Is the ZenWiFi AX Hybrid XP4 compatible with devolo 1200+ powerline adapters?

Q: Is the ZenWiFi AX Hybrid XP4 compatible with devolo 1200+ powerline adapters?

The ZenWiFi AX Hybrid XP4 is equipped with a Powerline Backhaul function using the HomePlug AV1300 standard , allowing it to create an upstream link via your home's electrical network to connect the mesh system nodes together. However, compatibility with the Devolo 1200+ is not guaranteed . Devolo 1200+ adapters generally use the HomePlug AV standard (an earlier version), while the XP4 operates on AV1300. Although these two standards are technically backward compatible, they rarely work together at optimal speeds on the same electrical network. Potential issues : If you connect the Devolo 1200+ and the XP4 on the same electrical circuit, they may recognize each other but with degraded performance . The speed will be limited to the older version of the protocol (HomePlug AV), which can significantly reduce transfer speeds and cause connection instability. Additionally, the XP4 is designed to operate in a coherent system with other ASUS devices using AV1300. Recommendation : To avoid conflicts and performance issues, do not use the Devolo 1200+ simultaneously with the ZenWiFi XP4 system. If you already have the Devolo, it is advisable to prioritize the ASUS XP4 mesh system with PowerLine Backhaul rather than mixing the two brands. If you absolutely need to extend your network, prefer a wired Ethernet connection (Ethernet Backhaul) or WiFi 6 (WiFi Backhaul) between the XP4 nodes. To optimize Powerline on XP4 : Always connect cables directly to a wall outlet (no extensions), use grounded outlets (3 prongs), and avoid plugging into the same circuit as high-energy-consuming devices (radiator, washing machine, air conditioner).

Question

Accepted Answer

The ZenWiFi AX Hybrid XP4 is equipped with a Powerline Backhaul function using the HomePlug AV1300 standard, allowing it to create an upstream link via your home's electrical network to connect the mesh system nodes together.

However, compatibility with the Devolo 1200+ is not guaranteed. Devolo 1200+ adapters generally use the HomePlug AV standard (an earlier version), while the XP4 operates on AV1300. Although these two standards are technically backward compatible, they rarely work together at optimal speeds on the same electrical network.

Potential issues: If you connect the Devolo 1200+ and the XP4 on the same electrical circuit, they may recognize each other but with degraded performance. The speed will be limited to the older version of the protocol (HomePlug AV), which can significantly reduce transfer speeds and cause connection instability. Additionally, the XP4 is designed to operate in a coherent system with other ASUS devices using AV1300.

Recommendation: To avoid conflicts and performance issues, do not use the Devolo 1200+ simultaneously with the ZenWiFi XP4 system. If you already have the Devolo, it is advisable to prioritize the ASUS XP4 mesh system with PowerLine Backhaul rather than mixing the two brands. If you absolutely need to extend your network, prefer a wired Ethernet connection (Ethernet Backhaul) or WiFi 6 (WiFi Backhaul) between the XP4 nodes.

To optimize Powerline on XP4: Always connect cables directly to a wall outlet (no extensions), use grounded outlets (3 prongs), and avoid plugging into the same circuit as high-energy-consuming devices (radiator, washing machine, air conditioner).

User manual ASUS Network card : user manuals and guides in PDF

Models ASUS Network card most viewed

Other categories ASUS

Recent questions about Network card ASUS