Q: How to change the speed modes of the Synergy 5 MKII?

To change the speed modes on your Valk Synergy 5 MKII: Quickly press the power button twice to cycle through the three available speed modes: ECO Mode - Maximum speed of 6 km/h, maximum range D Mode (Standard) - Maximum speed of 15 km/h, moderate range S Mode (Sport) - Maximum speed of 25 km/h, optimal speed but reduced range The icon of the active mode is displayed on your dashboard, allowing you to see which mode is currently activated. Bonus tip: You can also activate constant speed control by holding the throttle at the desired speed for 5 seconds.

Q: How do I turn the headlights on and off on the Valk MX7?

To turn on the headlights of your Valk MX7, press and hold the headlight button (marked "D") on the handlebar control panel for about 3 seconds. When the lighting is activated, a lamp icon will appear on the screen. To turn off the headlights , press the same button again for 3 seconds.

Question 1

How to change the speed modes of the Synergy 5 MKII?

Accepted Answer

To change the speed modes on your Valk Synergy 5 MKII:

Quickly press the power button twice to cycle through the three available speed modes:

ECO Mode - Maximum speed of 6 km/h, maximum range
D Mode (Standard) - Maximum speed of 15 km/h, moderate range
S Mode (Sport) - Maximum speed of 25 km/h, optimal speed but reduced range

The icon of the active mode is displayed on your dashboard, allowing you to see which mode is currently activated.

Bonus tip: You can also activate constant speed control by holding the throttle at the desired speed for 5 seconds.

Question 2

How do I turn the headlights on and off on the Valk MX7?

Accepted Answer

To turn on the headlights of your Valk MX7, press and hold the headlight button (marked "D") on the handlebar control panel for about 3 seconds. When the lighting is activated, a lamp icon will appear on the screen.

To turn off the headlights, press the same button again for 3 seconds.

Question 3

How to adjust the maximum speed of the Valk MX7 with the throttle control?

Accepted Answer

Yes, the maximum speed of your Valk MX7 can be adjusted. Your bike is equipped with a throttle speed control, and you can set a custom speed limit through the specialized settings of the system.

Default speed: The system is configured by default for a cut-off assistance speed of 25 km/h. It is at this speed that the pedal assistance automatically stops.

How to adjust the speed limit:

Access the display settings (control screen)
Navigate to Special Functions (P0^8)
Set the desired value to customize your speed limit

Important: Values above 25 km/h are generally not recommended, as they exceed the legal limits for electric bikes in most countries. The system allows you to set them, but they will remain practically ineffective due to these legal restrictions.

For the detailed procedure to access the Special Functions tailored to your display model, refer to the Display/Controls Setup section of your manual.

User manual Valk : user manuals and guides in PDF

Models Valk most viewed

Browse manuals Valk by appliance type

Recent questions about devices Valk