Q: What are the exact technical specifications of the power supply for the SONORO CD 2 to find a replacement adapter?

The original power supply for the SONORO CD 2 has the reference S048CM1550290 and has exactly these specifications: Output: 15.5V DC, 2.9A Input: 100-240V AC, 50/60 Hz (internationally compatible) Connector: DC 15.5V with removable universal adapter (compatible with EU and UK plugs) Important: The manual for the SONORO CD 2 expressly recommends using only the supplied power supply. An adapter with different voltages may damage the device. Where to find a replacement: Original power supply: Contact SONORO directly or an authorized dealer and request the model S048CM1550290 Universal adapter: If you find an adjustable universal external power supply, set it precisely to 15.5V and ensure that the DC connector is compatible with the device's port To avoid any risk of incompatibility, purchasing the original power supply remains the safest solution.

Q: What cable and power adapter are needed for the SONORO CD 2 radio?

The SONORO CD 2 operates with an external power supply (model S048CM1550290 ) with the following specifications: Input: 100-240V AC, 50/60 Hz Output: 15.5V DC, 2.9A The power supply comes with a removable universal adapter compatible with EU (European) and UK sockets. The adapter must be attached to the power supply before using the radio. Important: Only use the power supply provided in the box. Do not replace the adapter with another model, as this could damage the device.

Question 1

What are the exact technical specifications of the power supply for the SONORO CD 2 to find a replacement adapter?

Accepted Answer

The original power supply for the SONORO CD 2 has the reference S048CM1550290 and has exactly these specifications:

Output: 15.5V DC, 2.9A
Input: 100-240V AC, 50/60 Hz (internationally compatible)
Connector: DC 15.5V with removable universal adapter (compatible with EU and UK plugs)

Important: The manual for the SONORO CD 2 expressly recommends using only the supplied power supply. An adapter with different voltages may damage the device.

Where to find a replacement:

Original power supply: Contact SONORO directly or an authorized dealer and request the model S048CM1550290
Universal adapter: If you find an adjustable universal external power supply, set it precisely to 15.5V and ensure that the DC connector is compatible with the device's port

To avoid any risk of incompatibility, purchasing the original power supply remains the safest solution.

Question 2

What cable and power adapter are needed for the SONORO CD 2 radio?

Accepted Answer

The SONORO CD 2 operates with an external power supply (model S048CM1550290) with the following specifications:

Input: 100-240V AC, 50/60 Hz
Output: 15.5V DC, 2.9A

The power supply comes with a removable universal adapter compatible with EU (European) and UK sockets. The adapter must be attached to the power supply before using the radio.

Important: Only use the power supply provided in the box. Do not replace the adapter with another model, as this could damage the device.

Question 3

How to manually fine-tune the reception of a pre-programmed radio station on the SONORO Prestige SO-3310?

Accepted Answer

To fine-tune the reception of a pre-programmed radio station on the SONORO Prestige SO-3310:

Recall the pre-programmed station

Start by accessing the pre-programmed station by pressing the FAV button or one of the favorite keys (1-4 on the device, 0-9 on the remote control according to the preset number).

Manual tuning

Once the station is recalled, use the navigation button to finely adjust the frequency and optimize reception. Press and hold the navigation button to activate manual tuning mode, then use the same button to step through the frequency until you achieve the best signal.

Physically optimize the antenna

For better reception, extend the telescopic rod antenna and orient it to achieve optimal reception. For even better reception, you can connect the PRESTIGE to a suitable indoor antenna.

Eliminate interference

If reception remains difficult despite fine-tuning:

Move the device away from sources of electronic interference (Wi-Fi, appliances)
Reposition the telescopic FM/RSN antenna
Try another area of the room

Note: The device also has an automatic tuning feature if you prefer to quickly search for an available station rather than fine-tune manually.

Question 4

How to adjust the screen brightness on the SONORO CD 2 radio using the Menu button?

Accepted Answer

To adjust the screen brightness on your SONORO CD 2 radio, access the basic settings menu by pressing the [SETUP] button on the device or the remote control. The screen will then display the [Setting Values] menu.

Use the [Fast Forward] or [Rewind] buttons (or turn the control knob) to scroll through the different menu entries until you reach [Screen Dimmer Setting]. Then briefly press the control button or the [OK] button on the remote control to open this option.

You can then choose between two brightness levels:

Bright Screen: level 08 to 15 for a brighter display
Dark Screen: level 01 to 08 for a dimmer display

The screen has an ambient light sensor located near the display. It automatically detects the brightness of your environment and adjusts the display according to the setting you have chosen. This means that the screen will automatically adjust between the levels you have set, providing optimal visual comfort in different environments, whether in a dark or bright room.

To exit the menu and save your settings, briefly press the [SETUP] button. If no action is taken for 10 seconds, the menu will automatically close.

User manual SONORO : user manuals and guides in PDF

Models SONORO most viewed

Browse manuals SONORO by appliance type

Recent questions about devices SONORO