Why does my DOMO DO716BL blender display an error message?

Question

Accepted Answer

The DOMO DO716BL blender can display different error messages depending on the encountered problem. Here are the most common error codes and faults and how to resolve them:

Error message E1: This code generally indicates a problem related to the addition of liquid. First, check that you have filled the device between the minimum (1200 ml) and maximum (2200 ml) levels marked inside. Also, ensure that the bottom of the bowl is covered with liquid. If the error persists, the overflow sensor may be dirty. Gently clean it with a damp cloth. If you have poured too much liquid, empty some of the contents.

Repeated beeping and program flashing: This generally indicates an imminent overflow. The device has an overflow protection. Pour some of the liquid out of the device to bring it back to normal levels. The sensor may also be clogged; clean it with a damp cloth.

The device stops during operation: This can have two causes. Either you have not added enough liquid, as the device is equipped with a dry cooking safety that automatically shuts it off. Or the device has overheated. Indeed, the DOMO DO716BL has an overheating protection that triggers if you cook several soups consecutively without allowing the device to cool between cycles. In this case, empty the device and let it cool for about 30 minutes before reusing it. This same safety triggers if you use the Blend/clean function for more than 20 seconds without interruption; wait 10 seconds before trying again.

The panel lights do not turn on: Check that the power cord is properly plugged into the power connection at the back of the device. Try another electrical outlet to eliminate a circuit problem.

The program light is flashing but the device does not work: You may have selected the program but forgot to press the START/STOP button to confirm it. Press the start button.

Cover issue: The device can only operate if the lid is properly closed. If too many ingredients are in the bowl, the lid will not close properly; remove some ingredients. Also, ensure that the lid is properly in place on the container before plugging in the device.

To prevent food from sticking to the bottom, always pour at least one cup of water or broth with your ingredients. Strictly adhere to the minimum-maximum levels indicated inside the blender (1200 ml minimum, 2200 ml maximum) for optimal operation of all safety protections.

User manual DOMO Blender : user manuals and guides in PDF

Models DOMO Blender most viewed

Other categories DOMO

Recent questions about Blender DOMO