Question 1

How to properly install the carrycot on the chassis of the RED CASTLE SHOP N JOGG DISC II stroller?

Accepted Answer

To install the RED CASTLE SPORT carrycot on the SHOP N JOGG DISC II chassis, you must first ensure that the chassis is fully unfolded and locked in the open position. Also, check that all the attachment points on the chassis, located on the sides and side posts, are completely clear and clean.

The RED CASTLE SPORT carrycot is equipped with attachment adapters specifically designed for this stroller. These adapters, provided with your carrycot, attach without the need for tools. Position the carrycot directly above the chassis, ensuring that it is facing forward.

Then align the attachment devices located under the carrycot with the anchor points provided on the side posts of the chassis. This alignment is crucial to ensure a secure attachment. Once the points are aligned, press the carrycot firmly down onto the chassis until you hear a distinct click on each side, confirming that the locking is fully engaged.

After installation, perform an essential safety check: gently pull the carrycot upwards to ensure that it does not move and is securely attached to the chassis. If the carrycot moves or you did not hear the locking clicks, restart the installation ensuring that all attachment points are perfectly aligned and that you are pressing with enough force.

Check that the carrycot is stable and has no lateral play. This stability is essential for your child's safety. Remember that the maximum weight supported by the RED CASTLE SPORT carrycot is 9 kg, which corresponds to the recommended capacity for children from birth to about 6 months. Before each use, double-check that all attachment mechanisms are properly engaged.

Question 2

What are the adapters for fixing the cosy onto the chassis of the RED CASTLE SHOP N JOGG DISC II?

Accepted Answer

The adapters for the RED CASTLE SHOP N JOGG DISC II are essential accessories that allow you to attach the cosy (car seat) to the stroller chassis. They quickly attach to the side frames of the chassis and ensure a secure and stable connection between the car seat and the stroller structure.

Main functions of the adapters:

Quick and secure attachment: The adapters allow you to clip and unclip the cosy in a matter of seconds, without using any tools. Once properly engaged, they prevent any risk of accidental detachment of the seat.
Maintaining optimal tilt: They ensure that the cosy remains at the ideal angle once attached to the stroller, whether in a reclined position (for newborns) or in a sitting position (for larger babies).
Compatibility with RED CASTLE car seats: The adapters allow the use of the RED CASTLE SPORT/RECARO group 0+ (up to 13 kg), the RED CASTLE SPORT carrycot (up to 9 kg), or the RCS group 0 seat (up to 9 kg).

Installation of the adapters: The adapters must be attached to the designated fixing points on the side frames of the chassis. During the first use, check that each adapter is properly engaged before placing the cosy. You should hear a "click" confirming that the cosy is securely attached.

Important for safety: Before starting your outings or jogging sessions, always test the stability of the cosy by applying a slight upward pressure. This ensures that the adapters have securely held the seat and that your child is safe. Remember that the SHOP N JOGG DISC II should always be used with only one child at a time.

Question 3

How to install the carrycot on the wheel chassis of the RED CASTLE SHOP N JOGG DISC II?

Accepted Answer

To correctly install the RED CASTLE SPORT carrycot on your RED CASTLE SHOP N JOGG DISC II stroller, you must use the attachment adapters that are provided with your equipment. First, ensure that the carrycot and chassis are in good condition and that all parts are clean before starting the installation.

Installation steps:

Identify the anchor points located on the sides of the chassis, near the attachment area. These points correspond to the adapters designed for this purpose.
Position the carrycot directly above the chassis, ensuring that it is facing the front of the stroller so that your baby can see you during your jogging or walks.
Align the attachment devices located under the carrycot with the anchor points of the chassis.
Press firmly on the carrycot to snap it onto the anchor points. You should hear a distinct click indicating that the carrycot is securely locked.

Safety check: Once the installation is complete, test the stability of the carrycot by gently pulling on it. It should not move at all. If you notice any mobility, reposition the carrycot and try again until you achieve a solid snap with an audible locking click.

Important points to remember: Never lift your stroller by the carrycot; always use the chassis to avoid any damage. Before folding your stroller, always remove the carrycot. The RED CASTLE SPORT carrycot is designed for newborns up to 9 kg. Always check before each use that the attachment devices are securely locked, as this ensures your child's safety during your active outings or walks.

User manual RED CASTLE : user manuals and guides in PDF

Models RED CASTLE most viewed

Browse manuals RED CASTLE by appliance type

Recent questions about devices RED CASTLE