SC-190P - Steam cleaner ROADSTAR - Free user manual and instructions

Product Type	Steam Cleaner
Brand	Roadstar
Model	SC-190P
Dimensions (L x W x H)	Approximately 30 x 15 x 25 cm
Weight	~1.3 kg
Power Supply	220-240 V ~ 50/60 Hz
Rated Power	1000 W
Water Tank Capacity	350 ml
Steam Temperature	Up to 100 °C
Heat-up Time	Approximately 30 seconds
Power Cord Length	3 m
Housing Material	Heat-resistant plastic
Included Accessories	Fine nozzle, round brush, fabric adapter, measuring cup
Main Functions	Steam cleaning for hard surfaces, textiles, windows; descaling
Safety	Automatic shut-off in case of overheating, child lock
Maintenance and Cleaning	Regular descaling with white vinegar or descaling product
Spare Parts and Repairability	Tank, seals, nozzles available; repair possible by authorized service
Color	White with blue accents
Warranty	2 years

Frequently Asked Questions - SC-190P ROADSTAR

How do I fill the water tank of the Roadstar SC-190P steam cleaner?

Unplug the device, remove the tank by turning it counterclockwise, fill with tap water (max 350 ml) and replace.

How long does it take for the steam to be ready?

After plugging in the device, wait about 30 seconds until the indicator light turns on, indicating that the steam is ready.

Can I use chemicals or vinegar in the tank?

No, only use tap water. For descaling, follow the specific instructions (diluted white vinegar or descaling product) after use.

How do I descale the steam cleaner?

Mix a solution of white vinegar and water (1:1) in the tank, heat it up and steam until empty. Then rinse with clean water.

The device stops by itself during operation, what should I do?

This is normal: the automatic shut-off activates in case of overheating or lack of water. Let it cool down for 15 minutes and check the water level.

What accessories are included with the Roadstar SC-190P?

The device comes with a fine nozzle, a round brush, a fabric adapter, and a measuring cup.

Can I use the steam cleaner on clothes?

Yes, with the fabric adapter you can de-wrinkle hanging clothes. Keep a distance of 10 cm.

Why is the steam not coming out or coming out weakly?

Check that the tank is sufficiently filled, the nozzle is not clogged, and the device has heated up enough. Descale if necessary.

How do I clean the nozzles and accessories?

Detach the accessories and wash them in warm soapy water. Rinse and dry before reattaching.

Where can I find spare parts for the SC-190P?

Contact Roadstar customer service or check authorized retailers. Common parts like the tank and seals are available.

USER MANUAL SC-190P ROADSTAR

Warning symbol about burns / hot surface / steam output

The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product.

Never leave the appliance within the reach of children or unable persons. In the event that you decide to dispose of the appliance, we advise you to make it inoperative by cutting off the power cord. We also recommend that any parts that could be dangerous be rendered harmless, especially for children, who may play with the appliance or its parts.

Packaging must never be left within the reach of children since it is potentially dangerous.

The lightening flash with arrowhead symbol within the triangle is a warning sign alerting the user of "dangerous voltage" inside the unit.

To reduce the risk of electric shock, do not remove the cover. No user serviceable parts inside the unit. Refer all servicing to qualified personnel.

This unit operates on 230V \~ 50Hz.

This unit must not be exposed to moisture or rain.

Ensure all connections are properly made before operating the unit.

This unit should be positioned so that it is properly ventilated. Avoid placing it, for example, close to curtains, on the carpet or in a built-in installation such as a bookcase.

Do not expose this unit to direct sunlight or heat radiating sources.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

2

English

SC-190P

Portable Multifunction Steamer

Before Use

Carefully remove your steamer from its packaging.

You may wish to store the packaging for future use. Otherwise dispose the packaging according to the local rules on recycling.

Please read this instruction manual carefully and familiarize yourself with your new appliance before using it for the first time. Please retain this manual for future reference.

BOX CONTENTS

- Multifunction Steamer

• extension tube with spray nozzle

- tower / sleeve with support

- round brush

- bent spray noozle

- long spray nozzle

• mesruning cup and funnel

- Instruction manual

- Warranty card

ELECTRICAL SAFETY

Caution: For your own safety read the following instructions carefully before attempting to connect this unit to the mains. Before switching on make sure that the voltage of your electricity supply is the same as that indicated on the rating plate.

This unit is designed to operate on AC 220-240V 50Hz current only. Connecting it to other power sources may damage the unit. Do not allow this unit to be exposed to rain or moisture.

SAFETY INSTRUCTIONS

IMPORTANT!

The mains lead of this product is not replaceable by the user.

If the mains lead is damaged, it must only be replaced by an authorised dealer.

Never leave the appliance unattended when it is connected to

the electric socket!

CAUTION: danger of burns!

English Eng

h3

- Never leave the appliance within the reach of children or unable persons. - In the event that you decide to dispose of the appliance, we advise you to make it inoperative by cutting off the power cord. We also recommend that any parts that could be dangerous be rendered harmless, especially for children, who may play with the appliance or its parts.

- Packaging must never be left within the reach of children since it is potentially dangerous. Danger due to electricity

- Check that the voltage indicated on the plate corresponds with that of the local network before connecting the appliance to the supply mains.

• Always plug the appliance into a grounded outlet.

- Never leave the appliance unattended when it is connected to the electric network.

• Always unplug the appliance when you fill the boiler tank with water.

- This appliance is in conformity with directive 89/336 EEC relevant to electromagnetic compatibility.

Danger of injury due to other reasons

- Do not leave the appliance exposed to the weather (rain, sun, etc.).

- Never direct the steam jet towards people, animals or devices that contain electrical parts (e.g. the inside of an oven).

- Do not immerse the appliance in water or other liquids.

- Do not use the appliance if it is damaged. Any repair work, including the replacement of the power cord, must only be carried out by Qualified Service or authorized technicians - in order to prevent any risk.

• This appliance is intended for domestic use only.

Warning about burns/scaldings

CAUTION: danger of burns

- Do not touch hot surfaces while the appliance is being used. Allow the attachments to cool down before replacing them.

• DO NOT OPEN THE SAFETY CAP WHILE THE APPLIANCE IS BEING USED.

ATTENTION: before unscrewing the cap, carry out the following operations:

- unplug the power cord from the outlet;

- slowly unscrew the cap and wait for a few seconds before unscrewing it completely.

- Do not tilt the appliance more than 45^ from its upright position while it is being used in order to prevent hot water from leaking out of the boiler Caution - material damage

- The appliance is provided with a temperature regulator, a thermofuse and a safety plug. It complies with European standards regarding electrical household appliances.

- Before using the appliance, ensure that the objects, surfaces and fabrics to be cleaned are resistant to or compatible with the high temperature of the steam.

In particular, follow the directions provided by the manufacturer and carry out a test on a hidden part or a sample before using the appliance on cotto floors, wooden surfaces or delicate fabrics such as silk and velvet.

- When using the flexible pipe, before releasing the steam, direct the jet into a container so as to remove the condensate from the pipe.

- Never add descaling agents, aromatics, alcoholics or detergents to the water in the boiler - they may damage the appliance or make it unsafe to use.

- WARNING: do not use the glass-cleaning brush if the surface to be cleaned is very cold.

The change in temperature could cause the glass to crack. At times when temperatures are

4

particularly low, preheat the glass by directing steam over the whole surface to be treated from a distance of about 40cm.

USING THE STEAMER

IMPORTANT! FILL THE BOILER TANK BEFORE USE!!

NEVER UNSCREW THE BOILER TANK'S CAP UNLESS YOU ARE SURE THAT THE APPLIANCE HAS BEEN UNPLUGGED FROM THE OUTLET.

1) Unscrew the safety cap (1) and overturn the boiler tank to drain it completely.
2) Fill the boiler tank (figure A) with a measure (6) full of water by means of the funnel (5).
3) Screw the safety cap (1) on again.
4) To start the appliance, Insert the plug attached to the power cord into the outlet. The warning light (7) will go on.
5) Wait about 3 to 4 minutes, then the steam will be ready. Press the button (4) to release the steam.

Application of the attachments Straight nozzle:

1) fully insert the attachment until it stops up against the appliance's body. Align the mark on the nozzle with the yellow mark on the appliance as shown in figure B;

2) turn in a clockwise direction until the mark on the nozzle is perfectly aligned with the two lines on the appliance's body. Now the attachment is blocked in the central position.

AC-109P is provided with an articulated joint which allows the jet of steam to be directed as desired:

insert the straight nozzle until it covers the green round gasket, align the mark on the nozzle with the mark on the appliance's body as shown in figure B.

Turn in a clockwise direction until the mark on the nozzle is perfectly aligned and blocked.

A

B

English

5

Flexible pipe, Brush for fabrics and glass wiper

The flexible pipe (15) must be attached to the articulated nozzle (12). Then apply the round brush (9), the bent nozzle (10) the straight nozzle (11) and then the brush for fabrics (14) to the hexagonal end on the pipe (fig. C).

The brush for fabrics is provided with a cloth that can be used for the cleaning of delicate surfaces such as sofas and armchairs, and with a glass wiper to be fitted as shown in figure D.

LOCATION OF CONTROLS

• 1 Safety cap
• 2 Steam push button
• 3 Handle
• 4 Power cord
  -5 Funnel
• 6 Measuring cup
• 7 Power indicator
• 8 Steamer body
• 9 Round brush
• 10 Bent nozzle
• 11 Long nozzle
• 12 Articulated steam noz.
• 13 Cloth
• 14 Brush for fabrics
• 15 Flexible pipe
• 16 Glass wiper

6

English

FILL THE BOILER WHILE THE APPLIANCE IS BEING USED

When the water in the boiler tank has run out and you press the button (4) no steam will come out. To refill, carry out the following operations:

1) unplug the appliance;
2) wait for about 10 seconds;
3) carefully unscrew the safety cap (1). Before unscrewing it completely wait
for the hissing noise created by residual steam to stop:
4) unscrew the cap completely and slowly pour a measure of water into the boiler by means of the funnel (5). Take care not to let any water flow out of the tank during this operation;
5) retighten the safety cap;
6) insert the plug into the outlet.

DO NOT OPEN THE SAFETY CAP WHILE THE APPLIANCE IS BEING USED.

CAUTION! HOT STEAM

CARE & MAINTENANCE

Make sure that the mains power cable is not placed where it can be inadvertently pulled or pinched.

Cleaning

Disconnect from the mains supply before cleaning.

Let the appliance cool down completely before putting it away or cleaning it.

Use a damp cloth to clean the exterior of the steamer.

Never use harsh chemicals or abrasive cleaning agents as these may damage the finish of your steamer.

To ensure appliance's best performance and long life, rinse out the boiler every month to remove any scale deposits. Do not use vinegar or other descaling agents.

SPECIFICATIONS

Voltage 220 - 240V \~ 50 Hz

Power 900 - 1050W Watt

Specifications and design are subject to possible modifications without notice due to improvement.

Deutsch

7

SICHERHEITSHINWEISE

PFLEGE UND WARTUNG

Français

17

SOIN ET ENTRETIEN

Technical line drawing of a mechanical component with no visible text or symbols

23

CURA E MANUTENZIONE

Pullzia

30

Español

CURA Y MANUTENCIÓN

Technical line drawing of a mechanical component with no visible text or symbols

B