User manual DELONGHI Dehumidifier : 32 free PDF user manuals

Q: What does error code E2 mean on my AriaDry Slim DES 16W dehumidifier?

The error code E2 indicates a humidity sensor fault (coil sensor fault) on your DELONGHI AriaDry Slim DES 16W dehumidifier. Troubleshooting Unplug the device from the electrical outlet Wait 10 to 15 minutes Plug the dehumidifier back in and restart it This reset often resolves false positives from the sensor. If the error persists If the E2 code reappears after restarting, it indicates a real malfunction of the humidity sensor. In this case, the component will likely need to be replaced. We recommend contacting DELONGHI customer service for assistance under warranty.

Q: Where can I find figure 6 in the Tasciugo AriaDry Multi manual?

Figure 6 can be found in the Anti-allergen Filter section of the PDF. It illustrates how to install the filter in its designated housing on the rear grille of the device. To locate the figure quickly: Refer to the chapter dedicated to maintenance and upkeep Look for the section mentioning the rectangular filter You will find the diagram showing exactly how to position the filter in its designated spot If the diagram is not immediately visible, remember the key point: the anti-allergen filter must fit into the designated housing on the rear grille of the device.

Q: What is the rectangular strip on my dehumidifier and where should I place it?

According to the DEX212SF manual, the rectangular strip you are identifying could correspond to one of the following two possibilities: Optional anti-allergen filter: The DEX212SF model accepts a removable anti-allergen filter that comes in the form of a rectangular strip. This filter fits into its designated slot on the rear grille of the unit. It should be replaced every 2 years. Handle or transport strap: If the strip is located on the top of the unit, it is the lifting handle that facilitates the transport and movement of the dehumidifier. If your model comes with an anti-allergen filter, make sure it is properly inserted at the back of the unit. For any other specific application not mentioned here, please refer to the detailed diagrams in your paper manual.

Q: Why does the ventilation stop when I activate the dehumidification mode?

This behavior is completely normal and is part of the design of the Tasciugo AriaDry Compact DDS 25. Here’s how the two modes work: Ventilation Mode (button B2) - The ventilation runs continuously at the speed you have chosen (LOW, MED, or HIGH). The dehumidification compressor is not active. Dehumidification Mode (button B3) - The device actively reduces humidity to the level you have set (between 30 and 70% relative humidity). Once this level is reached, the device then operates at a very low speed to simply maintain this humidity level . This is intelligent management that saves energy. To have both strong ventilation and dehumidification: You can simultaneously activate the Ventilation button (B2) and the Dehumidification button (B3). This way, the dehumidification compressor works actively while the ventilation operates at the speed you choose. If your room is very humid, you can also use the Dry mode (button B6) which automatically operates at maximum dehumidification capacity.

Models DELONGHI Dehumidifier most viewed

User manual DELONGHI Dehumidifier : user manuals and guides in PDF

Models DELONGHI Dehumidifier most viewed

Other categories DELONGHI

Recent questions about Dehumidifier DELONGHI