Question 1

Does the LISTO 32HD843 television have Wi-Fi connectivity?

Accepted Answer

No, the LISTO 32HD843 does not have built-in Wi-Fi or Ethernet connectivity. It is a basic LED television without native internet connectivity.

The available connections on this model are:

2x HDMI ports (rear and side)
1x USB port (side)
1x AV connection (side)
1x VGA port (for PC connection)
Audio output and headphone jack
CI slot for conditional access module

To access streaming services or internet content (YouTube, Netflix, etc.), you need to connect an external device via HDMI: decoder, TV box, HDMI stick (Chromecast, Fire Stick, etc.) or game console. It is this external device that will provide Wi-Fi or network connectivity.

Question 2

What does the message "device error during recording" mean on a LISTO AM L2 and how can I resolve this issue?

Accepted Answer

The message "device error during recording" on your LISTO AM L2 generally indicates a problem related to the storage device used to save data. Here are several possible causes and solutions to check:

1. Check the storage device

Make sure that the external hard drive, USB stick, or any other storage medium is properly connected to the device.
Unplug and then replug the device to check the connection.
Test the device on another machine to confirm that it is working properly.

2. Available space on the device

Check that the device has enough free space to save new files.
Delete unnecessary files if needed to free up space.

3. Device format

The LISTO AM L2 may require a specific format (e.g., FAT32, NTFS, etc.) to recognize the device.
If the format is not compatible, reformat the device to a supported format (note that this will erase all data).

4. Ports and connections

Try another USB port on the device to rule out a hardware issue with the port.
Avoid using USB hubs or adapters that may cause interference.

5. Firmware update

Check if a firmware update is available for your LISTO AM L2, as this may fix bugs related to the management of storage devices.

By following these steps, you should be able to identify and resolve the cause of the recording error. If the problem persists, it may be helpful to contact a specialized technical service for a thorough diagnosis.

Question 3

How do I find the SSID to connect my LISTO 32HD843 television to the Wi-Fi network?

Accepted Answer

The SSID is the name of your Wi-Fi network, necessary to connect your LISTO 32HD843 television to the Internet. Here’s how to find it:

1. On your Wi-Fi router

Router label: Most routers have a label stuck on the bottom or side indicating the network name (SSID) and the default password.
Configuration interface:
1. Open a web browser on a device connected to the network.
2. Enter the router's IP address (often 192.168.1.1 or 192.168.0.1).
3. Log in with your credentials (often “admin”/“admin” by default).
4. In the Wi-Fi settings, you will find the SSID of the network.

2. On a device already connected

Smartphone or tablet: In the Wi-Fi settings, the list of available networks displays the SSID. The network you are connected to is usually marked.
Computer:
- Windows: Click on the Wi-Fi icon in the taskbar to see available networks.
- Mac: Click on the Wi-Fi icon in the menu bar to see the active network.

3. If you have difficulty

If you cannot find the SSID, you can contact your Internet service provider for the necessary information.

Once the SSID is identified, you can use it to connect your LISTO 32HD843 television to your Wi-Fi network via the television's network settings.

Question 4

What should I do if my LISTO 32HD843 television displays the message "No network ID" and does not detect a Wi-Fi network?

Accepted Answer

The message "No network ID" on your LISTO 32HD843 television generally indicates that a device is not detecting an available network. It is important to note that the LISTO 32HD843 is a basic LED television without built-in Wi-Fi or Ethernet connectivity according to the manufacturer's official specifications. The available connectors on this model are only: 2 x HDMI, 1 x USB, 1 x AV, 1 x VGA, and 1 x audio output.

If this message appears on your LISTO television: It likely comes from an external device connected to your television via HDMI or the AV connection, such as a TNT decoder, a TV box, an internet box, a gaming console, or any other network device. It is this equipment that is attempting to connect to your Wi-Fi or Ethernet network and is displaying the error message.

Checking your router and Wi-Fi signal: Start by checking that your router is powered on and functioning properly. Ensure that the Wi-Fi function is enabled on the router and that the signal is stable. Test the Wi-Fi connection with another device like a smartphone or tablet to confirm that the network is detectable and that the connection works. Note the exact name of your network (SSID) and check that the SSID is not hidden, as a hidden network will be more difficult to detect.

Restarting the faulty external device: Unplug the device that displays the message "No network ID" for 30 seconds, then plug it back in. Wait 1 to 2 minutes for it to fully restart and automatically resume searching for available networks. Also restart your router in the same way to reset the connection.

Positioning and distance: Ensure that your external device is positioned at a reasonable distance from the Wi-Fi router to receive a stable signal. Avoid physical obstacles such as thick walls, metal doors, or metal objects between the device and the router, as they significantly weaken the Wi-Fi signal.

Manual network configuration: If restarting does not resolve the issue, access the network configuration menu of your external device. Look for the Wi-Fi or network configuration option and attempt a manual connection. Select your Wi-Fi network from the list of available networks and enter your password correctly. Be sure to check for uppercase and lowercase letters in the password, as well as any spaces.

Software update: If your external device has an automatic or manual update feature, check that it has the latest available software version. Updates can fix detection and network connection issues. Refer to the specific manual of your external device for detailed troubleshooting and network configuration steps, as each device has its own settings and menus.

Question 5

How to resolve the network detection issue on a LISTO 32HD843 television?

Accepted Answer

If your LISTO 32HD843 television does not detect any network, here are several steps to follow to identify and resolve this issue:

1. Check the Internet connection and the router

Make sure your Wi-Fi router is turned on and functioning properly.
Test the Internet connection with another device (smartphone, computer) to confirm that the network is active.

2. Restart the television

Turn off the television and unplug it from the electrical outlet.
Wait about 30 seconds, then plug it back in and turn the device on.

3. Check the television's network settings

Press the Menu button on the remote control.
Go to Settings or Configuration, then to the Network or Internet Connection section.
Make sure Wi-Fi is enabled and that the television is set to search for wireless networks.
Start a new search for available networks.

4. Check the type of connection

If you are using a Wi-Fi connection, ensure that the television is not set to Ethernet (wired) mode.
Conversely, if you have an Ethernet cable, check that the cable is properly connected and functional.

5. Enter the Wi-Fi password correctly

If the network appears, select it and enter the password carefully.
Ensure that uppercase and lowercase letters are respected (be mindful of the

User manual LISTO : user manuals and guides in PDF

Models LISTO most viewed

Browse manuals LISTO by appliance type

Recent questions about devices LISTO