KETTLE - Kettle TEFAL - Free user manual and instructions

Product type	Electric kettle
Brand	TEFAL
Model	KETTLE
Body material	Stainless steel
Base type	Base with retractable cord
Lid type	Depending on model (hinged, assisted opening, automatic, or lockable)
Functions	Automatic shut-off, temperature selector (depending on model), lighting (depending on model)
Safety	Automatic shut-off when boiling, dry boil protection, manual shut-off
Anti-scale filter	Removable (depending on model)
Cleaning	Do not immerse, clean with a damp sponge
Descaling	Recommended at least once a month with white vinegar or citric acid
Use	Heat drinking water only
Power supply	220-240 V~ (check on rating plate)
Cable length	Adjustable by winding under the base
Warranty	Manufacturer's warranty (conditions in the booklet)
Included accessories	Anti-scale filter, base
Plug type	Grounded plug
Serving temperature	Selectable on certain models (position )
Lighting	Interior or indicator light depending on model

Frequently Asked Questions - KETTLE TEFAL

How to open the lid of my TEFAL KETTLE kettle?

Depending on the model, you may have a hinged, assisted opening, automatic, or lockable lid. Refer to the Use section of the manual for the specific procedure.

Why does my kettle stop before boiling?

Check that the kettle is properly plugged in. If it has operated without water or if scale has built up, the dry boil safety system may have been triggered. Let it cool for 15 minutes, fill with water and try again.

How to clean the anti-scale filter?

Remove the removable filter. If it is wet, rinse it under water. If it is dry, gently brush it. If scale persists, descale.

How to descale my kettle?

Use white vinegar at 8% (fill the kettle with 1/2 liter, let it sit for 1 hour cold) or citric acid (boil 1/2 liter of water, add 25 g of citric acid, let it sit for 15 minutes). Then rinse several times.

What to do if the water tastes like plastic?

This often happens with a new kettle. Discard the water from the first few uses. If the problem persists, fill the kettle to the maximum, add two teaspoons of baking soda, boil, and discard the water. Rinse.

Can I immerse the kettle in water to clean it?

No, never immerse the kettle, its base, cord, or plug in water. Clean the exterior with a damp sponge after unplugging and cooling.

Why does the kettle not work at all?

Check that it is plugged into a grounded mains outlet. Make sure the lid is properly closed and the switch is in the on position. If it does not heat, the safety system may be activated (see question 2).

How to adjust the cord length?

Wind the excess cord under the base and secure it in the notch provided for this purpose (see figure 1 of the manual).

Does the kettle light up during operation?

Depending on the model, an interior light or indicator light may turn on. It automatically turns off when the water reaches boiling point or the selected temperature.

What is the warranty of the TEFAL KETTLE kettle?

The warranty covers manufacturing defects and domestic use. Return the appliance to a TEFAL authorized service center. Detailed conditions are provided in the warranty booklet.

USER MANUAL KETTLE TEFAL

Diagram of a mechanical component with a red upward arrow indicating motion or direction (no text or symbols)

fig.1

1 2

fig.2

1 auto

fig.3

Diagram showing a hand using a magnifying glass to lift a car, with red arrows indicating direction of motion or force.

fig.4

1 2

fig.5

Medical illustration showing surgical procedure with two arrows indicating direction of movement (no text or symbols present)

fig.6

Illustration of a hand holding a small object with red arrows indicating motion or rotation (no text or symbols)

fig.7

Illustration of a hand pressing down on a car wheel with red arrows indicating motion (no text or symbols)

fig.8

Illustration of a hand pouring liquid into a container with an upward arrow (no text or symbols)

fig.9

Thank you for purchasing a Tefal kettle. Read the instructions that apply to most of our models carefully and keep them to hand.

GB

Safety instructions

• This product has been designed for domestic use only. Any commercial use, inappropriate use or failure to comply with the instructions, the manufacturer accepts no responsibility and the guarantee will not apply.
• Only use your kettle for boiling drinking water.
• Only plug the appliance into an earthed mains socket, or into an electrical extension lead with an integrated earth connection. Check that the voltage indicated on the rating plate of the appliance corresponds to that of the mains voltage. You are advised not to use a multiple adapter plug.
• Do not use the kettle when you have wet hands or bare feet
• Take care not to place the kettle and its base on a hot surface, such as a hot plate, or to use it near a naked flame.
• Immediately remove the mains plug if you notice that the kettle is not operating correctly.
• Do not pull on the power cord to remove the mains plug.
• Do not let the power cord hang over the edge of a table or work surface in order to prevent the appliance from falling.
• Always remain vigilant when the appliance is on, and in particular be careful of the steam coming out of the spout, which is very hot.
• Also be careful as the body of stainless steel kettles becomes very hot during operation. Only touch the handle of the kettle.
• Never touch the filter or the lid when the water is boiling
• Never move the kettle when it is in operation.
• Our guarantee does not cover kettles that do not work properly or do not work at all because they have not been descaled.
• Protect the appliance from damp and frost.
• If your appliance has been damaged, if it is not working properly or if the power cord or the plug is damaged, we recommend that you have the appliance inspected. Any intervention to the appliance other than cleaning and descaling according to the instructions for use must be performed by an authorised Tefal service centre.
• Unplug the appliance as soon as you have finished using it for a long period of time and when you clean it.
• All appliances are subject to strict quality control procedures. These include actual usage tests on randomly selected appliances, which would explain any traces of use.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Never place the kettle or its base on a hot surface such as a hotplate or use it close to a naked flame.
• Place on a flat, stable, heat-resistant surface.
• If anything appears to be wrong with its operation, remove the main plug from the socket immediately.
• Any supply connection error will nullify the guarantee.
• Unplug the appliance and empty it if you stop using it for an extended period and when you clean it.

Before using for the first time

1 Remove all of the various packaging, stickers or accessories from both the inside and outside of the kettle.
2 Adjust the length of the cord by winding it under the base. Wedge the cord into the notch. (fig 1)

Use

1 TO OPEN THE LID, ACCORDING TO THE MODEL

• Hinged lid: press if necessary on the locking system and pull backwards. (fig 2)
• Assisted opening lid: press on the locking system and the lid lifts automatically (fig 3)
• Automatic opening lid: press the button at the top of the handle. (fig 4)
• Lockable lid: turn the lid to the left to unlock it and lift it. (fig 5)
  To close the lid, press it down firmly or turn it to the right in the case of the lockable lid.

2 PLACE THE BASE ON A FLAT, STABLE, HEAT-RESISTANT SURFACE AWAY FROM WATER SPLASHES AND ANY SOURCES OF HEAT.

- Your kettle must only be used with the base that matches it and its own anti-scale filter.

3 FILL THE KETTLE WITH THE DESIRED AMOUNT OF WATER. (FIG 6)

• You can fill it through the spout, which ensures better maintenance of the filter. As a minimum, cover the element (or the bottom of the kettle) with water.
• Never fill the kettle when it is on its base.
• Do not fill it above the maximum level, or below the minimum level. If the kettle is too full, boiling water may spill out.
• Do not use without water.
• Check that the lid is closed properly before use.
• The kettle must always be used with its own anti-scale filter.

4 POSITION THE KETTLE ON ITS BASE. PLUG IT INTO THE MAINS SOCKET.

5 FOR KETTLES THAT FEATURE A TEMPERATURE SWITCH, SELECT THE TEMPERATURE ACCORDING TO YOUR NEEDS

Position 🎨 for boiling water or position 👍 for the ideal temperature for drinking immediately. (fig 7)

6 TO START THE KETTLE

Press the on/off button positioned on the top or the bottom of the handle according to the model. (fig 8)

7 FOR KETTLES THAT FEATURE A TEMPERATURE SWITCH

if you move quickly from position ➕ to position ➕ after heating the water, the kettle has to reinitialise. If you think that this is taking a long time, you can add cold water to speed up the start of heating.

8 THE KETTLE MAY HAVE AN INTERNAL LIGHT, DEPENDING ON MODEL

9 THE KETTLE WILL SWITCH OFF AUTOMATICALLY

as soon as the water reaches boiling point or the chosen temperature. You can stop it manually, before removing it from its base to pour the water. Depending on the model, the interior light and the indicator light will go out when the water reaches boiling point. Make sure that the on/off button is in the off position after boiling and that the kettle has switched off before removing it from its base.

Throw away the water from the first two/three uses as it may contain dust. Rinse the kettle and the filter separately.

- Do not leave water in the kettle after use as this quickens the formation of scale.

Cleaning and maintenance

CLEANING YOUR KETTLE

Unplug it.

Let it cool down and clean it with a damp sponge.

• Never immerse the kettle, its base, the cord or the electric plug in water: the electrical connections or the switch must not come into contact with water.
• Do not use scouring pads.

CLEANING THE FILTER (ACCORDING TO THE MODEL) (FIG 9)

The removable filter consists of a mesh to retain the particles of scale and prevent them falling into your cup when pouring. This filter neither treats nor removes the hardness of the water. It thus conserves all the qualities of the water. With very hard water, the filter can clog very quickly (10 to 15 uses). It is important to clean it regularly. If it is wet, put it under a running tap, if dry, then brush it gently. Sometimes the scale will not detach itself; it will then need descaling.

- To remove the anti-scale filter, lift the kettle off its base and allow to cool. Never remove the filter when the appliance is full of hot water

De-scaling

De-scale regularly, preferably at least once a month or more frequently if your water is very hard.

To de-scale your kettle:

• using white vinegar:

• fill the kettle with 1/2 l of vinegar,
• leave to stand for 1 hour without heating.

• using citric acid:

• boil 1/2 l of water,
• add 25 g of citric acid and leave to stand for 15 min.

- using a de-scaler specifically for plastic kettles: follow the manufacturer's instructions.

- Empty your kettle and rinse 5 or 6 times. Repeat if necessary.

To de-scale your filter (according to model):

Soak the filter in white vinegar or diluted citric acid.

- Never use a de-scaling method other than that recommended.

IN THE EVENT OF PROBLEMS

THERE IS NO EVIDENT DAMAGE TO YOUR KETTLE

• The kettle does not work or stops before coming to the boil
• Check that your kettle is properly connected.
• The kettle has been switched on without water or an accumulation of scale has caused the overheat cut-out to operate: allow the kettle to cool and fill it with water. Descale first if scale has accumulated.

Switch it on: the kettle should start working again after about 15 minutes.

• The water tastes of plastic:

Generally, this happens when the kettle is new, discard the water from the first few boilings. If the problem persists, fill the kettle to maximum and add two teaspoons of bicarbonate of soda. Bring to the boil and discard the water. Rinse out the kettle.

IF YOUR KETTLE HAS BEEN DROPPED, IF IT LEAKS OR IF THERE IS VISIBLE DAMAGE TO THE POWER CORD, THE PLUG OR THE BASE OF THE KETTLE

Return your kettle to your TEFAL After-Sales Service Centre, only they are authorised to carry out repairs. See the guarantee conditions and list of centres in the booklet supplied with your kettle. The type and serial number are shown on the bottom of your kettle. This guarantee covers manufacturing defects and domestic use only. Any breakage or damage resulting from failure to comply with the instructions for use is not covered by the guarantee.

• TEFAL reserves the right to modify the characteristics or components of its kettles at any time in the interests of the consumer.
• Do not use the kettle. No attempt must be made to dismantle the kettle or its safety devices.
• If the supply cord is damaged, it must be replaced by the manufacturer, its after-sales service centre or a similarly qualified person, in order to avoid any danger.

Prevention of domestic accidents

For a child, a burn or scald, even if slight, can sometimes be serious.

As they grow up, teach your children to beware of hot liquids to be found in the kitchen. Position the kettle and its supply cord well to the rear of the work surface, out of the reach of children.

If an accident does occur, run cold water over the scald immediately and call a doctor if necessary.

- In order to avoid any accident: do not carry your child or baby at the same time as drinking or carrying a hot drink.

Environmental protection

Your appliance contains many recoverable or recyclable materials.

Take it to a local, civic waste collection point.

HELPLINE:

If you have any product problems or queries, consult our website – tefal.co.uk