Comforto 28Z016 - Iron Zelmer - Free user manual and instructions

Product Type	Steam Iron
Brand	Zelmer
Model	Comforto 28Z016
Power Consumption	2400 W
Voltage	220-240 V ~ 50/60 Hz
Soleplate Material	Stainless Steel
Continuous Steam Output	Up to 35 g/min
Steam Boost	Up to 120 g/min
Water Tank Capacity	300 ml
Anti-Drip System	Yes
Anti-Calc / Self-Clean	Yes
Auto Shut-Off	Yes (8 min vertical, 30 sec horizontal)
Spray Function	Yes
Vertical Steam	Yes
Temperature Settings	Adjustable thermostat with fabric guide
Indicator Light	Power and temperature ready
Cord Length	2.5 m
Weight	1.2 kg
Dimensions (L x W x H)	30 x 12 x 15 cm
Color	White/Blue

Frequently Asked Questions - Comforto 28Z016 Zelmer

How do I fill the water tank?

Open the water inlet cover, tilt the iron, and pour water up to the MAX mark. Use the included measuring cup for accuracy.

What type of water should I use?

Use distilled or demineralized water to prevent scale buildup. Tap water can be used if it is soft. Do not use water with additives like perfume.

How do I set the temperature?

Turn the temperature dial to the desired fabric setting (e.g., silk, wool, cotton). Wait for the indicator light to turn off, indicating the soleplate has reached the set temperature.

How do I use the steam burst function?

Press the steam burst button firmly while ironing. For best results, ensure the iron is at a high temperature (cotton/linen setting) and water tank is at least half full.

How do I clean the soleplate?

Unplug and let cool. Wipe the soleplate with a damp cloth and mild detergent. Avoid abrasive cleaners. For stubborn residue, use a soleplate cleaning pen.

How do I descale the iron?

Fill the tank with a mixture of 1 part white vinegar and 2 parts water. Set temperature to high, steam for a few minutes, then empty and rinse with clean water. Repeat as needed.

How does the auto shut-off work?

The iron automatically switches off if left horizontal for 30 seconds or vertical for 8 minutes. To resume, simply lift or shake the iron.

What does the indicator light mean?

The power light stays on while the iron is plugged in. The temperature light turns off when the soleplate reaches the set temperature and cycles on/off to maintain it.

Can I use the iron without water?

Yes, the iron can be used for dry ironing. Set the steam control to the dry position. Do not press the steam buttons when empty.

How should I store the iron?

Empty the water tank, let the iron cool completely, then wrap the cord loosely around the heel rest. Store upright in a dry place.

USER MANUAL Comforto 28Z016 Zelmer

Line drawing of an iron (£) with a flag attached, showing mechanical components and a handle (no text or symbols)

Line drawing of an iron on a machine, emitting exhaust smoke (no text or symbols)

Line drawing of an iron (£) with steamers and flames (no text or symbols)

Line drawing of an iron (£) with six steamers, no text or symbols present

Line drawing of an iron (£) with steam rising, no text or symbols present

Line drawing of a steam iron on a stand (no text or symbols)

Nalévání vody

Line drawing of an iron (£) with a flag attached, showing mechanical components and a handle (no text or symbols)

Line drawing of an iron (£) with steam spraying (no text or symbols)

Line drawing of a steam iron with decorative base (no text or symbols)

Line drawing of an iron (£) with six steamers, no text or symbols present

Line drawing of an iron (£) with steam rising (no text or symbols)

Line drawing of a steam iron on a stand (no text or symbols)

Čištění i údržba

Nalievanie vody

Line drawing of an iron iron with a flag attached, showing internal components and a handle (no text or symbols)

Line drawing of an iron (£) with steam spraying (no text or symbols)

Line drawing of a steam iron with decorative base (no text or symbols)

Line drawing of a steam iron with six blades (no text or symbols)

POZNÁMKA:

Line drawing of an iron (£) with steam rising (no text or symbols)

Line drawing of a steam iron on a stand (no text or symbols)

A víz betöltése

Line drawing of an iron (£) with a flag attached, showing mechanical components (no text or symbols)

Line drawing of an iron (£) with steam rising (no text or symbols)

Line drawing of a steam iron with three blades (no text or symbols)

Line drawing of a steam iron with five blades (no text or symbols)

Line drawing of an iron (£) with steam rising (no text or symbols)

Line drawing of a mechanical device with a handle and base mount (no text or symbols)

Turnarea apei

Line drawing of a mechanical device with a flag and handle (no text or symbols)

Line drawing of a steam iron with motion lines indicating steam (no text or symbols)

Line drawing of a steam iron with cooling fins (no text or symbols)

Line drawing of a steam iron with five blades (no text or symbols)

ATENTIE:

Line drawing of an iron (£) with steam rising (no text or symbols)

Line drawing of a mechanical iron or iron stand with a base (no text or symbols)

Line drawing of a steam iron with a flag attached, showing internal components and a handle (no text or symbols)

Line drawing of an iron (£) with steam emission (no text or symbols)

Line drawing of a steam iron with three platters (no text or symbols)

Line drawing of an iron (£) with three rows of six feet, no text or symbols present

ВНИМАНИЕ:

Line drawing of an iron frying pan with steam rising (no text or symbols)

Line drawing of a steam iron on a stand (no text or symbols)

Наливане на вода

Line drawing of an iron (£) with a flag attached, showing mechanical parts and a handle (no text or symbols)

Line drawing of an iron (£) with steam spraying from it (no text or symbols)

Разбрызгивание

Line drawing of a steam iron with four decorative base (no text or symbols)

Line drawing of an iron (£) with six steamers, no text or symbols present

Line drawing of an iron (£) with steam rising (no text or symbols)

Line drawing of a mechanical device with a handle and base mount (no text or symbols)

Line drawing of an iron (£) with a flag attached, showing mechanical components and a handle (no text or symbols)

Line drawing of an iron (£) with steam spraying (no text or symbols)

Line drawing of a steam iron with cooling fins (no text or symbols)

Line drawing of a steam iron with six wheels (no text or symbols)

Line drawing of a steam iron with six wheels (no text or symbols)

Line drawing of an iron (£) with steam rising (no text or symbols)

Самоочищення праски

Line drawing of a steam iron on a stand (no text or symbols)

Important safety and proper handling instructions....50

Hints for ironing 51

Technical characteristics....51

Get to know your iron 51

How to fill the water 52

Preparation for operation – first time ironing ....52

After ironing 52

Spraying 52

Dry ironing 52

Steam ironing 52

Burst of steam 53

Burst of steam in vertical position 53

Self-cleaning....54

Draining the water 54

Cleaning and maintenance....54

Ecology – Environment protection ....55

Dear Clients,

Congratulations on your choice of our appliance, and welcome among the users of Zelmer products.

In order to achieve best possible results we recommend using exclusively original Zelmer accessories. They have been specially designed for this product.

Please read these instructions carefully. Pay your special attention to important safety instructions. Keep this User's Guide for future reference.

Important safety and proper handling instructions

Always keep these basic safety instruction during ironing:

The iron is intended for domestic usage only and you can use it solely according to herewith manual.

Remove any protective films or stickers from the sole plate and the cabinet.

Unwind and straighten the power cord before usage. –

Unplug before filling or emptying the water tank.

Fill the water using included vessel for water. —

Empty the tank after each usage. -

- If any part of the iron is damaged, it must be replaced by the manufacturer or its service agent or similarly qualified person in order to avoid a hazard.

If the non-detachable part of the cord is damaged, it should be replaced by the producer or at a proper service point or by a qualified person in order to avoid any hazards.

The appliance should be repaired by trained staff only. Improper repair can result in serious hazard for a user. In case of defects we recommend you to contact qualified service desk.

- Do not use the appliance when it is damaged or performs abnormally.

- Do not touch the iron rest during or just after ironing. It is hot!

- Avoid any contact of supplying cord with the iron rest.

- Connect the iron to a suitable mains supply outlet 220V–240V, with grounding.

The appliance generates high temperature. Use it carefully and warn – other users against possible hazard.

- Do not use an extension power cord set without grounding!

- Do not add perfumed, vinegar or other chemical liquids into the water tank; they can damage the appliance seriously.

- Do not immerse the appliance in water or any other liquid.

- Do not roll the power cord or supply cord around the iron unit or base console for storage until it has cooled down completely.

- Do not attempt to open the cabinet or dismantle any parts from the appliance.

- Use and place the appliance on a firm and steady surface.

- When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.

-Do not open water inlet during ironing.

- Keep special care when ironing in presence of children. Do not allow to touch the iron during ironing.

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

- Children should be supervised to ensure that they do not play with the appliance.

• The appliance is not intended to be operated by means of an external timer or separate remote-control system.
• Do not leave the appliance unattended when it is connected to a mains supply outlet or it is hot.
• The iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.
• If you do not use the iron, even for short time, switch it off, turning Temperature Dial in anti-clockwise direction to „MIN”.
• If you do not use the iron, even for short time, switch the steam function off, setting the knob on position.
• Never iron and clothes or fabrics that are being worn by human or pets.
  Never direct the steam to human or pets. – Use self-cleaning function at least once a month. –

Hints for ironing

1. Sort out the articles to be ironed according to the type of fabric. This will minimize the frequency of temperature adjustment for different garments.
2. Test ironing a small area on the backside or inside the garment if you are unsure about the type of fabric. Start with a low temperature and increase gradually.
3. Wait for about three minutes before ironing heat sensitive fabrics. Temperature adjustment needs certain time to reach the required level no matter it is higher or lower.
4. Delicate fabrics such as silk, wool, velour, etc. are best ironed with an ironing cloth to prevent shine marks.
5. You may need a few times of press to activate the spray, burst and vertically burst function.
6. Read the garment labels and follow the manufacturer's ironing instructions which are often shown by symbols similar to the following:

Temperature settings
○ Acetate○ Elastics○ Polyamide○ Polypropylene	○ Cupro ○ Triacetate○ Polyester ○ Viscose○ Proteins ○ Wool○ Silk	○ Cotton○ Linen

Technical data

The iron technical parameters are included at the name plate. The iron is I class appliance, equipped with supplying cord and plug with grounding. ZELMER iron meets the requirements of effective standards.

The appliance meets the requirements of the following directives:

-Low Voltage Device (LVD) - 2006/95/EC.

– Electro- Magnetic Compatibility (EMC) – 2004/108/EC.
The product is marked with CE symbol on the name plate.

Get to know your iron

1. Sole plate
2. Temperature Dial
3. Dial Pointer
4. Control light (red)
5. Water spraying nozzle
6. Water inlet cover
7. Steam control/
   self-cleaning knob
8. Water Spray Button
9. Burst of steam button
10. Cord grommet
11. Water vessel

How to fill with water

Disconnect the iron from mains supply outlet.

- Move the Steam Control Knob to (7) position.

Release the water inlet cover - (6) and fill water through the water inlet hole.

Fill up to the „-MAX" level marked on the side of the water tank.

- Close the water inlet cover (6).

Line drawing of a steam iron with a flag attached, showing internal components and handle (no text or symbols)

For best result, it is advisable to use demineralised water or distilled water.

Do not use chemically descaled water or any other liquids.

Preparation for operation– first time ironing

- Remove any protective films or stickers from the sole plate (1) and the cabinet.

— Unwind and straighten the power cord (12).

- Fill the water tank with demineralised water or distilled water. (See How To Fill Water).

- Connect the iron to a suitable mains supply outlet.

- Turn the Temperature Dial (2) in clockwise direction to ••• position - control light (4) glows.

- Control light goes off when the required temperature is reached.

- Move the Steam Control Knob (7) to ↑ position.

- Steam starts coming out from the holes in the sole plate after putting the iron in horizontal position and after Burst of steam knob (9).

- Begin first time ironing with an old towel.

- When the water tank is empty and there is no more steam produced; the preparation work is completed. The iron is now ready for proper use.

- Move the Temperature Dial (2) in anti-clockwise direction to „MIN"; the iron is switched off.

After ironing

- Move the Steam Control Knob (7) to ✗ position.

- Disconnect the iron from mains supply outlet.

- When the iron gets cool completely, store it vertically in a safe place.

Spraying

- This function can be used any time and is not affect any setting.

-Fill the water tank as described in How to Fill Water.

- Aim the nozzle (6) to the garment.

- Press the Spray Button (8).

Line drawing of an iron (£) with steam spraying (no text or symbols)

It may be necessary to press the spray button a few times to start this function.

Dry ironing – Always follow the garment manufacturer's ironing instructions mentioned at the garment label.

- Connect the iron to a suitable mains supply outlet.

- Turn the Temperature Dial (2) in clockwise direction to; set •, •• or ••• position.

– Control light (4) glows, indicating that the iron is on.

- Control light goes off when the required temperature is reached. The iron is now ready for use.

- After ironing move the Temperature Dial (2) in anti-clockwise direction to „MIN"; the iron is switched off.

- Disconnect the iron from mains supply outlet.

- When the iron gets cool completely, store it vertically in a safe place.

Steam ironing – Always follow the garment manufacturer's ironing instructions mentioned at the garment label.

- Fill the water tank. (See How To Fill Water).

- Connect the iron to a suitable mains supply outlet.

- Turn the Temperature Dial (2) in clockwise direction to ●●● position. (For optimum steam quality, do not use ● or ●● setting for steam ironing).

- Control light (4) glows, indicating that the iron is on.

- Control light goes off when the required temperature is reached. The iron is now ready for use.

- Move the Steam Control Knob (7) to selected position, in order to set the amount of steam.

• After finishing move the Temperature Dial (2) in anti-clockwise direction to „MIN”; the iron is switched off.
• Move the Steam Control Knob (7) to position. Disconnect the iron from mains supply outlet. - When the iron gets cool completely, store it - vertically in a safe place.

Line drawing of a steam iron with decorative base (no text or symbols)

Burst of steam – Always follow the garment manufacturer's ironing instructions mentioned at the garment label.

This function provides extra amount of steam to remove stubborn wrinkles at clothes and hanging garments.

Unwind and straighten the power cord. -

• Fill the water tank with demineralised water or distilled water. (See How To Fill Water)".
• Connect the iron to a suitable mains supply outlet.
• Move the Steam Control Knob (7) to selected position, in order to set the amount of steam.
• Turn the Temperature Dial (2) in clockwise direction to ••• position. See the item „Preparation for operation”.

– Control light (4) glows, indicating that the iron is on.

- Control light goes off when the required temperature is reached. The iron is now ready for use.

- Press the Burst of Steam Button (9) once – steam will shoot from the holes of the soleplate.

- For stubborn wrinkles, wait a few seconds before pressing the Burst of Steam Button (9) again. Most wrinkles can be removed within three presses.

Line drawing of a steam iron with five fans (no text or symbols)

ATTENTION: It may be necessary to press the burst of steam button a few times to start this function.

For optimum steam quality, do not operate the Burst Of Steam more than three times after the pilot light goes off.

Burst of steam in vertical position – Always follow the garment manufacturer's ironing instructions mentioned at the garment label.

This function provides extra amount of steam to remove wrinkles on delicate garments in hanging position, hanging curtains, or other hanging fabrics.

Warning:

Do not apply steam on any clothes or fabrics that are being worn by human or pets. Temperature of steam is very high.

• Fill the water tank with demineralised water, or distilled water. (See How To Fill Water)".
• Turn the Temperature Dial (2) in clockwise direction to ●●● position.
• Connect the iron to a suitable mains supply outlet. See the item "Preparation for operation".
  – Control light (4) glows, indicating that the iron is on.
• Control light goes off when the required temperature is reached. The iron is now ready for use.
• Move the Steam Control Knob (7) to ⬇ position.
  – Hold the iron between 15 and 30 centimetres away from the garment.
• Press the Burst of Steam Button (9) once – steam will shoot from the holes of the soleplate.
• For stubborn wrinkles, wait a few seconds before pressing the Burst of Steam Button (9) again. Most wrinkles can be removed within three presses.
• After finishing move the Temperature Dial (2) in anti-clockwise direction to "MIN"; the iron is switched off.
• Move the Steam Control Knob (7) to position.
• Disconnect the iron from mains supply outlet.
• When the iron gets cool completely, store it vertically in a safe place.

Line drawing of an iron (£) with steam rising (no text or symbols)

It may be necessary to press the burst of steam button a few times to start this function.

For optimum steam quality, do not operate the Burst Of Steam more than three times after the pilot light goes off.

Self-cleaning

This function removes the scales and minerals built up in the Steam Chamber. The iron will remain in the best condition if this function is performed at least once a month or more regularly depending on the hardness of the water used.

• Fill the water tank with demineralised water, or distilled water. (See How To Fill Water)". Fill it up to the half.
• Connect the iron to a suitable mains supply outlet (See the item „Preparation for operation”).
• Turn the Temperature Dial (9) in clockwise direction to „MAX“ position.

Control light (4) - glows, indicating that the iron is on.

• Control light goes off when the required temperature is reached. The iron is now ready for use.
• Wait for one more cycle; pilot light glows and goes off.
• After finishing move the Temperature Dial (9) in anti-clockwise direction to „MIN"; the iron is switched off.
  – Disconnect the iron from mains supply outlet.
  —Hold the iron horizontally over a sink.
• Move the Steam Control Knob (7) to self-cleaning position (Descaling).
• Steam and boiling hot water will drain from the holes on the soleplate washing away the scales and minerals that have built up inside the Steam Chamber.
• Gently move the iron back and forth until the water tank is empty.
• When Self-Cleaning is complete, release the Self-Cleaning Knob (7).
• Rest your iron back on its heel rest and allow to fully cool down.
• Wipe the soleplate with a cold damp cloth.

Caution!

Keep skin/body away from the hot water.

Draining the water

• Move the Steam Control Knob (3) to position.
• Disconnect the iron from mains supply outlet.
• Press the Burst of Steam Button (4), to release any trapped water when the soleplate still hot.
• Press the Spray Buttons (5), to release any trapped water.
• Turn the iron upside down and gently shake it to remove the remaining water.

Line drawing of a steam iron on a stand (no text or symbols)

Before storage make sure that Steam Control Knob (7) is in position.

Cleaning and maintenance

– Disconnect the iron from mains supply outlet.
- The iron should get cool completely before cleaning.
– Use a damp cloth and gentle washing liquid for cleaning.
- Do not use aggressive detergents like cream, milk, paste etc. to clean the casing. They can remove graphic symbols such as: scales, marking, caution signs, etc.

Never use sharp or rough objects to remove the deposits on the sole – plate.

- Never use any abrasive, vinegar or descaling agents to clean the iron.

Ecology – Environment protection

Each user can protect the natural environment. It is neither difficult nor expensive.

In order to do it: put the cardboard packing into recycling paper container; put the polyethylene (PE) bags into container for plastic.

When worn out, dispose the appliance to particular disposal centre, because of the dangerous elements of this appliance, which can be hazardous for natural environment.

Do not dispose into the domestic waste disposal!!!

The manufacturer/importer does not accept any liability for any damages resulting from unintended use or improper handling.

The manufacturer/importer reserves his rights to modify the product any time in order to adjust it to law regulations, norms, directives, or due to construction, trade, aesthetic or other reasons, without notifying in advance.