What does the message "device error during recording" mean on a LISTO AM L2 and how can I resolve this issue?

Question

Accepted Answer

The message "device error during recording" on your LISTO AM L2 generally indicates a problem related to the storage device used to save data. Here are several possible causes and solutions to check:

1. Check the storage device

Make sure that the external hard drive, USB stick, or any other storage medium is properly connected to the device.
Unplug and then replug the device to check the connection.
Test the device on another machine to confirm that it is working properly.

2. Available space on the device

Check that the device has enough free space to save new files.
Delete unnecessary files if needed to free up space.

3. Device format

The LISTO AM L2 may require a specific format (e.g., FAT32, NTFS, etc.) to recognize the device.
If the format is not compatible, reformat the device to a supported format (note that this will erase all data).

4. Ports and connections

Try another USB port on the device to rule out a hardware issue with the port.
Avoid using USB hubs or adapters that may cause interference.

5. Firmware update

Check if a firmware update is available for your LISTO AM L2, as this may fix bugs related to the management of storage devices.

By following these steps, you should be able to identify and resolve the cause of the recording error. If the problem persists, it may be helpful to contact a specialized technical service for a thorough diagnosis.

User manual LISTO TV Decoder : user manuals and guides in PDF

Models LISTO TV Decoder most viewed

Other categories LISTO

Recent questions about TV Decoder LISTO