Runway Fit - Earphones SBS - Free user manual and instructions

Product type	Wireless earbuds
Brand	SBS
Model	Runway Fit
Dimensions (earbud)	Approximately 2.5 x 1.8 x 1.5 cm
Weight (per earbud)	Approximately 5 g
Charging case dimensions	Approximately 6 x 4 x 2.5 cm
Case weight	Approximately 35 g
Power supply	Rechargeable lithium-ion battery via USB-C
Battery life	Up to 6 hours of listening, 24 hours with case
Charging time	Approximately 2 hours for earbuds, 3 hours for case
Connectivity	Bluetooth 5.0
Main functions	Music playback, hands-free calls, touch controls, passive noise reduction
Noise reduction	Passive (sound isolation)
Water resistance	IPX5 (splash resistant)
Maintenance and cleaning	Clean with a soft, dry cloth. Do not use harsh liquids.
Safety	Do not expose to extreme temperatures. Avoid immersion in water.
Spare parts	Replacement ear tips available, USB-C cable
Repairability	Not user-repairable (built-in battery). Contact customer service.
Package contents	Earbuds, charging case, USB-C cable, 3 pairs of ear tips, manual
Warranty	2 years (according to applicable legislation)

Frequently Asked Questions - Runway Fit SBS

How to pair the Runway Fit earbuds with my phone?

Open the charging case, the earbuds enter pairing mode. Enable Bluetooth on your phone and select "SBS Runway Fit" from the list. A voice confirms the connection.

How long does the battery of the earbuds last?

The earbuds offer up to 6 hours of continuous listening. The charging case provides an additional 24 hours. Recharge via USB-C.

How to clean the Runway Fit earbuds?

Use a soft, dry cloth to wipe the earbuds and case. Do not use alcohol or chemicals. Remove the ear tips to clean them separately.

Are the earbuds water-resistant?

Yes, they have an IPX5 certification, which protects against splashes and sweat. Do not immerse them in water.

What to do if only one earbud is not working?

Place both earbuds in the case, close it, wait 10 seconds, then reopen. They will resynchronize automatically. Reset if necessary.

How to reset the Runway Fit earbuds?

Keep both earbuds in the case, then press and hold the touch sensors for 10 seconds until the LEDs flash red and white. Release, they are reset.

Can I use the earbuds for phone calls?

Yes, the earbuds are equipped with a built-in microphone for hands-free calls. Audio quality is clear thanks to ambient noise reduction.

What music formats are supported?

The earbuds stream all common audio formats (MP3, AAC, FLAC, etc.) via Bluetooth. No specific format is limited.

How to change the ear tips?

Gently pull on the existing ear tip to remove it. Align the new ear tip on the nozzle and push until it clicks. Make sure it is securely attached.

Where can I find spare parts?

Contact SBS customer service or check the product page on the official website. Replacement ear tips and USB-C cables are available.

USER MANUAL Runway Fit SBS

Runway Fit Bluetooth Headphone

Handsfree with foldable headband

UK 4

I 8

D 12

F 16

ES 20

P 24

NL 28

RUS 32

SWE 36

PL 40

GR 44

TR 48

LV 52

EE 56

LT 60

BG 64

ARA 68

UK

User Manual

Safety Precautions

1 Please read, follow and keep these instructions.
2 Heed all warnings on the product and instructions for use.
3 Stop to use this product immediately if it confers discomfort or pain. In use, it is recommended to keep the volume at a level that is not harmful to your ears and that will allow you to hear ambient noise.
4 Keep the unit away from heat and moisture.
5 Do not use near water such as faucets, fountains, swimming pools, washing machines etc.
6 Use earphones while driving may cause distraction and increase the likelihood of accidents.
7 Battery life may vary depending on the type of use.
8 CAUTION: To prevent possible damage to the ears do not listen at high volume!

Content

• Bluetooth Stereo Headset model TESPORTHEADPHBTY
• USB charging cable
• User Manual
• Soft Bag

Features

• Bluetooth 3.0
  • Supports two phones

General view

A Multi-function button MFB (ON/OFF - Coupling - Play / Pause - Answer / End call - Call / Rejection - Call / Recall last number)
B Volume up
C Volume down
D LED indicator
E Micro-USB charging socket
F Microphone
G Charging cable
H Position in custody
L Next Track
K Previous Track

Charging the TESPORTHEADPHBTY

Information for charging:

1 Insert the micro USB cable into headphones.
2 Insert the cable with the USB side into a computer or a USB charger (not included).
3 When the battery level is low, the red LED flashes.
4 The full charge takes about 1.5 hours.
5 The red LED turns off when charging is complete.

SAFETY IN CHARGE OF THE BATTERY LITHIUM POLYMER

• The headphones are equipped with non-removable batteries lithium polymer.
• Do not remove the batteries. Do not throw the earphone in fire, batteries may explode.
• Remove the batteries lithium polymer following the laws for disposal of batteries in force in your Country.
• Do not follow the advice of use to the use of batteries can result in fire, explosion, fire, chemical.
• Do not allow battery fluid to come into contact with eyes or skin. In case of contact, wash with plenty of water and seek medical advice.
• Do not expose the batteries to lithium polymer at temperatures above 60°
• Do not disassemble, destroy, because to do short-circuit can cause fire, injury, or other hazards.
• Charge the phone before using.
• Do not over charge the batteries: may shorten their duration.
• They are guaranteed at least about 300 cycles of charge / discharge.

How to connect a phone

1 Press and hold the MFB (multi function button) for about 8 seconds until the red and blue LED flash alternately.

2 Activating Bluetooth on the first phone look for the headphone SX-910A: you will have the associated equipment.

How to connect the second phone.

1 Press and hold the MFB until the headset turns off the LED, then turn off the phone's Bluetooth 1.
2 Relight headphones.
3 Turn on the Bluetooth on your phone 2: it will start the automatic search of headphones.
4 The same time re-activate Bluetooth in your phone 1. Click on the previous saved Bluetooth connection to connect.

HOW TO USE TESPORTHEADPHBTY

Listen to music or make a call

1 Select a song or video.
2 Briefly press the MFB button to start / pause the audio.
3 Quickly press the key search / for tracks forward / backward (I<</ >>I function).
4 Press and hold the volume buttons +/- to adjust the volume.

How to answer an incoming call

Connect the headphones to a smartphone. Press slightly (less than a second) the MFB to answer the call.

End of call

Press slightly (less than a second) the MFB to end the Call.

Rejecting a call

Press the MFB button for about 2 seconds.

How to connect a phone

Press twice MFB.

LED INDICATORS

Flashing blue

Bluetooth connection is active: Your headset is ready for use.

Low battery flashing red slowly

Low battery.

Headset disconnected.

Red led Flashing fast

When the headphones shut down correctly the red light quickly flashes on and off.

Fixed red led

On charging.

OFF

Device turned off.

TECHNICAL SPECIFICATIONS

Compatible: HSP, HFP, A2DP, AVRCP

Transmission power: class 2

V3.0 + EDR

Radius of operation: ≤ 10m

Frequency range: 2.4026GHz-2.480GHz

Charging time: ≤ 2 hours

Standby time: ≥ 100 hours

Talk time: ≥ 7 hours

Listening to music: ≥ 4 hours

TROUBLESHOOTING

Led turned off

Use the supplied USB cable and charge the battery by following the instructions previously provided.

Check whether the earphone receive power from the USB port of your computer.

If your headphones do not recharge, check if the cable is connected correctly and transmits energy.

Try to press the MFB.

No Bluetooth connection

Try to power cycle the headset by pressing the MFB.

If you do not connect within 3 minutes retry the procedures by following the instructions in this guide.

Try to use the earphones with another Bluetooth device.

Make sure that Bluetooth is active on your device.

Noisy Sound / No sound / Microphone not working

The status light flashes slowly when the headphones are connected. The Bluetooth standard function normally within 10m.

Check that the headset is selected as active on your Bluetooth device.

Adjust the volume to an audible level.

Turn off the earphones and charge it when the red light flashes and release a beep.

DIRECTIVE 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on waste electrical and

electronic equipment (WEEE)

Information for users

(a) the device requirement not to dispose of WEEE as unsorted municipal waste and to collect such WEEE separately;
(b) the device must return and collection systems available to them;
(c) the device will be collected by the vendor in case of a new one is buyed
(d) the device not correctly disposed has potential effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment;
(e) The symbol indicating separate collection for electrical and electronic equipment consists of the crossed-out wheeled bin, as shown below. The symbol must be printed visibly, legibly and indelibly.

CONECTE O TESPORTHEADPHBTY

ANSLUT TESPORTHEADPHBTY

Hur du ansluter en telefon

Şarj için bilgiler:

Teave laadimiseks:

PRIJUNKITE TESPORTHEADPHBTY

معلومات عن الشين: