How to connect a condenser microphone to the Fender Acoustic Junior amp?

Q: How to connect a condenser microphone to the Fender Acoustic Junior amp?

The Fender Acoustic Junior has two XLR/jack combo input jacks (Channel 1 and Channel 2) that accept condenser microphones. Here’s how to connect your microphone: Connecting the Microphone Use a standard XLR cable to connect your condenser microphone to one of the two combined XLR input jacks on the amp. The amp provides 16V phantom power , necessary to power condenser microphones. Make sure your microphone accepts this voltage. Adjust the microphone input level using the gain potentiometers (GAIN) located on the front panel of the amp to achieve a good level without distortion. Tip Ensure that the XLR cable is fully inserted into the jack and locked (the XLR connector turns to lock). Condenser microphones, unlike dynamic microphones, require phantom power to operate correctly.

Question

Accepted Answer

The Fender Acoustic Junior has two XLR/jack combo input jacks (Channel 1 and Channel 2) that accept condenser microphones. Here’s how to connect your microphone:

Connecting the Microphone

Use a standard XLR cable to connect your condenser microphone to one of the two combined XLR input jacks on the amp.
The amp provides 16V phantom power, necessary to power condenser microphones. Make sure your microphone accepts this voltage.
Adjust the microphone input level using the gain potentiometers (GAIN) located on the front panel of the amp to achieve a good level without distortion.

Tip

Ensure that the XLR cable is fully inserted into the jack and locked (the XLR connector turns to lock). Condenser microphones, unlike dynamic microphones, require phantom power to operate correctly.

User manual FENDER Guitar amp : user manuals and guides in PDF

Models FENDER Guitar amp most viewed

Other categories FENDER

Recent questions about Guitar amp FENDER