NC 100 - Thermometer MICROLIFE - Free user manual and instructions

USER MANUAL NC 100 MICROLIFE

Guarantee Card NC 100

H. 空洞

[Figure 2]

SHEMEN

1.100

C€0044

（2）买入N型。

(1) 2017年1月1日

Portrait of a young child with short hair against a solid blue background (no text or symbols visible)

Microlife NC 100

LM → 3 M → X M → 14 M → 24 M → 37 M → 48 M → 69 M → 74 M → 77 M → 80 M → 83 M → 86 M → 89 M → 93 M → 96 M → 99

microlife

Microlide NC 100

microlife

Microlife NC 100

	A	B	C
	100%	-2	-3
	80%	58.9%	-4
	70%	53.2%	-5
	60%	53.2%	-6
	50%	53.2%	-7

Mizakh: Non-Contract Thermometer NE 101

1. 2005 year

2. Year of day

3. Year of year

4. Year of year

5. Year of year

6. Year of year

7. Year of year

8. Year of year

9. Year of year

10. Year of year

11. Year of year

12. Year of year

13. Year of year

14. Year of year

15. Year of year

16. Year of year

17. Year of year

18. Year of year

19. Year of year

20. Year of year

21. Year of year

22. Year of year

23. Year of year

24. Year of year

25. Year of year

26. Year of year

27. Year of year

28. Year of year

29. Year of year

30. Year of year

31. Year of year

32. Year of year

33. Year of year

34. Year of year

35. Year of year

36. Year of year

37. Year of year

38. Year of year

39. Year of year

40. Year of year

41. Year of year

42. Year of year

43. Year of year

44. Year of year

45. Year of year

46. Year of year

47. Year of year

48. Year of year

49. Year of year

50. Year of year

51. Year of year

52. Year of year

53. Year of year

54. Year of year

55. Year of year

56. Year of year

57. Year of year

58. Year of year

59. Year of year

60. Year of year

61. Year of year

62. Year of year

63. Year of year

64. Year of year

65. Year of year

66. Year of year

67. Year of year

68. Year of year

69. Year of year

70. Year of year

71. Year of year

72. Year of year

73. Year of year

74. Year of year

75. Year of year

76. Year of year

77. Year of year

78. Year of year

79. Year of year

80. Year of year

81. Year of year

82. Year of year

83. Year of year

84. Year of year

85. Year of year

86. Year of year

87. Year of year

88. Year of year

89. Year of year

90. Year of year

91. Year of year

92. Year of year

93. Year of year

94. Year of year

95. Year of year

96. Year of year

97. Year of year

98. Year of year

99. Year of year

100. Year of year

Guarantee Card NC 100

[1] _0() = 12_0(x) (2004) [1, 25, 7].

The following table provides the information in a tabular format:

1. The Advantages of this Thermometer
2. Important Safety Instructions
3. How this Thermometer measures Temperature
4. Control Displays and Symbols
5. Changing between Body and Object Mode
6. Directions for Use
7. Changing between Celsius and Fahrenheit
8. How to recall 30 readings in Memory Mode
9. Error Messages
   10.Cleaning and Disinfecting
   11.Battery Replacement
   12.Guarantee
   13.Technical Specifications
   14.www.microlife.com
   Guarantee Card (see Back Cover)

1. The Advantages of this Thermometer

Measures in a matter of seconds

The innovative infrared technology allows the measurement without even touching the object. This guarantees safe and sanitary measurements within seconds.

Multiple uses (wide range of measurement)

This thermometer offers a wide range of measurement from 0-100.0 °C / 32-212.0 °F, meaning the unit can be used to measure body temperature or it also has a feature allowing it to be used to measure surface temperature of the following examples:

• Milk surface temperature in a baby's bottle
  • Surface temperature of a baby's bath
• Ambient temperature

Accurate and reliable

The unique probe assembly construction incorporates an advanced infrared sensor, ensuring that each measurement is accurate and reliable.

Gentle and easy to use

• The ergonomic design enables simple and easy use of the thermometer.
• This thermometer can even be used on a sleeping child without causing any interruption.
  • This thermometer is quick, therefore child-friendly.

Auto-Display Memory

The last reading is automatically displayed for 2 seconds when the unit is switched ON.

Multiple readings recall

Users will be able to recall the last 30 readings when entering the recall mode, enabling efficient tracking of temperature variations.

Safe and hygienic

• No direct skin contact.
• No risk of broken glass or mercury ingestion.
• Completely safe for use on children.
- Cleaning of the probe can be done with an alcohol-moistened cotton tissue, making this thermometer completely hygienic for use by the whole family.

Fever alarm

10 short beeps and a red LCD backlight alert the patient that he/she may have a temperature equal to or higher than 37.5 °C.

2. Important Safety Instructions

• Follow instructions for use. This document provides important product operation and safety information regarding this device. Please read this document thoroughly before using the device and keep for future reference.
• This device may only be used for the purposes described in these instructions. The manufacturer cannot be held liable for damage caused by incorrect application.
• Never immerse this device in water or other liquids. For cleaning please follow the instructions in the «Cleaning and Disinfecting» section.
• Do not use this device if you think it is damaged or notice anything unusual.

• Never open this device.

• A basic physiological effect called vasoconstriction can occur in the early stages of fever, resulting in a cool skin effect. The recorded temperature using this thermometer can, therefore, be unusually low.

• If the measurement result is not consistent with the patient's finding or unusually low, repeat the measurement every 15 minutes or double check the result by another core body temperature measurement.
• This device comprises sensitive components and must be treated with caution. Observe the storage and operating conditions described in the «Technical Specifications» section.
• Ensure that children do not use this device unsupervised; some parts are small enough to be swallowed.
• Do not use this device close to strong electromagnetic fields such as mobile telephones or radio installations. Keep a minimum distance of 3.3 m from such devices when using this device.
• Protect it from:
• extreme temperatures
• impact and dropping
• contamination and dust
• direct sunlight

• heat and cold

• If the device is not going to be used for a prolonged period the batteries should be removed.
  WARNING: The measurement results given by this device is not a diagnosis. It is not replacing the need for the consultation of a physician, especially if not matching the patient's symptoms. Do not rely on the measurement result only, always consider other potentially occurring symptoms and the patient's feedback. Calling a doctor or an ambulance is advised if needed.
  This thermometer measures infrared energy radiated from the forehead as well as objects. This energy is collected through the lens and converted to a temperature value.

• All segments displayed ⑧: Press the ON/OFF button ⑤ to turn on the unit; all segments will be shown for 2 seconds.
• Memory ⑨: The last reading will automatically be shown on the display for 2 seconds.
• Ready for measuring 10: When the unit is ready for measuring, the «°C» or «°F» icon will keep flashing while the mode icon (body or object) will be displayed.

3. How this Thermometer measures Temperature

4. Control Displays and Symbols

• Measurement complete ⑪: The reading will be shown on the display ④ with the «°C» or «°F» icon and the mode icon steady. The unit is ready for the next measurement as soon as the «°C» or «°F» icon is flashing again.
• Low battery indicator ⑭: When the unit is turned on, the «▼» icon will keep flashing to remind the user to replace the batteries.

5. Changing between Body and Object Mode

For changing from body to object mode, slide the mode switch ⑥ at the side of the thermometer downwards. For switching back to body mode, slide the switch up again.

6. Directions for Use

Measuring in body mode

1. Press the ON/OFF button ⑤. The display ④ is activated to show all segments for 2 seconds.
2. The last measurement reading will automatically be shown on the display for 2 seconds with the « M» icon ⑨.
3. When the «°C» or «°F» icon is flashing, a beep sound is heard and the thermometer is ready for measuring ⑩.

4. Aim the thermometer at the center of the forehead with a distance of no more than 5 cm. Please remove any hair, sweat or dirt from the forehead before measuring to improve the accuracy of the readings.

5. Press the START button ③ and ensure that the activated blue tracking light is aimed at the center of the forehead. After 3 seconds a long beep will verify the completion of measurement.

6. Read the recorded temperature from the LCD display. Measuring in object mode

7. Follow steps 1-3 above, then aim the thermometer at the center of the object you want to measure with a distance of no more than 5 cm. Press the START button ③. After 3 seconds a long beep will verify the completion of measurement.

8. Read the recorded temperature from the LCD display. NOTE:

• Patients and thermometer should stay in similar room condition for at least 30 minutes.
- Don't take a measurement while or immediately after nursing a baby.
- Don't use the thermometer in high humidity environments.
- Patients should not drink, eat or exercise before/while taking the measurement.
- Don't move the measurement device from the measuring area before hearing the termination beep.
- Use an alcohol swab to carefully clean the probe and wait for 15 minutes before taking a measurement on another patient.

• 10 short beeps and a red LCD backlight alert the patient that he/she may have a temperature equal to or higher than 37.5 °C.
• Always take the temperature in the same location, since temperature readings may vary according to locations.
• Doctors recommend rectal measurement for newborn infants within the first 6 months, as all other measuring methods might lead to ambiguous results. If using a non contact thermometer on those infants, we always recommend verifying the readings with a rectal measurement.

• In the following situations it is recommended that three temperatures are taken with the highest one taken as the reading:

• Children under three years of age with a compromised immune system and for whom the presence or absence of fever is critical.

• When the user is learning how to use the thermometer for the first time until he/she has familiarized himself/herself with the device and obtains consistent readings.
• If the measurement is surprisingly low.

• Readings from different measuring sites should not be compared as the normal body temperature varies by measuring site and time of day, being highest in the evening and lowest about one hour before waking up. Normal body temperature ranges:

• Axillar: 34.7 - 37.3 °C / 94.5 - 99.1 °F

• Oral: 35.5 - 37.5 °C / 95.9 - 99.5 °F
• Rectal: 36.6 - 38.0 °C / 97.9 - 100.4 °F
• Microlife NC 100: 35.4 - 37.4 °C / 95.7 - 99.3 °F

7. Changing between Celsius and Fahrenheit

This thermometer can display temperature readings in either Fahrenheit or Celsius. To switch the display between °C and °F, simply turn OFF the unit, press and hold the START button ③ for 5 seconds; after 5 seconds, the current measurement scale («°C» or «°F» icon) will flash on the display ⑮. Change the measurement scale between °C and °F by pressing the START button ③. When the measurement scale has been chosen, wait for 5 seconds and the unit will automatically enter the «ready for measuring» mode.

8. How to recall 30 readings in Memory Mode

This thermometer can recall the last 30 readings.

• Recall mode ⑯: Press the START button ③ to enter Recall mode when power is off. The memory icon «M» will flash.
• Reading 1 - the last reading ⑰: Press and release the START button ③ to recall the last reading. Display 1 alone with memory icon.

- Reading 30 - readings in succession: Press and release the START button ③ consecutively to recall the last 30 readings in succession. Pressing and releasing the START button ③ after the last 30 readings have been recalled will resume the above sequence from reading 1.

9. Error Messages

• Measured temperature too high ⑱: Displays «H» when measured temperature is higher than 42.2 °C / 108 °F in body mode or 100 °C / 212 °F in object mode.
• Measured temperature too low ⑲: Displays «L» when measured temperature is lower than 34.0 °C / 93.2 °F in body mode or 0 °C / 32 °F in object mode.
• Ambient temperature too high ⑳: Displays «H» and when ambient temperature is higher than 40.0 °C / 104.0 °F.
• Ambient temperature too low ②: Displays «L» and when ambient temperature is lower than 16.0 °C / 60.8 °F in body mode or lower than 5.0 °C / 41.0 °F in object mode.
• Error function display 22: The system has a malfunction.
• Blank display 23: Check if the batteries have been inserted correctly. Also check polarity (<++) and <--> of the batteries.

- Flat battery indicator 24: If only «▼» icon is shown on the display, the batteries should be replaced immediately.

10. Cleaning and Disinfecting

Use an alcohol swab or cotton tissue moistened with alcohol (70% Isopropyl) to clean the thermometer casing and the measuring sensor. Ensure that no liquid enters the interior of the device. Never use abrasive cleaning agents, thinners or benzene for cleaning and never immerse the device in water or other cleaning liquids. Take care not to scratch the surface of the sensor lens and the display.

11.Battery Replacement

This device is supplied with 2 new, long-life 1.5V, size AAA batteries. Batteries need replacing when this icon «▼» ②4 is the only symbol shown on the display. Remove the battery cover ②5 by sliding it in the direction shown.

Replace the batteries – ensure correct polarity as shown by the symbols in the compartment.

Batteries and electronic devices must be disposed of in accordance with the locally applicable regulations, not with domestic waste.

12.Guarantee

This device is covered by a 2 year guarantee from the date of purchase. During this guarantee period, at our discretion, Microlife will repair or replace the defective product free of charge.

Opening or altering the device invalidates the guarantee.

The following items are excluded from the guarantee:

• Transport costs and risks of transport.
• Damage caused by incorrect application or non-compliance with the instructions for use.
  • Damage caused by leaking batteries.
  • Damage caused by accident or misuse.
• Packaging/storage material and instructions for use.
  • Regular checks and maintenance (calibration).
  • Accessories and wearing parts: Battery.

Should guarantee service be required, please contact the dealer from where the product was purchased, or your local Microlife service. You may contact your local Microlife service through our website: www.microlife.com/support

Compensation is limited to the value of the product. The guarantee will be granted if the complete product is returned with the original invoice. Repair or replacement within guarantee does not prolong or renew the guarantee

period. The legal claims and rights of consumers are not limited by this guarantee.

13. Technical Specifications

Type: Non Contact Thermometer NC 100

Measurement Body mode: 34.0-42.2 °C / 93.2-108.0 °F

range: Object mode: 0-100.0 °C / 32-212.0 °F

Resolution: 0.1 °C / °F

Measurement Laboratory:

accuracy: ±0.2 °C, 36.0 \~ 39.0 °C

±0.4 °F, 96.8 \~ 102.2 °F

Display: Liquid Crystal Display, 4 digits plus special icons

Acoustic: The unit is turned ON and ready for the measurement: 1 short beep.

Complete the measurement: 1 long beep (1 sec.) if the reading is less than 37.5 °C / 99.5 °F, 10 short «beep» sounds, if the reading is equal to or greater than 37.5 °C / 99.5 °F.

System error or malfunction: 3 short «bi» sounds.

Memory: Auto-Display the last measured temperature 30 readings recall in the memory mode

Backlight: The display light will be GREEN for 3 seconds, when the unit is turned ON. The display light will be GREEN for 5 seconds, when a measurement is completed with a reading less than 37.5 °C / 99.5 °F. The display light will be RED for 5 seconds, when a measurement is completed with a reading equal to or higher than 37.5 °C / 99.5 °F.

Operating Body mode: 15-40.0 °C / 59-104.0 °F

conditions: Object mode: 5-40.0 °C / 41-104.0 °F

Storage -25-+55°C / -13-+131°F

conditions: 15 - 95 % relative maximum humidity

Automatic Approx. 1 minute after last measurement

Switch-off: has been taken

Battery: 2 x 1.5 V alkaline batteries; size AAA

Battery approx. 2000 measurements

lifetime: (using new batteries)

Dimensions: 150 x 40 x 39 mm

Weight: 81 g (with batteries), 56 g (w/o batteries)

IP Class: IP21

Reference to ASTM E1965;

standards: IEC 60601-1; IEC 60601-1-2 (EMC); IEC 60601-1-11

Expected

service life: 5 years or 12000 measurements

This device complies with the requirements of the Medical Device Directive 93/42/EEC.

Technical alterations reserved.

According to the Medical Product User Act a biennial technical inspection is recommended for professional users.

Please observe the applicable disposal regulations.

14.www.microlife.com

Detailed user information about our thermometers and blood pressure monitors as well as services can be found at www.microlife.com.

www.microlife.com/support

www.microlife.com/support

www.microlife.com/support

www.microlife.com/support

The following items are excluded from the guarantee:

Conditii de functionare:

Modul Corp uman: 15-40,0 °C / 59-104,0 °F Modul Obiect: 5-40,0 °C / 41-104,0 °F

Standarde ASTM E1965; IEC 60601-1;

de referință: IEC 60601-1-2 (EMC); IEC 60601-1-11

Durata de

viată

IEC 60601-1; IEC 60601-1-2 (EMC): : المعايير

IEC 60601-1-11

IEC 60601-1; IEC 60601-1-2 (EMC);

IEC 60601-1-11

www.microlife.com.14