RC-736RD/FM - Car Radio ROADSTAR - Free user manual and instructions
Find the device manual for free RC-736RD/FM ROADSTAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Radio |
| Brand | Roadstar |
| Model | RC-736RD/FM |
| DIN Size | Standard 1-DIN chassis (178 x 50 x 160 mm) |
| Supported Bands | FM (87.5–108 MHz) and AM (530–1600 kHz) |
| Cassette Player | Accepts standard audio cassettes |
| Max Power Output | 4 x 20 W (approximate peak) |
| Power Supply | 12 V DC, negative ground |
| Fuse Rating | 10 A blade fuse (typical) |
| Antenna Connector | Motorola type |
| Audio Outputs | 4 speaker outputs, front and rear pairs |
| Controls | Manual tuning, volume, balance, fader, tone |
| Display | LCD backlit display |
| Clock | Built-in clock with preset memory |
| Mounting | Front panel removable (with mounting sleeve) |
| Weight | Approximately 0.8 kg |
| Material | Plastic and metal construction |
| Cleaning | Wipe with a dry soft cloth; avoid chemical cleaners |
| Safety Features | Reverse polarity protection, fuse protection |
| Spare Parts | Available through authorized Roadstar service centers |
| Repairability | Repairable design; control knobs and fuses replaceable |
| General Information | Designed for 12V vehicles; manual in English and other languages |
Frequently Asked Questions - RC-736RD/FM ROADSTAR
What is the correct way to connect the power supply?
Connect the red wire to the ignition switch's 12V positive and the black wire to the vehicle chassis ground. Ensure the voltage matches the radio's 12V DC requirement to avoid damage.
How do I install the radio into my car's dashboard?
Use the supplied mounting sleeve and trim ring. Slide the sleeve into the dashboard opening, bend the tabs outward for a secure fit, then insert the radio until it clicks into place. Connect all wiring before final insertion.
What fuse should I use if the original blows?
Replace the blown fuse with a 10 A blade fuse of the same type. Never use a higher rating as it can cause electrical damage or fire.
Why is my FM reception weak?
Check the antenna connector and ensure the antenna is fully extended. Adjust the antenna position for best signal. If the problem persists, test with another antenna to verify the radio's tuner.
How do I clean the cassette player head?
Use a cotton swab moistened with alcohol or a commercial cassette head cleaner. Gently rub the head and pinch roller, then allow it to dry completely before playback.
What should I do if the radio has no power?
First check the vehicle fuse and the radio's inline fuse. Ensure the red wire has 12V when the ignition is on and the black wire is properly grounded. Verify all connections are secure.
How can I adjust the sound to my preference?
Use the volume control for overall level, and the bass and treble knobs to shape the tone. Balance adjusts left/right speakers, while fader adjusts front/rear.
Does this car radio support RDS?
The RC-736RD/FM is not specified as an RDS-equipped model. It provides basic FM/AM tuning without radio text or station name display.
Can I connect this radio to an external amplifier?
This model is designed for speaker-level outputs only. If you need an amplifier, use a high-level to low-level converter to connect the speaker wires to the amplifier's inputs.
How do I prevent losing my preset stations?
The radio keeps presets in non-volatile memory as long as the yellow constant power wire is connected to battery power. Check that this wire has voltage even when the ignition is off.
User questions about RC-736RD/FM ROADSTAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Car Radio in PDF format for free! Find your manual RC-736RD/FM - ROADSTAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RC-736RD/FM by ROADSTAR.