32Z010 - Blender Zelmer - Free user manual and instructions

Product Type	Blender
Brand	Zelmer
Model	32Z010
Dimensions (H x W x D)	400 x 180 x 180 mm
Weight	1.5 kg
Power Consumption	600 W
Voltage	220-240 V, 50/60 Hz
Jug Capacity	1.5 L
Jug Material	Plastic (BPA-free)
Blade Material	Stainless Steel
Number of Speed Settings	2 + Pulse
Main Functions	Blending, Mixing, Crushing Ice, Pureeing
Safety Features	Locking Lid, Non-Slip Feet, Overload Protection
Cleaning	Detachable jug and lid; dishwasher safe parts
Spare Parts Available	Jug, Blade Assembly, Lid, Seal Ring
Repairability Index	7.5/10
Warranty	2 Years

Frequently Asked Questions - 32Z010 Zelmer

How do I clean the Zelmer 32Z010 blender?

Disassemble the jug, lid, and blade assembly. Wash them with warm soapy water or place them on the top rack of the dishwasher. Wipe the motor base with a damp cloth. Do not immerse the base in water.

Can I crush ice in this blender?

Yes, the Zelmer 32Z010 has stainless steel blades that can crush ice. Use the pulse function for best results.

What is the maximum capacity for hot liquids?

Do not blend hot liquids above 60°C. Allow them to cool before blending to avoid pressure buildup.

How do I replace the blender jug?

Ensure the blender is unplugged. Remove the old jug by lifting it off the base. Place the new jug onto the base and twist to lock it into position.

Why is my blender not starting?

Check that the jug is properly locked onto the base and the lid is secure. Also ensure the speed dial is set to a valid position. If it still doesn't start, check the power cord and outlet.

Can I blend nuts into butter?

Yes, you can make nut butter using the pulse function. Scrape down the sides occasionally for even consistency.

Is the blender jug BPA-free?

Yes, the jug is made from BPA-free plastic.

What spare parts are available for the 32Z010?

Spare parts include the jug assembly, blade unit, lid, and sealing ring. Contact Zelmer customer service for purchase.

How do I remove the blade assembly for cleaning?

Unscrew the blade assembly from the jug by turning it counterclockwise. Handle with care as blades are sharp. Clean separately.

What is the warranty period?

The Zelmer 32Z010 comes with a 2-year warranty against manufacturing defects.

USER MANUAL 32Z010 Zelmer

Mintler blender with orange juice and fresh oranges on a white surface (no text or symbols visible)

P4	NETFLIKOJA JZYTOKANIA MKSER KELICHOWY Typ 32210	4-9
C7	NAVOK K POLTNI STOLNI MIXER Typ 32210	8-12
C8	NAVOK KA OBSLUHU STOLOVY MXER Typ 32210	13-15

HD	HASTNA AT UTASITAS KELYHES MIXER 32/18 Tipus	17-20
CO	KISTRUCTUM OF UTUSATE BLENDER STATIV Tip 32/2010	25-26
EU	HECTPENUEBO 34CRNATALAVI BLENDEEP Tom 32/2010	25-28

m = 311
m = 311
m = 311
1 + u1 - 1 = ( 1 + u) u1 < 1 = u
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311
m = 311

zelmer

www.istnet.pl

www.zelmar.com

A

B

C

PL

Szanowni Klienci!

Congratulations on your choice of our appliance, and welcome among the users of Zelmer products.

In order to achieve best possible results we recommend using exclusively original Zelmer accessories. They have been specially designed for this product.

Please read these instructions carefully. Pay your special attention to important safety instructions, in order to avoid accidents during operation and/or avoid damage of the appliance. Keep this Instruction for future reference.

Important safety instructions

Danger! / Warning!

Risk of injury

Always place the appliance on flat, plain surface.

Always unplug the appliance when it is not in use and before cleaning.

Do not operate the appliance if the cord, the housing or the handle is visibly damaged. In such a case, return the appliance to a service center.

the non-detachable part of the cord is damaged, it should be replaced by the producer or at a proper service point or by a qualified person in order to avoid any hazards.

The appliance should be repaired by trained staff only. Improper repair can result in serious hazard for a user. In case of defects we recommend you to contact qualified service desk.

Do not immerse motor housing in water or any other liquid; do not use it in bathroom and outdoors.

Press "Off" button, before you remove the lid of the jug and remove the jug from the motor housing, wait until the blades stop completely.

Do not use stand blender without feeder opening stopper.

Do not put your hands inside the jug, even if it is removed for cleaning, as the cutting blades are still dangerous – very sharp.

Do not put any objects (spoon, etc.) into the jug, when the blender is connected to power supply.

Do not wash the cutting blades directly with hand.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Warning!

Risk of property damage

●connect the appliance to 230 V mains supply.

Do not unplug by pulling on cord.

The supplying cord shall not be hanged over the edge of the table or board, nor touch any hot surface.

Do not fill the jug in with boiling liquids.

Keep the stand blender and supplying cord away from hot surfaces and burners.

it is possible, store the stand blender away from direct sun radiation and glow-like light.

Never store with lid closed on the blender jug. Damp the lid gasket with water before usage, and insert the lid on the jug.

Do not overflow the jug. In case the liquid gets under the motor housing, it can be vacuumed into the motor, causing its damage.

Do not fill the jug over 1250 ml mark – in such case, the content of the jug can lift the lid when the motor starts up

can be operated not longer than 3 minutes, without interruption in constant or pulsating mode ("Pulse" and "Ice Crush" features), otherwise it can get overheated. After 3 minutes of operation, switch off the appliance for at least 10 minutes, and let the motor cool down.

Do not operate when the jug is empty, as it can get overheated.

Use the soft brush for washing metal parts, especially the sharp blades.

Product information and tips on its use

Read the whole instruction for use before you start using your stand blender.

The stand blender is intended for domestic usage only. In case it is used for gastronomic business purposes, warranty terms and conditions change.

Make sure you understand well above mentioned instructions.

Safety recommendations

The stand blender has thermal protection, which turns off the device at the moment of overheating. In this case, it is necessary to disconnect the device from the power source.

Remove the plug from the contact, then wait at least 10 minutes, allowing the motor to cool down. After this time, you can re-attach the stand blender.

Specifications

You can find the appliance technical data on the name plate.

Admissible time of non-stop operation: 3 minutes.

An interval between repeated operations: 10 minutes.

Speed range: 1-14.

Noise level at gear 14: 90 dB/A.

The stand blender is built in II class of insulation

It does not require connecting to mains supply socket with earthing.

The stand blender meets the requirements of effective standards.

The appliance meets the requirements of the following directives:

Low Voltage Device (LVD) - 2006/95/EC. -

Electro- Magnetic Compatibility (EMC) - 2004/108/EC.

The product is marked with CE symbol on the name plate.

Outline (Fig. A)

1 Feeder opening stopper
2 Lid
3 Blender jug
4 Control light
5 „On“ switch
6 "Off" switch
7 „Pulse" switch
8 Handle
9 Blocking ring
10 Blades
11 Gasket
12 Motor housing
13 Speed control knob
14 "Ice Crush" button
15 Anti-slip flange

Handling and operation (Fig. B)

Before first usage (or after long storage) wash the jug (3), lid (2) and feeder opening stopper (1) in hot water with washing-up liquid, rinse and dry well. Keep your hands away from cutting blades (10) – they are sharp.

OPERATION MANUAL

① Place the motor housing (12) on dry, firm, and horizontal surface, near mains supply outlet and out of the reach of children.

Arrange the supplying cord so that it does not hang from the table or board and it can not be pulled or dragged by accident.

② Connect the plug into the mains supply outlet.
③ Place the jug (3) so, that the protrusions at the bottom part of the jug (3) were fitted with the protrusions in top part of motor housing (12).

The handle (8) of the blender jug (3) shall be placed on the right side of the appliance.

④ Put the ingredients into the jug (3). Do not fill in over 1250 ml marked on the blender jug (3). In such case, the content of the jug can lift the lid (2) when the motor starts up.
⑤ Insert the lid (2) on the jug (3) before you use the stand blender.
⑥ Turn the lid (2) counter-clockwise ("Lock" position) until it stops in the cut in the top part of the handle (8). Make sure, that the lid (2) is properly inserted in blender jug (3) it means that the protrusion at the lid (2) is aligned with the handle (8), otherwise remove it and assemble once again. When the lid is properly assembled, the control light (4) shall glow pulsating which means that the appliance is ready for use.

Before you insert the lid (2) moisture the lid gasket with water.

The motor driver is equipped with micro-switch, which enables the appliance operation only when the lid (2) is properly closed on the blender jug (3). Otherwise the motor shall not start up.

⑦ Insert the feeder opening stopper (1) on the feeder opening of the lid (2). Adjust the cuts on the stopper (1) with the arrow on the lid (2) while inserting the stopper (1) and turn it right or left until it runs in order to assemble it properly.

Do not start the stand blender without the feeder opening stopper (1), especially, when you use solid ingredients. They can be thrown out of the opening.

⑧ Press "On" button (5). Control light (4) shall permanently glow with red light, which means that the appliance is in operation.
⑨ Turn the speed control knob (13) into required position:

Speed	Dish	Instructions and recommendations
Speed 1 to 3	Frozen fruit pulp.	Place frozen fruit pulp inside the jug, with recommended amount of water (maximum 1250 ml). Mix for some seconds. Do not mix too long, in order to avoid appearing air bulbs.
	Preparing instant meals for people on diet: desserts, powdered milk, etc..	Place all ingredients in the jug. Operate the appliance (10 to 15 seconds) until you obtain homogenous consistence. At first operate with „Pulse” function in order to prevent appearing air bulbs.
	Vinaigrette sauce.	Start from cutting thick ingredients and herbs, operating short with „Pulse” function and then add remaining ingredients and mix with constant speed for 15 to 20 seconds. Make sure the blades are covered with the ingredients, to avoid splashing.
Speed Dish Instructions and recommendations
Speed 4 to 5	Milk shake with coffee, chocolate, vanilla, etc.	Place all ingredients in the jug. You can achieve the best results with 500 ml of milk. As they shall cause increasing of capacity, do not exceed 1000 ml of milk.
	Whipped cream. In order to fully cover the blades to avoid splashing use at least 250 ml of cream.
Speed 6 to 7	Pastes and spices for salads with quark or yoghurt.	Start from cutting thick ingredients and herbs, operating short with „Pulse” function and then add quark or yoghurt.
	Milk shake with fruits (raspberries, bananas, mango, etc.).	Place all ingredients inside the jug. You can achieve good results with 250 ml of cold milk. As it shall cause increasing of capacity, the maximum amount of milk is 1000 ml.
	Onion, shallot, etc.	Cut them into fourths and at first operate short with „Pulse” function. Maximum weight 300 g.
	Walnuts, hazelnuts, almonds.	Place the nuts inside the jug. At first operate short with „Pulse” function. In order to finish, switch to constant speed, to make them finer.
	Water biscuits, cookies, dry bread, toasts.	Cut the ingredients into big pieces. Place them in the jug and at first operate short with „Pulse” function, then switch for some seconds constant speed.
Speed 8 to 10	Tomato paste or sauce.	Place all the ingredients inside the jug (at first liquid ingredients). Make sure the blades are covered with the ingredients, to avoid splashing.
	Boiled vegetable puree.	Insert the vegetables for cooking. In case the ingredients are too thick, at first operate short with „Pulse” function. It is not recommended to use the jug blender to prepare potato puree.
	Vegetable stuffing.	Put all the ingredients into the jug (at first liquid ingredients). Operate short using „Pulse” function, if the mixture is too thick.
	Parmesan and hard cheese.	Cut cheese in big cubes and grind it up to the moment you achieve desired consistence. At first operate using „Pulse” function for each trick piece.
	Compote boiled of fresh fruit and sauce made of fresh fruit.	Place all ingredients inside the jug. Make sure the blades are covered with the ingredients, to avoid splashing.
Speed 11 to 14	Different soups.	Place all ingredients (raw or boiled) inside the jug, without exceeding 1250 ml. Mix approximately 1 minute.
	Fresh fruit shake	Peal the fruit and remove the Stones. Slice the fruit into big pieces. Put all ingredients into the jug and mix approximately 1 minute.

⑩ „Pulse” function

• Dressing „Pulse” (7) button shall cause short operation with maximum speed, disregarding set blades speed. „Pulse” (7) button is pressed with a spring. When we stop pressing it, the appliance shall stop the operation. Use „Pulse” (7) as you like, but remember, that it works with maximum speed, so you have to control what is going on with the ingredients, unless you want to achieve a pulp.
  Do not operate longer than 3 minutes, otherwise it can get overheated. After 3 minutes, switch it off for at least 10 minutes, so that the engine cools down.
  you need to add some new ingredients during blender operation, turn and lift feeder opening stopper (1), feed the ingredients into the opening, then replace the stopper again (1) and turn it left or right until it runs.
  Make sure, that the ingredients you add, shall not increase the capacity inside the jug exceeding 1250 ml marking on the jug (3).

⑪ „Ice Crush" function

Check if the stand blender is clean, before you use it for crushing ice. Otherwise wash it thoroughly with clean water. Any residues of washing agent can influence the taste of crushed ice and shall cause that the drink we add the ice to, shall loose its taste.

case you want to crush ice, use 6 to 10 ice cubes in given time, and then add 15 ml (1 spoon) fresh cold water.

Insert the lid (2) including feeder opening stopper (1) on the appliance and turn it counter clockwise ("Lock" position). Press the "Ice Crush" (14) button 3 or 4 times, with short intervals between pressing. Too long crushing time makes the ice become water; too short time shall crush the edges/corners of the ice cubes only. Do not try to crush the ice without adding some water into the jug.

⑫ Press „Off“ (6) button, before you remove the lid (2) from the jug (3) or remove the jug (3) from the motor housing (12); wait until the cutting blades (10) stop.

After operation

Hold the motor housing (12) with one hand, catch the handle (8) with the latter hand, then lift the jug (3) up and remove it from the motor housing (12).
Remove the lid (2) from the jug (3) turning it clockwise ("Open" position).
Unplug the appliance from the mains supply outlet when it is not in use.

Cleaning and maintenance (Fig. C)

① Unplug from the mains supply outlet before cleaning. Clean after operation as soon as possible, to prevent the pulp accumulation inside the jug (3).
② To clean the jug and the blades it is recommended to apply self-cleaning function. Pour about 1 litre of water into the jug (3) and start up the appliance for approximately 30 seconds at lowest speed applying safety instructions. Then empty the jug (3), turn it upside down and dry it.
③ If necessary, clean the jug (3), lid (2), feeder opening stopper (1) and blades (10) in warm water with wash-up liquid. Then rinse it under clean running water and dry. At first disassemble cutting unit (10) (see „Cutting unit disassembling”).

you left the jug for longer time without cleaning and some particles glued to the jug inner, use nylon brush.

We do not recommend cleaning the jug (3), blades (10), lid (2) and feeder opening stopper (1) in dish washer. Aggressive cleaning agents applied in such device can influence negative the surface conditions.

④ Clean the outsider of the motor housing (12) with damp, gentle cloth.

not immerse the motor housing (12) in water or other liquid.

Do not clean the outside of the housing (12) with aggressive detergents such as emulsion milk or pastes, etc. They can remove information graphic symbols.
Do not clean the transparent jug (3) with harsh sponges or clothes.
After washing dry thoroughly all the parts of the appliance.

CUTTING UNIT DISASSEMBLING

Unplug from the mains supply outlet.
Empty the jug (3).
Remove the lid (2) from the jug (3) turning it clockwise ("Open" position).
Turn the jug (3) upside down and place the appliance on flat, plain surface.
Turn the blocking ring counter clockwise. Remove carefully with a gasket.

cutting blades are sharp. Handle them carefully.

CUTTING UNIT ASSEMBLING

Burn the blades upside down in order to assemble them and insert at first the gasket at the jug opening flange (3) and blades inside the jug (3).
Insert blocking ring and turn it clockwise until it runs, when the protrusion on blocking ring gets to the handle (8). Make sure that the blocking ring is screwed to the jug (3). It influences the tightness of the connection.
After assembling, turn the jug (3) upside down and place

it on the motor housing (12) so, that the protrusions in bottom part of the jug (3) are fitted with the protrusions top part of the motor housing (12).

The handle (8) of the blender jug (3) shall be placed on the right side of the appliance.

Ecology – environment protection

Each user can protect the natural environment. It is neither difficult nor expensive.

In order to do it: put the cardboard packing into recycling paper container; put the polyethylene (PE) bags into container for plastic.

When worn out, dispose the appliance to particular disposal centre, because of the dangerous elements of this appliance, which can be hazardous for natural environment.

Do not dispose into the domestic waste disposal!!!

The manufacturer/importer does not accept any liability for any damages resulting from unintended use or improper handling. The manufacturer/importer reserves his rights to modify the product any time in order to adjust it to law regulations, norms, directives, or due to construction, trade, aesthetic or other reasons, without notifying in advance.

Notes