 2N-Everpol Sp. z o.o., declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity can be obtained from the product page at www.blaupunkt.com.

Responsible party: 2N-Everpol Sp. z o.o, Puławska 403A, 02-801 Warsaw, Poland, Phone: [phone], E-mail: [e-mail]

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health. Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and poly ethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Recording and playback of material might require consent. See Copyright Act 1956 and The Performer's Protection Acts 1958 to 1972.

Thanks for purchasing our mini audio system product; this unit has included FM Radio, USB playback, aux in and time function. Please read the operation manual carefully in order to better enjoy the music.

Control locations:

1- Display

4- Previous

7- Play mode

10- Power switch

13- Auxiliary input

2- Volume adjustment knob

5-IR sensor

8- Next

11-5V DC jack

14- Earphone output

3- Play/pause

6- Tuning knob

9- FM antenna

12- USB port

1- Play mode

2- Standby

3- Play/pause

4- FM auto scan

5- Digits keyboard

6- Repeat button (repeat one/repeat folder/repeat all/random)

7- Mute

8- Previous/next

9- Volume up/down

10- FM radio

Note: Please remove the battery (CR2025) insulation sheet before using the remote controller; the best working distance is within 5 meters without obstacle in between; please try your best to aim the IR sensor during operation.

Power setting and battery charging.

There have built in rechargeable battery inside of this unit. Before play the speaker, please follow up below step to charge the unit first.

1. Using the supplied USB cable to connect the DC 5V jack on the rear panel, and another terminal connect with supplied USB DC power adaptor. Then plug on the DC power adaptor to AC power source.
2. During the charging, the rear panel red LED indicator will turn on, and will off after be fully charged (2\~3 hours charging time).
3. During the battery power playback mode, the unit will stop play and display off when the power is too low. Please connect power for re-charging and playing.

Note:

Your battery will last longer if you following these simple guidelines for charging and storing.

a. For charging first time, charge it at least 10 hours. And the battery will provide the best performance after fully charge and discharge 3 times. It is better to charge the unit after discharge completely, otherwise there may affect the battery's lifetime.

b. Recharge and store the unit within the temperature range of 5°C\~35°C (40°F\~95°F).

c. Do not charge (longer than 24 hours). Excessive charging or discharging may shorten the battery's life. d. Due to prolong charging and discharging, the unit battery life will be affected and playback will be shorten. We cannot guarantee the same playback consistently throughout and this is not include in our warranty and service. e. During charging, you can play the music at the same time. f. Please do not use it under the high humidity and temperature environment for long time. g. Please turn off the speaker if long time not to use.

Unit power on

Slide the power switch to "on" position on rear panel to power on the unit, and slide to off position to power off (display off). Short press the power button on remote controller to standby on/off the unit. In case of you off the unit by side the power switch on rear panel that you cannot power on the unit by remote controller because the power is cut off completely.

Time setting

Press the mode button repeatedly until enter to clock time interface. Long press (2 seconds) the mode button until hour's digits flare on display, rotate the volume knob to adjust the hour setting, short press mode button to confirm and skip to minute setting, rotate the volume knob to adjust it and press the play/pause button to finish the time setting.

If you power off the unit using the remote control, the clock time will be displayed for 15 seconds and then disappear automatically. To check the time, briefly press any button on the panel or remote control (except the power button), and the clock time will be shown for 10 seconds.

Note: The clock time may reset if the battery is exhausted and there is no DC power connection. You may need to set it again after charging.

FM RADIO

Before FM reception, extend the telescopic FM antenna as far as possible. Place the unit near a window for better reception. If FM reception is poor, try moving to another location.

FM play: Slide the power switch to the "on" position on the rear panel to power on the unit. "HI" will appear on the display, and it will switch to FM mode directly. Press and hold the play/pause button for 3 seconds to auto-tune and save FM stations automatically. It supports up to 60 preset stations. Briefly press the previous or next button to select and play the previous or next preset station. Press and hold the previous or next button to auto-scan available FM stations in the backward or forward direction. Briefly press the play/pause button to mute the unit. Rotate the volume knob to adjust the output volume; maximum volume is 30, and default volume is 18. Rotate the tuning knob to adjust the FM frequency in 0.1 MHz steps.

FM operation via remote control: Briefly press the FM scan button to start auto-scan and station preset function automatically; press it again briefly to stop auto-scan and play the first preset station. Briefly press the previous button to decrease FM frequency by 0.1 MHz per step; press and hold the previous button to auto-scan backward and stop when an available station is found. Briefly press the next button to increase FM frequency by 0.1 MHz per step; press and hold the next button to auto-scan forward and stop when an available station is found.

You can enter 1 or 2 digits using the remote control's number buttons to select and play preset stations. For example, if there are 20 preset stations stored, pressing 1 and 5 will display 0015, then switch to "P15" and play that station. If you enter 3 or 4 digits, the unit will play the corresponding FM frequency between 87.5-108 MHz. For example, entering 1043 will display 1043 and play the FM station at 104.3 MHz.

USB playback operation

Before starting USB playback, insert the USB drive into the corresponding slot on the rear panel. The unit will only detect and play the USB when a device is present in the slot. Slide the power switch to the "on" position on the rear panel to power on the unit. The unit will read and play the USB device automatically after showing "HI" on the display. While in USB mode, short press the play/pause button to control play/pause; short press the previous/next button to select the previous or next track; press and hold the previous/next button for fast backward or forward selection, and resume play after releasing the button.

Notes:

a. Do not use an extended USB cable for connection and playback, as this will affect signal transfer from the device and may cause intermittent sound. b. The unit supports MP3 up to 320 kbps and WAV up to 192 kbps. It supports USB drives with a maximum capacity of 32GB. c. Short press the repeat button on the remote control to choose repeat mode: repeat one track, repeat folder, repeat all, or random play.

Fast selection: Press the digits 0-9 on the remote control to choose a song. Input 2 digits if there are more than 10 tracks saved on the device; input 3 digits if there are more than 100 tracks. For example, to play track number 105, press 1, 0, and 5 on the remote control, then 0105 will be displayed and played.

AUX IN and headphone.

Using the supplied 3.5mm audio cable, plug one end into the AUX IN jack on the rear panel, and connect the other end to another audio player. Power on the unit or press the mode button to switch to AUX mode. Select music from your player device and play. The sound will output from the speaker. You can use the volume up/down, MUTE, play, and pause functions in AUX mode.

In any play mode, if you insert headphones into the headphone jack on the rear panel, there will be no sound output from the speaker, but sound will be output through the headphones.

SPECIFICATION

Input: FM radio, AUX in, USB

FM frequency range: 87.5 \~ 108 MHz.

USB: 2.0 version

USB max supported capacity up to: 32GB.

Output RMS power: 1.5W x 2

DC IN: 5V/0.6A

Battery: 3.7V/1000mAh lithium battery

Battery playback time: 3-4 hours.

Charging time: 2~3 hours.

Power consumption: 5W.

Standby power consumption: < 0.5 W.

Troubleshooting.

a. No sound output

There is no power in the battery. Please reference the manual and connect the power source for charging.

Please power off the unit and power on again.

b. Cannot get USB play mode.

Please double check if you have inserted the USB on the rear panel already.

c. FM reception is not good.

Please extend the antenna as long as it can be. Please move the unit to another place for reception.

d. The remote control does not work properly.

Please use the remote control straight directly to the front display and move close for control.

Important information

02-801 Warsaw, Poland

phone: [phone]

e-mail: [e-mail]

www.blaupunkt.com

In case of questions or problems

please contact our service.

Tel. [phone]

E-mail: [e-mail]

All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.

Enjoy it.