How to disable the S Saver function on the TEKA NFE 910 X freezer?

Q: How to disable the S Saver function on the TEKA NFE 910 X freezer?

To disable the Screen Saver (S Saver) function on your TEKA NFE 910 X freezer, you need to press the [screen.saver] button (identified as [s.saver] on the panel) and hold it for 3 seconds . This function saves energy by turning off the lighting of the touch digital panel. When you hold the button for 3 seconds, the screen will reactivate its normal lighting and the Screen Saver will be disabled. Detailed steps: Make sure the freezer is turned on and the touch control panel is visible. Locate the [screen.saver] or [s.saver] button on the digital indicator panel. This button is clearly labeled on the dashboard. Press this button and hold it down for exactly 3 seconds . Simply pressing it once is not enough. Release the button. You will see the panel lighting return to its normal operation, confirming that the Screen Saver is disabled. Additional information: The Screen Saver is an energy management function that turns off the lights of the digital control panel. This function is useful for reducing the power consumption of your appliance. If you wish to reactivate this mode later, you need to press the [screen.saver] button again for 3 seconds. If you encounter difficulties or if the panel does not respond, check that the appliance is not in child lock mode (which blocks other buttons) by pressing [cooler] + [zone 2] simultaneously for 5 seconds.

Question

Accepted Answer

To disable the Screen Saver (S Saver) function on your TEKA NFE 910 X freezer, you need to press the [screen.saver] button (identified as [s.saver] on the panel) and hold it for 3 seconds. This function saves energy by turning off the lighting of the touch digital panel. When you hold the button for 3 seconds, the screen will reactivate its normal lighting and the Screen Saver will be disabled.

Detailed steps:

Make sure the freezer is turned on and the touch control panel is visible.
Locate the [screen.saver] or [s.saver] button on the digital indicator panel. This button is clearly labeled on the dashboard.
Press this button and hold it down for exactly 3 seconds. Simply pressing it once is not enough.
Release the button. You will see the panel lighting return to its normal operation, confirming that the Screen Saver is disabled.

Additional information: The Screen Saver is an energy management function that turns off the lights of the digital control panel. This function is useful for reducing the power consumption of your appliance. If you wish to reactivate this mode later, you need to press the [screen.saver] button again for 3 seconds. If you encounter difficulties or if the panel does not respond, check that the appliance is not in child lock mode (which blocks other buttons) by pressing [cooler] + [zone 2] simultaneously for 5 seconds.

User manual TEKA Freezer : user manuals and guides in PDF

Models TEKA Freezer most viewed

Other categories TEKA

Recent questions about Freezer TEKA