KR12SL - Radio BLAUPUNKT - Free user manual and instructions

Product Type	Portable Radio
Brand	Blaupunkt
Model	KR12SL
Dimensions (Approx.)	180 x 120 x 60 mm
Weight (Approx.)	0.5 kg
Power Supply	AC 230V 50Hz or 2 x AA batteries
Frequency Range	FM 87.5-108 MHz, AM 520-1710 kHz
Speaker	Built-in 3-inch speaker
Output Power	2W RMS
Functions	FM/AM radio, telescopic antenna, headphone jack, volume control, tuning knob
Display	Analog tuning dial
Color	Silver / Black
Material	Plastic
Maintenance	Clean with a dry, soft cloth. Do not use liquids.
Safety	Do not expose to moisture or extreme temperatures. Unplug during storms.
Spare Parts	Standard accessories included; contact service center for replacements.
Reparability	Refer to authorized service center for repairs.
Warranty	1 year limited warranty (check local regulations)

Frequently Asked Questions - KR12SL BLAUPUNKT

How do I tune the radio to a station?

Turn the tuning knob slowly until you find a station. For FM, extend the telescopic antenna fully for best reception.

Can I use batteries with the KR12SL?

Yes, the radio can be powered by 2 x AA batteries (not included). Insert them with correct polarity.

How do I improve FM reception?

Fully extend the telescopic antenna. If indoors, try near a window. Avoid metal objects near the antenna.

Does the radio have a headphone jack?

Yes, there is a 3.5mm headphone jack on the side for private listening.

How do I clean the radio?

Use a dry, soft cloth to wipe the exterior. Do not use water or cleaning chemicals.

Why is there static on AM?

AM is more prone to interference. Try rotating the radio or moving it away from electronic devices.

What is the power consumption?

When plugged in, the radio consumes approximately 5W. It is energy-efficient.

Is the radio suitable for outdoor use?

It is designed for indoor use. Avoid exposure to rain or excessive humidity.

Can I connect external speakers?

No, the KR12SL does not have a line-out. It only has a headphone jack for personal listening.

What should I do if the radio doesn't turn on?

Check if batteries are inserted correctly or if the AC plug is securely connected. Try replacing batteries or testing a different outlet.

USER MANUAL KR12SL BLAUPUNKT

• This safety and operating instruction should be retained for future reference. • The apparatus should not be exposed to dripping or splashing or placed in a humid atmosphere such as a bathroom. • Do not install the product in the following areas: - Places exposed to direct sunlight or close to radiators. - On top of other stereo equipment that radiate too much heat. - Blocking ventilation or in a dusty area. - Areas where there is constant vibration. • Humid or moist places. • Do not place near candles or other naked flames. - Operate the product only as instructed in this manual. • Before turning on the power for the first time, make sure the power adaptor is properly connected.

For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified personnel.

Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside. Refer all servicing to qualified service personnel.

SAFETY INSTRUCTIONS

1. Read Instructions - All the safety and operating instructions must be read before the product is operated.
2. Retain Instructions - The safety and operating instructions should be kept with the product for future reference.
3. Heed warnings - All warnings on the product and in the operating instructions should be adhered to.
4. Follow instructions - All operating and users' instructions should be followed.
5. Installation - Install in accordance with the manufacturer's instructions.
6. Power sources - This product should be operated only from the type of power source indicated by the marking adjacent to the power cord entry. If you are not sure of the type of power supply to your home, consult your product dealer or local power company.
7. Water and moisture - To reduce the risk of fire or electric shock, do not expose the product to train, dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool (or similar).
8. Object and Liquid Entry - Never push objects of any kind into this product through openings, as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Do not place any object containing liquid on top of the product.
9. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
10. Replacement parts - When replacement parts are required, ensure that the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
11. The highest environmental temperature suitable for this product is 35°C.
12. ESD hints - If the product resets or fails to operate due to electrostatic discharge, simply switch it off and reconnect it, or move the product to another location.

ERP2 (Energy Related Products) note

This product with ecodesign complies with the stage 2 requirements of Commission Regulation (EC) No. 1275/2008 implementing Directive 2009/125/EC regarding standby and off mode electric power consumption of electronic household and office equipment.

WARNING

This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

1. Never use the device unsupervised! Switch off the device whenever you are not using it, even if only for a short while.
2. The appliance is not intended to be operated by means of an external timer or separate remote control system.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
4. Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
5. To prevent fire or shock hazard, do not expose this equipment to hot places, rain, moisture, or dust.
6. Do not place this unit close to a strong magnetic field.
7. Do not place the unit on an amplifier or receiver.
8. Do not place this unit in a damp area as the moisture will affect the life of electric components.
9. If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the player. If this occurs, the system will not operate properly. Please leave the system turned on for about an hour until the moisture evaporates.
10. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth.

NOTICE

Conformity

Hereby, Blaupunkt Competence Center 2N-Everpol Sp. z o.o., declares that this equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity can be obtained from the product page at www.blaupunkt.com.

Responsible party: 2N-Everpol Sp. z o.o, Puławska 403A, 02-801 Warsaw, Poland, Phone: [phone], E-mail: [e-mail]

Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environment and human health. Environmental information

All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Recording and playback of material might require consent. See Copyright Act 1956 and The Performer's Protection Acts 1958 to 1972.

RISK OF ELECTRIC SHOCK DO NOT OPEN

Caution:

To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.

Explanation of Graphical Symbols:

The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to a person or persons.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

Many thanks for purchasing our model. Please read and reference the manual before operating this unit. Please keep the manual for future operation reference.

Location of controls:

1-Volume/on/off; 2- Timer1/2/Dimmer; 3- Alarm/memory/AMS(scan); 4- Display; 5-Stereo/mono/light on/off; 6-Preset-/search - ; 7- Preset +/search +/setup ; 8-Timer ; 9-Foldable stand ; 10-Battery compartment ; 11-Speaker 12-Power cord : 13-FM antenna

Install backup battery power: push out the battery compartment door (at the bottom of unit), insert 2 AA size batteries (not included). Make sure that the inserted battery is in correct position according to the engraved positive and negative polarity symbol. The battery power is used to backup clock and alarm setting only.

Note:

a. Please dispose of the battery in an environmentally friendly way, and follow the requirements of your local government. b. Do not mix battery brands when installing; remove the battery if the unit will not be used for a long time to avoid leakage.

Using the unit on a table: Place the unit on a flat table. Pull out the stand for a better viewing angle and adequate space for sound, as the speakers are located at the bottom of the unit.

Wall-mounting the unit

Important: Only use the mounting accessories (included) when mounting the unit. Using unapproved accessories not designed for this unit may cause safety hazards.

a. Retract the bottom stand before mounting. Use the provided cabinet mounting template to mark the desired location. Drill the mounting holes, then remove the template. To reduce risk, consult a technician if you are unsure whether the mounting surface is strong enough to support the unit safely.

b. Push out the mounting plate (see illustration (a)). c. If the unit is mounted too high to reach, use the supplied long plastic poles. Insert them into the position holes (see illustration (b)). d. Position the mounting plate and secure it with the supplied screws. e. Slide the unit back onto the mounting plate.

Caution: To reduce the risk of fire, do not place any heating or cooking appliances beneath this unit.

A

B

Power connection and turning on the unit: Uncoil the attached power cable, then insert the plug into a household AC wall socket to supply power. The display will light up, and the unit will automatically scan and save available FM stations. Briefly press the ON/OFF knob to switch the unit to standby or on.

Clock time setting: In standby mode, press and hold the setup button for 2 seconds until "24H" flashes on the display. Rotate the timer knob to select the time format (12 or 24 hours). Press the setup button again to confirm and move to hour setting. Repeat the process to set minutes, year, month, day, RDS, and auto dim on/off.

Clock time synchronization via RDS: When RDS is enabled, a clock icon will appear below the time on the display. The clock can update automatically when a time signal is received from a broadcasting radio station.

Alarm setting: In standby mode, press and hold the alarm button for 2 seconds until the hour digit flashes. Rotate the timer knob to adjust the hours, then press the alarm button again to confirm and move to minute setting. Repeat to set minutes and alarm source (radio/buzz/off).

Note:

a. The unit will revert to standby mode automatically if there is no further operation for the last 10 seconds. b. The alarm will be activated when the alarm time is reached. Short press the ON/OFF knob to cancel the alarm voice, and the alarm setting will remain, and it will wake up again at the same time the next day.

Countdown time setting for cooking: the unit includes 2 set countdown timers (T1 and T2) which are useful for cooking. The unit will alert by buzzer when the set time is reached. In standby mode, rotate the timer knob to adjust timer 1 range between 1 minute to 3 hours 59 minutes, press down the timer knob to confirm the setting, then the T1 icon and countdown time information will show on display; short press the Timer 1/2 button until the T2 icon flashes on display, and rotate the timer knob to adjust timer 2's setting range between 5 minutes to 3 hours 55 minutes, press down the timer knob to confirm it. Then timer 2 will start to work.

Note:

a. The time format will be shown as "MM:SS" on display if the setting is less than 5 minutes; and switch to "HH:MM" format if the setting is equal to or above 5 minutes. b. The unit will send a short alarm each when the remaining countdown time reaches 30s, 15s, 10s, 5s; and become continuous alarming when the time is reached; short press down the ON/OFF knob to cancel the alarm. c. When only one countdown time is set up, no matter whether it is Timer1 or Timer2, press and hold the timer knob can cancel it; short press the Timer1/2 button twice, then press and hold the timer knob can cancel the Timer2 setting when both Timer1 and Timer2 were set up.

Radio operation

Before listening to the radio, please fully extend the tail antenna in order to get better reception. Rotate the volume knob to adjust the output level for listening. In case of noise output in station, you can try to switch mono or stereo mode (long press mono/stereo button) for clear sound listening.

Scan and all-in-one scan: press and hold the search +/- button for 2 seconds to auto scan the available station in upward or downward frequency, the unit will stop and broadcast the available station; press and hold the AMS button for 2 seconds to scan and save the available station automatically (max support up to 20 stations); short press the preset +/- button to switch the preset station. The unit also can scan and save available station automatically when you connect power first time.

Station manual memory: when you tune a favorite station by scanning, short press the memory button first, press preset +/- to select the preset station number you desire to save, short press the memory button again to confirm it; then the current station will be saved.

Display brightness adjustment: press and hold the dimmer button for 2 seconds to adjust the display brightness between high and low. When the display is at low level, pressing any button will light it up for 10 seconds and then turn off automatically. Auto dim: if you select DT ON during clock time setting (a DT icon shows on the display), the display will auto dim between 23:00~5:00.

LED light: short press the light on/off button to turn on or off the LED light. The light will stay on for 120 minutes and then turn off automatically in case you forget to turn it off.

Specification

Power source: AC 230V ~50Hz

Backup battery power: 2 x AA size (not included)

FM frequency range: 87.5 ~108.0MHz

RMS output power: 2 x 0.8W

Power consumption: 10W

Standby power consumption: < 1W

Unit dimension: 260 x 156 x 522 (L/D/H)

(The above specifications may change without prior notice)

Important information

A

B

A

B

A

B

A

B

A

B

A

B

02-801 Warsaw, Poland

phone: [phone]

e-mail: [e-mail]

www.blaupunkt.com

In case of questions or problems

please contact our service.

Tel. [phone]

E-mail: [e-mail]

All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.

Enjoy it.