Question 1

What is the MUTE button on the MELICONI PERSONAL 3 remote control for?

Accepted Answer

Yes, the MUTE button is used to activate and deactivate the audio of your MELICONI PERSONAL 3 remote control.

When you press this button, the sound from the television is immediately cut off. Pressing it again restores the audio. It is a quick way to mute without using the volume buttons.

The manual also specifies a combined function: if you press ON/OFF and MUTE simultaneously for about 5 seconds (until the red light blinks), you access the configuration settings for the color buttons (Red-Green-Yellow-Blue).

Question 2

Why is the MELICONI PERSONAL 3 remote control flashing? (Flashing red light)

Accepted Answer

If the red light on your MELICONI PERSONAL 3 remote control is flashing, it means that the batteries are low and need to be replaced as soon as possible.

How to replace the batteries

Open the battery compartment
Remove the two used AAA/LR03 batteries
Insert two new alkaline AAA/LR03 batteries of 1.5 V
Close the compartment

Once the batteries are replaced, the light will stay on continuously when a button is pressed, and the flashing will stop.

Important: Never leave used or discharged batteries in the remote control, as they may leak and damage the device. Rechargeable batteries are not recommended, especially if their voltage is below 1.5 V.

Question 3

How to obtain and program the codes for the MELICONI PRATICO 6?

Accepted Answer

The MELICONI PRATICO 6 does not contain a built-in list of codes, but you can obtain them through three methods:

Internet (recommended): Visit www.meliconi.fr/guide to find the codes corresponding to your device (TV, SAT, TNT, DVD, PVR, or other audio/video devices), then program them directly.
SMS: Send a message to +39 345 7518893 with the format: "6A, Type, Brand, Model" (e.g., "6A, TV, Samsung, UA46ES5500") to receive the code via SMS.
Manual search: Press and hold the device button until the indicator blinks, then repeatedly press ON/OFF until the device responds.

To program a code: hold down the device selection button for about 6 seconds until the indicator blinks, release it, and then immediately enter the 3 or 4 digit code found using one of the three methods above.

Question 4

Is the MELICONI PRATICO 6 remote control compatible with Grundig televisions?

Accepted Answer

The MELICONI PRATICO 6 universal remote control is designed to be compatible with a wide range of television brands, including Grundig. However, compatibility may depend on the specific model of your Grundig television.

How to check compatibility:

Check the list of remote control codes provided with the MELICONI PRATICO 6, which usually includes codes for Grundig.
Perform an automatic code search if your remote allows it, to find the code corresponding to your Grundig television.
If the remote does not control your television after these steps, your Grundig model may not be supported.

In summary, the MELICONI PRATICO 6 is generally compatible with Grundig televisions, but it is important to test it with your specific model to be sure.

User manual MELICONI : user manuals and guides in PDF

Models MELICONI most viewed

Browse manuals MELICONI by appliance type

Recent questions about devices MELICONI