How to use the drying only function on the HOTPOINT AQD1070D69 washer-dryer?

Question

Accepted Answer

Procedure to use the drying only function:

Turn on the appliance: Press the ON/OFF button. The POWER/PAUSE light blinks slowly in green, indicating that the appliance is ready.
Load the wet laundry: Open the door and place the wet or slightly spun laundry inside. Do not exceed the maximum drying capacity of 7 kg (for full loads, you can dry in stages).
Select the drying program: Turn the program knob to 12 (Cotton), 13 (Synthetic) or 14 (Wool), depending on the type of fabric to be dried. Close the door.
Choose the drying level: Press the DRYING button to select the desired moisture level from the four available options: Ready to iron (A1) for slightly damp laundry, On hanger (A2) for partial drying, Ready to store (A3) for storage without ironing, or Intensive (A4) for complete drying. You can also choose a fixed duration of 30 to 180 minutes.
Activate the Eco option (optional): To save energy when drying cotton, press the Eco button. The machine will automatically dry at level A2 with an optimal combination of temperature and duration.
Start the cycle: Press the POWER/PAUSE button. The light turns solid green, the door locks, and drying begins.

Important points to follow:

Ensure that the water tap is fully open during drying, as the machine operates with a condensation system that requires water.
Do not stop the cycle before it ends. A cooling cycle without heat automatically triggers at the end of drying to protect the clothes. If you interrupt before the end, immediately remove the laundry and spread it out to cool quickly.
At the end of the program, the display shows "END" and the door unlocks automatically. Open the door, empty the laundry, and turn off the appliance.

User manual HOTPOINT Washer dryer : user manuals and guides in PDF