Q: How do I adjust the microphone volume on the Trevi XF 150 KB?

First, plug in the provided microphone into the MIC(11) jack on the speaker. The microphone volume is adjusted using the Volume button (4) located on the main unit: Turn the knob to increase or decrease the microphone volume Press this same button multiple times to access other settings (microphone volume, echo, and delay) Then turn the knob to select and adjust the desired setting You can also use the VOL+ and VOL- buttons on the provided remote control for quicker adjustments.

Q: How do I adjust the microphone volume on the Trevi XF 150 KB?

First, plug in the provided microphone into the MIC(11) jack on the speaker. The microphone volume is adjusted using the Volume button (4) located on the main unit: Turn the knob to increase or decrease the microphone volume Press this same button multiple times to access other settings (microphone volume, echo, and delay) Then turn the knob to select and adjust the desired setting You can also use the VOL+ and VOL- buttons on the provided remote control for quicker adjustments.

Q: How to resolve a charging issue with the Trevi FRS 1380 R?

First, check the USB cable : The FRS 1380 R charges via a 5V USB port. Ensure that the provided cable is not damaged, that the connection is securely plugged in, and that no debris is blocking the USB port of the receiver. Test another power source : Try connecting the FRS 1380 R to another USB port (computer, USB wall adapter, external battery). This will help you determine if the issue is with the cable, the port of your receiver, or the original power source. Clean the USB port : Use a soft, dry cloth (following the maintenance tips in the manual) to gently clean the USB port of the receiver and the connectors of the cable. A buildup of dust or moisture can prevent charging. Check the LED indicator : When charging, the LED indicator on the FRS 1380 R should display a light signal. If no change is visible, this confirms a charging issue. If the receiver still does not charge after these checks, the fault may be with the internal charging circuit of the FRS 1380 R. In this case, contact the manufacturer's support with the elements you have tested.

Q: How to turn on or off the flashlight of the Trevi FLEX Plus 100 3G?

Turning on or off the flashlight on the Trevi FLEX Plus 100 3G is very simple. The phone offers two methods to control the flashlight function (using the 13 MP rear camera LED flash). Method 1: Via the Torch menu From the home screen, press the multi-function button MENU . Navigate to the Torch option using the navigation keys and confirm with the OK button. In this menu, you can turn the flashlight on or off directly. Method 2: Quick access with button 0 For quicker access, press and hold the 0 button from the home screen. This action immediately toggles the flashlight between on and off, without going through the menu. These two methods allow you to control the flashlight effectively depending on whether you want quick access or classic navigation. The LED flash works well in both Photo mode and Torch mode, and the phone's 3000 mAh battery can support prolonged use of this function.

Question 1

How to turn off the speaker lights on the Trevi CMP 588 DAB?

Accepted Answer

To turn off the speaker lights on your Trevi CMP 588 DAB, access the system menu:

Enter the System menu
Select Backlight
Look for the SPK-Light (Speaker Light) option
Choose Off to turn off the illumination of the speakers

The illumination of the speakers can thus be turned on or off according to your preferences. To turn it back on, follow the same procedure and select On.

Question 2

How many pages does the manual for the Trevi CMP 576 DAB have?

Accepted Answer

The manual for the Trevi CMP 576 DAB in PDF format has a total of 28 pages.

For printing, you will need:

28 sheets of paper if you print in single-sided mode
14 sheets of paper if you print in double-sided mode (double-sided printing, more economical)

The manual in French covers all the features of this multifunction radio (CD player, cassette, USB, DAB+, FM, and tuner) as well as the setup, usage, and maintenance procedures.

Question 3

How do I adjust the microphone volume on the Trevi XF 150 KB?

Accepted Answer

First, plug in the provided microphone into the MIC(11) jack on the speaker.

The microphone volume is adjusted using the Volume button (4) located on the main unit:

Turn the knob to increase or decrease the microphone volume
Press this same button multiple times to access other settings (microphone volume, echo, and delay)
Then turn the knob to select and adjust the desired setting

You can also use the VOL+ and VOL- buttons on the provided remote control for quicker adjustments.

Question 4

How do I adjust the microphone volume on the Trevi XF 150 KB?

Accepted Answer

First, plug in the provided microphone into the MIC(11) jack on the speaker.

The microphone volume is adjusted using the Volume button (4) located on the main unit:

Turn the knob to increase or decrease the microphone volume
Press this same button multiple times to access other settings (microphone volume, echo, and delay)
Then turn the knob to select and adjust the desired setting

You can also use the VOL+ and VOL- buttons on the provided remote control for quicker adjustments.

Question 5

How to resolve a charging issue with the Trevi FRS 1380 R?

Accepted Answer

First, check the USB cable: The FRS 1380 R charges via a 5V USB port. Ensure that the provided cable is not damaged, that the connection is securely plugged in, and that no debris is blocking the USB port of the receiver.

Test another power source: Try connecting the FRS 1380 R to another USB port (computer, USB wall adapter, external battery). This will help you determine if the issue is with the cable, the port of your receiver, or the original power source.

Clean the USB port: Use a soft, dry cloth (following the maintenance tips in the manual) to gently clean the USB port of the receiver and the connectors of the cable. A buildup of dust or moisture can prevent charging.

Check the LED indicator: When charging, the LED indicator on the FRS 1380 R should display a light signal. If no change is visible, this confirms a charging issue.

If the receiver still does not charge after these checks, the fault may be with the internal charging circuit of the FRS 1380 R. In this case, contact the manufacturer's support with the elements you have tested.

Question 6

How to turn on or off the flashlight of the Trevi FLEX Plus 100 3G?

Accepted Answer

Turning on or off the flashlight on the Trevi FLEX Plus 100 3G is very simple. The phone offers two methods to control the flashlight function (using the 13 MP rear camera LED flash).

Method 1: Via the Torch menu
From the home screen, press the multi-function button MENU. Navigate to the Torch option using the navigation keys and confirm with the OK button. In this menu, you can turn the flashlight on or off directly.

Method 2: Quick access with button 0
For quicker access, press and hold the 0 button from the home screen. This action immediately toggles the flashlight between on and off, without going through the menu.

These two methods allow you to control the flashlight effectively depending on whether you want quick access or classic navigation. The LED flash works well in both Photo mode and Torch mode, and the phone's 3000 mAh battery can support prolonged use of this function.

Question 7

Can I connect Bluetooth headphones to the Trevi CMP 588 DAB?

Accepted Answer

Yes, you can definitely connect Bluetooth headphones to the Trevi CMP 588 DAB.

How to pair Bluetooth headphones:

Turn on the Bluetooth function on your headphones or on the device you want to pair
The radio will automatically recognize the nearby Bluetooth device
If a password is requested, enter 0000

The radio has Bluetooth connectivity in the 2.4 GHz band. Once paired, you will be able to listen directly through your wireless headphones.

Alternatives if you do not have Bluetooth headphones:

Wired headphones: plug them into the headphone jack of the radio
External device: use the AUX IN input

Question 8

How to memorize FM stations on the Trevi DR 7F40 BT radio?

Accepted Answer

The Trevi DR 7F40 BT radio automatically memorizes FM stations through a smart channel search. Here’s how to proceed:

First use - Automatic search and memorization:

Fully extend the retractable antenna by pulling it upwards
Press the button (7) or briefly press the FM button to switch to radio mode
Press and hold the button (8) for several seconds to start the automatic station search
The system automatically searches for all available FM stations (87.5-108 MHz) and saves them in memory
During the search, briefly press the button (8) if you want to stop before it finishes

After automatic memorization:

The radio automatically plays the first program found after the search
Use buttons (9) and (10) to navigate between the memorized previous/next stations
You can also quickly press the numeric keys 0-9 on the keypad to directly access a memorized station by its number (for example, press "1" then "0" for station 10)
Make sure the entered number does not exceed the total number of stations found, otherwise the selection will be invalid

Tips: For better reception of FM stations, keep the retractable antenna fully extended and adjust the direction of the device if the signal is not optimal.

Question 9

How do I set the language to Italian on the Trevi XT 101 BT speaker?

Accepted Answer

The Trevi XT 101 BT speaker does not have a function to change the user interface language. This device is an amplified speaker without a display screen or settings menu: it is equipped only with physical control buttons for essential functions (power, volume, mode, and lighting).

The technical manual is provided in several languages (Italian, French, English, German, and Spanish), but the device itself does not offer any language setting options. Since the XT 101 BT lacks voice commands, text display, and a navigable menu interface, the concept of language does not apply to this model.

To properly use your Trevi XT 101 BT speaker, simply refer to the section of the manual corresponding to your language. The available buttons allow you to:

Turn the device on/off with the Power button
Adjust the volume with the VOL+ and VOL- buttons
Switch between playback modes (Bluetooth, USB, Micro SD, AUX-IN) with the MODE button
Control the LED lights with the LIGHT button
Navigate through tracks with the previous/next buttons

The device operates the same way regardless of your region: the language only affects the reading of the documentation, not the operation of the speaker itself.

Question 10

How to set the time and date on the Trevi TT 1072 DAB turntable?

Accepted Answer

Your Trevi TT 1072 DAB turntable allows you to easily set the time and date via its system menu. Make sure the device is in standby mode before you begin (the screen displays the current time).

Steps to set the time and date:

Press and hold the MENU button (12) on the device. Use the directional buttons (< or >) to navigate through the menus and the SELECT button (25) to confirm your selection.
The SYSTEM menu will appear on the screen. Confirm with SELECT, then select the TIME item and confirm again.
Select the SET TIME/DATE option. The device will then allow you to set the current time and date using the directional buttons to adjust each parameter.
Next, select the 12/24 hour item to choose your preferred display format (12 hours or 24 hours).
Finally, select the AUTO UPDATE item to enable automatic updating of the time and date. You can choose synchronization via FM radio, DAB radio, or both sources simultaneously.

Once these settings are made and confirmed, the time and date on your Trevi TT 1072 DAB will be correctly configured. If you have enabled AUTO UPDATE, the device will automatically adjust the time based on the radio signal, ensuring optimal accuracy.

User manual Trevi : user manuals and guides in PDF

Models Trevi most viewed

Browse manuals Trevi by appliance type

Recent questions about devices Trevi