What should I do if the programmer of my PROLINE LL-1020V machine no longer turns?

Question

Accepted Answer

If the programmer (program selector control) of your PROLINE LL-1020V no longer turns, first check that you are not forcing the lever in the wrong direction. The manual clearly specifies to turn this control only clockwise to advance to the desired program. Never attempt to force it in the opposite direction, as this will block the mechanism.

Also, check that the lever is not at the STOP position, which indicates the end of the current program. If you have pressed the start/stop button, wait a few minutes for the cycle to stop naturally before turning the programmer again.

Check the power supply by ensuring that the device is properly plugged in and that the outlet is working. A power outage or a fault in the power supply can immobilize the programmer.

If a garment or object seems to be blocking the internal mechanism, stop any forcing immediately. Try a reset by cutting off the power for 5 minutes, then plug the device back in.

If after these checks the programmer remains stuck or still does not turn, the fault is mechanical or electronic. The manual states that no internal components are user-replaceable. You must contact PROLINE customer service for professional assistance.

User manual PROLINE Washing machine : user manuals and guides in PDF

Models PROLINE Washing machine most viewed

Other categories PROLINE

Recent questions about Washing machine PROLINE